• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.774-783
• /
• 2012

In this paper, a periodically corrugated transmission line is proposed. The proposed transmission line can reduce crosstalk between transmission lines. The corrugated transmission line can adjust the amount of inductive coupling and capacitive coupling equally. Thus, the crosstalk is effectively reduced because the inductive coupling and capacitive coupling cancel each other. The corrugated transmission line is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm. The simulated far-end crosstalks of conventional transmission line and corrugated transmission line with a period of A=1 mm have maximum values of -3.6 dB and -22 dB, respectively, up to 30 GHz. Measurement results showed that far-end crosstalks of the conventional and corrugated transmission line have maximum values of -6.3 dB and -20.5 dB, respectively, up to 30 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1036-1042
• /
• 2005

The crosstalk between bent transmission lines and the effects of additional trace with the metal filled via holes on alleviating the crosstalk are investigated using the circuit concept approach for transmission line sections and impedance modeling for via hole sections. All sections are represented by ABCD matrices and then cascaded. Finally the calculated results by proposed method are confirmed that they agree with the measured results in less than 3 dB except a band of low frequency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.232-239
• /
• 2010

By using the clock timing control at transmitter (TX), the crosstalk-induced jitter (CIJ) is compensated for in the 2-bit parallel data transmission through the coupled microstrip lines on printed circuit board (PCB). Compared to the authors' prior work, the delay block circuit is simplified by combining a delay block with a minimal number of stages and a 3-to-1 multiplexer. The delay block generates three clock signals with different delays corresponding to the channel delay of three different signal modes. The 3-to-1 multiplexer selects one of the three clock signals for TX timing depending on the signal mode. The TX is implemented by using a $0.18\;{\mu}m$ CMOS process. The measurement shows that the TX reduces the RX jitters by about 38 ps at the data rates from 2.6 Gbps to 3.8 Gbps. Compared to the authors' prior work, the amount of RX Jitter reduction increases from 28 ps to 38 ps by using the improved implementation.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.7
• /
• pp.10-16
• /
• 1999

This paper describes a low voltage swing bus driver using FCSR(Feedback Control Swing voltage Reduction) which can control bus swing voltage within a few hundred of mV. It is proposed to reduce power consumption in On-chip interface, especially for MDL(Merged DRAM Logic) architecture wihich has wide and large capacitance bus. FCSR operates on differential signal dual-line bus and on precharged bus with block controlling fuction. We modeled driver and bus to scale driver size automatically when bus environment is variant. We also modeled coupling capacitance noise(crosstalk) of neighborhood lines which operate on odd mode with parallel current source to analysis crosstalk effect in the victim-line according as voltage transition in the aggressor-line and environment in the victim-line. We built a test chip which was designed to swing 600mV in bus, shows 70Mhz operation at 3.3V, using Hyundai 0.8um CMOS technology. FCSR operate with 250Mhz at 3.3V by Hspice simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.339-346
• /
• 2010

For the implementation of the crosstalk canceller, the filters with large length are needed, which is because that the length of the filters greatly depends on the length of the head-related impulse responses. In order to reduce the length of the crosstalk cancellation filters, many methods such as frequency warping, common acoustical pole and zero (CAPZ) modeling have been researched. In this paper, we propose a new method combining these two methods. To accomplish this, we design the filters using the CAPZ modeling on the warped domain, and then, we implement the filters using the poles and zeros de-warped to the linear domain. The proposed method provides improved channel separation performance through the frequency warping and significant reduction of the complexity through the CAPZ modeling. These are confirmed through various computer simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.184-199
• /
• 2024

Residual crosstalk has been considered as a major drawback of conventional time-reversal processing in the case of simultaneous multiple focusing. In this paper, the Gram-Schmidt process is applied to time-reversal processing to mitigate crosstalk in ocean waveguides for multiple probe sources. Experimental data-based numerical simulations confirm that nulls can be placed at multiple locations, and it is shown that different signals can be simultaneously focused at different probe source locations, ensuring distortionless responses in terms of active time-reversal processing. This focusing property is also shown to be much less affected by a reduction in the number of receivers than the adaptive time-reversal mirror method. The proposed method is shown to be effective in eliminating crosstalk in passive multi-input multi-output communications using sea-going data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.660-667
• /
• 1998

In this paper, we used differential amplifiers to reduce crosstalk in a wireless in-house optical interconnection in which two channel beams are overlapped. Experimental results show that environmental optical noise is also reduced using the same principle. This method is realized very easily with differential amplifiers without any optical filters or electrical filters. It is very useful in short distance optical interconnections.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1336-1341
• /
• 2009

In this paper, an EMI reduction effects using an EMC chamber is described and reduction methods is proposed. In the case of general electronic components a working frequency is low. But in this paper the vehicle cluster works 75MHz in the main clock frequency, becoming weak by noise because of being attached in TFT LCD. As the outer case installed in the vehicle is made up of plastic materials, the noise is radiated if not protecting noise in the PCB itself. Therefore, This paper will explain the theoretical basis and propriety with respect to the discussion and need about the guide for PCB design considering EMC, through the reduction of PCB noise.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.288-290
• /
• 2001

서로 인접한 두 개의 무선광통신 빔에서 발생하는 혼신을 소거하기 위하여 수신부에 편광기를 사용하였다. 광원측에서는 두 개의 레이저다이오드의 편파가 서로 수직하도록 설치하고 수신부에서는 각각의 편파에 일치하도록 편광기를 설치한 자동정렬형 광검출기를 구성하였다. 수신부의 포토다이오드는 각각의 편파에 일치하는 빔의 최대점을 찾아서 자동적으로 정렬한다. 두 개의 광원의 파장이 유사하여 광학적 필터로 혼신의 소거가 어려운 구간에서 이 구조를 사용하면 쉽게 혼신을 해소한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.640-643
• /
• 2003

A Walsh function based associative memory is capable of storing m patterns in a single pattern storage space with Walsh encoding of each pattern. Furthermore, each stored pattern can be matched against the stored patterns extremely fast using algorithmic parallel processing. As such, this special type of memory is ideal for real-time processing of large scale information. However this incredible efficiency generates large amount of crosstalk between stored patterns that incurs mis-recognition. This crosstalk is a function of the set of different sequencies [number of zero crossings] of the Walsh function associated with each pattern to be stored. This sequency set is thus optimized in this paper to minimize mis-recognition, as well as to maximize memory saying. In this paper, this Walsh memory has been applied to the problem of face recognition, where PCA is applied to dimensionality reduction. The maximum Walsh spectral component and genetic algorithm (GA) are applied to determine the optimal Walsh function set to be associated with the data to be stored. The experimental results indicate that the proposed methods provide a novel and robust technology to achieve an error-free, real-time, and memory-saving recognition of large scale patterns.