• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1109-1113
• /
• 2001

Interior parts of a vehicle are getting important to reduce interior noise of car. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for meddle of high frequency range analysis with interior parts. This article introduces an example of the application of SEA to predict air born noise of cabin of car.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.10-13
• /
• 2020

High-quality superconducting coplanar waveguide (SCPW) resonators are crucial for developing superconducting quantum information devices and sensors. We designed quarter-wavelength SCPW resonators and fabricated the SCPW resonators using Nb thin film. The resonant characteristics were measured at T = 4.2 K, revealing the intrinsic quality factor and the coupling quality factor to be Qi = 4,784 and Qc = 17, 980, respectively. Our design and fabrication techniques would be very useful to develop a gate-tunable superconducting qubit based on the semiconductor nanostructures.

• 대한전자공학회논문지
• /
• 제11권6호
• /
• pp.1-15
• /
• 1974

본 연구는 탄성파 지연선에 이용되는 탄성표면파중에서 SH표면파 모우드에 대하여 이론적 해석을 하였으며 그 결과 전기-기계적 결합계수가 크며 또한 여전 매질내 깊이 방향으로 아주 작은 감쇠률을 갖고 표면을 따라 전파됨을 알았단. 예로서 PZT-4인 경우 에너지의 80%가 감쇠되는 깊이는 190파장이 된다. 또한 탄성표면파 지연선을 하나의 계단자강으로서 취급하여 삽입손실를 구하였으며 특히 SH표면파 모우드와 같이 전기-기계론 결합계수가 큰 경우는 인터디지탈 트랜스듀셔의 전극폭과 윤극간 간격 사이의 비에 따라 중심 주파수가 현저히 달라진다. 그리고 탄성파 지연선의 온도계수를 벌크파인 종파, 횡파에 대하여 구하였으며 LiTaO2 Z축방향 전파의 횡파는 지연시간의 온도계수가 5.4X10-6/℃로 아주 작아짐을 알았다. 또한 LiNbO3의 130°, 64° 로테이트 Y캇트, X전파의 탄성표면파의 온도계수가 이론치와 잘 일치함을 실험적으로 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.935-941
• /
• 2006

In this paper, the dielectric and piezoelectric properties of $0.4Pb(Ni_{1/3}Nb_{2/3})O_3+0.6Pb(Zr_{405}Ti_{595})O_3+X\;wt%\;Fe_2O_3$ ceramics were investigated with the addition of $Fe_2O_3$ and sintering temperature. Dielectric constant and piezoelectric constant increased with amount of $Fe_2O_3$ to 0.25 wt% and then decreased the further addition of $Fe_2O_3$. It seems that $Fe_2O_3$ acts as a sintering aid at the sintering temperature of $1150^{\circ}C$. By the addition of $Fe_2O_3$., sintering temperature of the system was lowered from $1250^{\circ}C\;to\;1100^{\circ}C$. The piezoelectric properties showed the maximum value of ${\varepsilon}r=4669,\;d_{33}=810(10^{-12}m/V)$, kp = 77 %, Qm = 55, in $0.4Pb(Ni_{1/3}Nb_{2/3})O_3\;-0.6Pb(Zr_{0.405}Ti_{0.595})O_3+0.25wt%\;Fe_2O_3$ ceramics having composition near the morphotropic phase boundary. The composition may be appropriate for actuator materials because of high piezoelectric constant and electromechanical coupling factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1487-1488
• /
• 2011

Electrical properties and microstructure were investigated on the effects of $MnO_2$ and the lead-free $(Na_{0.44}K_{0.52}Li_{0.04})(Nb_{0.83}Sb_{0.07}Ta_{0.1})O_3$ ceramics with the addition of $MnO_2$ were fabricated by a conventional mixed oxide method. A gradual change in the crystal and microstructure was observed with the increase of $MnO_2$ addition. For the NKN-LST-xmol%$MnO_2$ sintered at $1100^{\circ}C$, bulk density increased with the addition of $MnO_2$ and showed maximum value at addition 1.0mol% of $MnO_2$. Curie temperature of the NKN-LST ceramics slightly decreased with adding $MnO_2$. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased below 0.25mol% of $MnO_2$ addition, which might be due to the increase in density. The high piezoelectric properties = 145 pC/N, electromechanical coupling factor = 0.421 and dielectric constant = 2883 were obtained for the NKN-LST-0.25mol%$MnO_2$ sintered at $1100^{\circ}C$ for 4h.

• Journal of Nutrition and Health
• /
• 제19권6호
• /
• pp.374-381
• /
• 1986

CCK ( Cholecystokinin)와 carbachol (carbamylchline chloride)이 췌장의 효소분비능력을 촉진시킨다는 사실은 잘 알려져있다. 생대두식이를 먹인 쥐에서 췌장세포의 hypertrophy 현상이 두드러지게 나타나고 소화효소의 과다분비 현상이 나타나므로 이번 실험에서는 익힌 대두와 생대두를 먹인 후 정상적인 췌장세포와 hypertrophy 가 일어난 췌장세포에 CCK 와 carbachol 로 자극을 준후 효소분비 능력을 비교하였다. 췌장세포에서 분해되는 단백질 분해효소들이 세포자체에 미치는 영향을 최소한으로 줄이기 위하여 췌장의 acinar cell을 분리한 후 cell column을 만들어 superfusion technique 에 의해 stimulus-enzyme secretion coupling 방법을 사용하였다. 분리한 췌장세포를 CCK와 carbachol 로 자극을 주었을대 chymotrysin 분비는 생대두를 먹인 쥐의 세포에서 익힌 대두를 먹인 군보다 높게 나타났고 amylase의 분비는 chymotrypsin 과는 달리 익힌 대두를 먹인 쥐의 세포에서 생대두를 먹인 군보다 높게 나타났다. 이번 실험의 결과는 지금까지 논쟁중에 있는 췌장의 acinar cell에서의 여러 가지 효소분비 비율은 항상 일정한 것이 아니라 자극의 종류에 따라 효소분비량의 구성비율이 달라진다는 것을 알려주고 있다.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.506-510
• /
• 2012

In this study, lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics were fabricated by conventional mixed oxide method. Structural and electrical properties of lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics with the variation of sintering temperature were investigated. As results of x-ray diffraction analysis, all specimens showed a typical polycrystalline perovskite structure without presence of the second phase. Sintered density increased with an increases of sintering temperature and the specimen sintered at $1,020^{\circ}C$ showed the maximum value of 4.5 $g/cm^3$. The average grain size of the $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimen sintered at $1,020^{\circ}C$ is about 0.83 ${\mu}m$. Electromechanical coupling factor, relative dielectric constant and dielectric loss of $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimens sintered at $1,020^{\circ}C$ were 0.252, 741 and 0.043% respectively.

• 전자공학회논문지 IE
• /
• 제48권2호
• /
• pp.40-46
• /
• 2011

본 연구에서는 테입-케스팅 방법을 이용하여 제작한 PZT-5A의 소결온도 변화에 따른 압전특성을 조사한 후 유한요소 해석법을 이용하여 2-2형 압전복합재료를 초음파 트랜스듀서를 설계하고 압전특성을 해석하였다. 2-2형 압전복합재료의 음향임피던스와 압전전하상수($d_{33}$)는 PZT 부피분율이 감소함에 따라 밀도의 감소로 감소하여 0.6~0.2의 범위에서 14~3 MRayl로 초음파 트랜스듀서로 사용가능한 특성을 나타내었다. 공진특성과 전기기계결합계수는 PZT부피분율이 0.6일 때 가장 우수한 특성을 나타내었으며, PZT의 부피분율이 0.2~0.6에서는 $k_t$ 값이 0.64~0.68로 거의 일정한 값을 유지하였지만 그 이상에서는 급격하게 감소하는 것을 확인할 수 있었다. 이상의 실험결과로부터 2-2형 압전복합재료는 초음파 트랜스듀서 재료로 응용 가능성을 확인 할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.214-219
• /
• 2000

In this paper the structural dielectric and piezoelectric properties of Pb［(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$］ $O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.728-732
• /
• 2011

In this study, piezoelectric and dielectric properties of Lead-free $0.97[(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3]+0.03[(Bi_{0.5}K_{0.5})TiO_3]$ (abbreviated as 0.97NKNS-0.03BKT)ceramics synthesized by conventional solid-state reaction process were investigated as a function of $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. The results indicated that the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition significantly improved the sinterability, grain growth and piezoelctric properties of 0.97NKNS-0.03BKT ceramics. The optimum values as planar piezoelectric coupling coefficient ($k_p$= 0.355), piezoelectric constant ($d_{33}$= 207 pC/N) and mechanical quality factor ($Q_m$= 128) were obtained when 0.009KCT was added. The electromechanical coupling factor($k_p$) was slightly decreased according to the increasing temperature.