• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.126-131
• /
• 2004

As a noninvasive imaging method, optical coherence tomography system has been extensively studied because it has some advantages such as imaging of high resolution, low cost, and compact size configuration. In order to improve the SNR of OCT system, two types of interferometers were configured and then, we compared simulation with measurement of reference sample. In the OCT system is configured with Michelson interferometer, the contrast of cross-sectional image is reduced with low SNR detection which is due to loss of feedback interference signal from light source part. Also, in order to image measured data with real time, image processing program is constructed. From results of simulation, it is confirmed that improved Michelson interferometer is improved about 10[dB] with a 50 : 50 fiber coupler. And from the measurement of reference sample, about 5[dB] is improved with a 50 : 50 fiber coupler. It is confirmed that the OCT system is configured with the improved Michelson interferometer which has a good distinctive cross-sectional image due to higher contrast.

• Structural Engineering and Mechanics
• /
• v.56 no.4
• /
• pp.667-694
• /
• 2015

The suspended dome system is a new structural form that has become popular in the construction of long-span roof structures. Suspended dome is a kind of new pre-stressed space grid structure that has complex mechanical characteristics. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The length of the strut, the cable initial strain, the cross-sectional area of the cables and the cross-sectional size of steel elements are adopted as design variables and the minimum volume of each dome is taken as the objective function. The topology optimization on lamella dome is performed by considering the type of the joint connections to determine the optimum number of rings, the optimum number of joints in each ring, the optimum height of crown and tubular sections of these domes. A simple procedure is provided to determine the configuration of the dome. This procedure includes calculating the joint coordinates and steel elements and cables constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). This paper explores the efficiency of lamella dome with pin-joint and rigid-joint connections and compares them to investigate the performance of these domes under wind (according to the ASCE 7-05), dead and snow loading conditions. Then, a suspended dome with pin-joint single-layer reticulated shell and a suspended dome with rigid-joint single-layer reticulated shell are discussed. Optimization is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for suspended domes.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.261-267
• /
• 2017

Purpose: Analyzing different patterns of maxillary sinus septa in cone-beam computed tomography (CBCT) images and predicting maxillary sinus membrane perforations. Materials and Methods: In this cross-sectional study, CBCT images of 222 patients ranging from 20 to 81 years old were evaluated. One hundred fifty-two patients (93 females and 59 males) who had maxillary sinus septa in axial views were included in this study. Cross-sectional images were used to determine classifications of sinus septa and the risk of membrane perforation using a method modified from Al-Faraje et al. Variables of sex, age, and dental status were considered. Chi-squared and Kruskal-Wallis tests were used for data analysis(P<.05). Results: In this study, 265 maxillary sinus septal patterns were found. The mean age of the patients was $44.1{\pm}14.7$ years old. The Class I and VII-div II patterns had the greatest and least prevalence, respectively. Furthermore, there was a significant relationship between the location of septa and the frequency of membrane perforation risk (P<.05). In this study, the relationship of different patterns of septa with dental status did not differ significantly (P>0.05). Conclusion: A higher prevalence of moderate risk of membrane perforation in the molar region relative to the premolar region was observed. Furthermore, maxillary sinus septa occur most frequently in the molar region, demonstrating the importance of paying attention to this region during sinus lift surgery. This study did not show any relationship between tooth loss and the presence of septa.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.186-197
• /
• 1995

Site-specific allometric equations relating aboveground tree component biomass and leaf area to tree diameter, basal area, sapwood cross-sectional area and sapwood volume were developed using the destructive harvesting method for Pinus rigida Mill., Larix leptolepis Gordon, and Quercus serrata Thunb. stands in Yangpyeong, Kyonggi Province. There were significantly strong correlations between aboveground tree component biomass or leaf area and diameter at breast height (DBH), basal area, sapwood area and sapwood volume. For a similar diameter tree, the three species had a similar stem wood biomass. However, carbon allocation patterns to stem bark, foliage, branch and total aboveground biomass differed among the three species. Specific leaf area and the ratio of leaf area to sapwood cross-sectional area of the three species were significantly different. Allometric equations seemed To be related to leaf habit or leaf longevity. To elucidate the effect of leaf habit or leaf longevity on allometry and canopy characteristics clearly, more intensive studies are needed.

• Korean Journal of Community Nutrition
• /
• v.2 no.1
• /
• pp.3-12
• /
• 1997

One-to three -month-old infants(n=252) were compared their growth performance(weight, length, head circumference, chest circumference) by feeding methods in cross-sectional study. There were two groups : breast-fed(BF) and formula-fed groups(FF). The weights of infants at 1, 2, and 3 postpartum month were 4.50$\pm$0.48kg, 5.76$\pm$0.62kg and 6.67$\pm$0.68kg, respectively. The weigh of male infants was higher than females. The length were 53.7$\pm$2.6cm, 57.4$\pm$3.3cm, 61.1$\pm$3.1cm at one to three postpartum months, respectively. The length of male infants was higher than females, too. Overall there were no significant differences between feeding methods in weight, length, head and chest circumferences, and monthly weight and length velocity. But 3-month-old formula-fed male infants showed bigger significantly in weight, monthly weight velocity and chest circumference than the breast-feds. By Korean standards, weight-for-height Z-score were distributed from 0 to ＋2. Not only was there a few malnourished infants but also overnourished were noticed, especially in formula-fed group. From this survey, long-time survey on growth and development of large scales might be necessary to determine the effect of feeding methods of infants after 3 months and to set proper grwoth standard for infant. And it was suggested the that the careful attention of polarized nutritional problems of early infants was needed, especially in formula-fed group. (Korean J Community Nutrition 2(1) : 3~12, 1997)

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.337-344
• /
• 2016

The purpose of this study was to evaluate the radiolucency for the phantom output to the 3D printing technology. The 3D printing technology was applied for FDM (fused deposition modeling) method and was used the material of ABS (acrylonitrile butadiene styrene) resin. The phantom was designed in cylindrical uniformity. An image uniformity was measured by a cross-sectional images of the 3D printed phantom obtained from the CT equipment. The evaluation of radiolucency was measured exposure dose by the inserted ion-chamber from the 3D printed phantom. As a results, the average of uniformity in the cross-sectional CT image was 2.70 HU and the correlation of radiolucency between PMMA CT phantom and 3D printed ABS phantom is found to have a high correlation to 0.976. In the future, this results will be expected to be used as the basis for the phantom production of the radiation quality control by used 3D printing technology.

• Korean Journal of Optics and Photonics
• /
• v.29 no.3
• /
• pp.99-103
• /
• 2018

Optical coherence elastography (OCE) is based on optical coherence tomography (OCT), which is a noninvasive, high-resolution, cross-sectional imaging technique. In this paper, we have developed dynamic optical coherence elastography to measure elasticity, a mechanical property of tissue, by phase difference. A piezoelectric actuator was used for sinusoidal mechanical loading of samples. Before applying this method to biomaterial, we assessed the feasibility of OCE with samples of sponge, eraser, and sharp lead. Cross-sectional and phase-difference images of the sample were obtained under sinusoidal loading. The strain rate was calculated from the phase-difference information. To obtain the envelope of the phase-difference oscillations along the horizontal direction, Hilbert transformation was performed at each depth. The elevation of the envelope was represented by color mapping, and we could measure the relative elasticity within the sample by comparing the elevations. Finally, there was an advantage when we calculated the shear rate using self-interference in the sample arm, instead of the interference between sample and reference arms.

• Journal of Acupuncture Research
• /
• v.35 no.4
• /
• pp.207-213
• /
• 2018

Background: The purpose of this study was to examine the effect of Dokhwalgisaeng-tang on immobilization-induced muscle atrophy. Methods: Twenty young male Sprague-Dawley rats were divided into 2 groups. The rats in Dokhwalgisaeng-tang group were orally administered Dokhwalgisaeng-tang water extract, and the rats in the control group were given saline only. Hind limb immobilization was performed with casting tape to keep the left ankle joint in a fully extended position. No intervention was performed on the right leg which was used as an intact region. After 2 weeks of immobilization, all animals were sacrificed, and the gastrocnemius muscle was dissected from both legs and weighed. The morphology of the right and the left gastrocnemius muscle in both the Dokhwalgisaeng-tang and the control group was assessed by hematoxylin and eosin staining. The muscle cross sectional area was examined by image analysis (Axiovision LE software). In addition, immunohistochemical staining was carried out using the free-floating method, and the number of apoptotic related proteins were counted (anti-BAX, anti-Bcl-2). Results: Dokhwalgisaeng-tang showed a significant protective effect against the reduction of the left gastrocnemius muscle (weight and muscle cross sectional area) compared with the control group. Moreover, the treatment with Dokhwalgisaeng-tang significantly reduced protein expression of BAX and increased protein expression of Bcl-2 in the gastrocnemius muscle compared with the control group. Conclusion: Dokhwalgisaeng-tang showed protective effects against disuse muscle atrophy, potentially through altered BAX and Bcl-2 protein expression in the gastrocnemius muscle.

• Imaging Science in Dentistry
• /
• v.35 no.2
• /
• pp.97-103
• /
• 2005

Purpose : To determine if ultrasonography is a reliable technique to assess masseter muscle sites within intra- and interobserver and the scanning level and/or the muscle condition affect local cross-sectional dismension (LCSD) measurements of masseter muscle. Materials and Methods : 10 subjects without sign and symptom of temporomandibular disorders and missing posterior teeth were examined by ultrasonography. Bilateral ultrasonographic examinations were performed with a linear (B-scan) 7.5 MHz small-part transducer to register LCSDS of the masseter muscle on three different levels. Scans were made on relaxed and clenching condition. Three oral and maxillofacial radiologists measured at two sessions with a time interval of at least 5 minutes. Results : Variables such as 'condition' and 'level' had a significant effect on muscle measurements (p<0.05). There was no significant difference between 'sessions'(p>0.05) and 'observers' (p>0.05). LCSDS on lower scan level were significantly thinner than those on upper and middle level. Those on clenching condition were significantly thicker than those on relaxed condition (p<0.05). The scanning level with the highest reproducibility was middle with clenching condition (ICC=0.90, $MSE=0.55\%$). Conclusion : The data suggested that ultrasonography was a reliable method for measuring LSCD of masseter muscle in intra- and Interobserver and middle scan level showed the most reliable data.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.55-61
• /
• 2015

In this paper, the displacement behavior characteristic of hollow rollers with various cross sectional area profiles and circular plate for load supporting capacity increment has been presented using a finite element method. The FEM results present that the hollow roller with X-shaped or Y-shaped columns between outer tube, middle tube and inner tube reduces a maximum displacement at the middle length of hollow rollers. And the circular plate, which is inserted at the middle of the hollow roller, is very useful to reduce the maximum displacement of hollow rollers with the plate thickness of 30~40mm. This paper presents the weight vs the maximum displacement ratio in which is represented for the optimized design as a function of a hollow roller total weight. The FEM analyzed results recommend the design model 4, 5 and 6 of hollow rollers for decreasing the ratio of maximum displacement and total weight of hollow rollers.