• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.271-277
• /
• 2013

Purpose: The purpose was to study the corneal refractive power changes associated with the wearing of everted silicone hydrogel soft lenses. Methods: The corneal refractive power and corneal astigmatism were measured using corneal topographer (CT-1000, Shin-nippon Co., Japan) for checking change of corneal refractive power and objective refractive error was measured by auto-refractometer (Natural vision-K 5001, Shin-nippon Co., Japan). We measured at baseline and 1 week after lens wearing. Results: The correcting of corneal refractive power could be effective in low myopia. It's more effective to the higher power of greatest meridian of cornea and the more corneal astigmatism. 73% of subjects' refractive error was decrease less than 1 D and 17% of the subjects had an reverse effect (increase) occurs. The reduction of objective refractive error was more effective when cornea refractive power was great or corneal astigmatism was much. Conclusions: Pressure which the everted silicone hydrogel lens to the cornea could be caused. It occurred as the degrees of corneal power, corneal astigmatism and objective refractive error differences. Selection of an appropriate subject is important considering difficulty of changing the parameters of the lens.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2012

Objectives: Although chuna medicine has progressed distinguishingly, yet chuna medical terminology hasn't been standardized. So there are a lot of difficulties in translating chuna related book and their meaning cannot be conveyed properly. For this reason, we could say standardization of chuna medical terminology is very essential. Purpose of our study was to develope a standard database of concept terms for chuna medicine, in addition, we considered establishing fundamental principles of chuna medical terminology. Methods: To select standard chuna medical terms, we sorted important chuna medical index words. Then we sorted those words into a group that has same meanings and united to one single term. In the meantime, we extracted index words from 26 domestic and foreign manual technique related books and sorted them out and based on these word, we translated chuna medical terms to Korean terms. In the case of chuna technique terms, we searched chuna text books for term those were wrongly used, and corrected them by suggesting fundamental principles of terminology. Results: 664 chuna words were selected as standard chuna terms and have been translated to English terms. In the process, adscititious words such as anatomical terms and title of books were exempted and selected only important words that could be used as index of chuna terms. In deciding essential elements of chuna technique terms, patient position, contact point, segmental contact point, malposition, procedure method were selected. Conclusions: Correcting chuna medical terms in a sort period could cause confusion, but in long term perspective, in the aspect of conveying the meaning clearly and education purpose, standardizing of chuna medical terminology must be done. From this study, standardization of chuna medical terms were chosen in large category, but further studies must be followed in order to standardize terms of subdivisional categories.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.877-885
• /
• 2005

The Froude scaling between the prototype and the model was tried to estimate the necessary ventilation rate for non-isothermal concentrated fume from the semi-closed inner space. Based on the non-dimensional similitude equations derived from the Zukoski plume rise analysis, the scaling experiments were done to verify the relationship of the non-dimensional energy release rate and the non-dimensional mass flow rate by using two different scaled volume models, model A ($1\;m{\times}1\;m{\times}1\;m$) and model B ($0.5\;m{\times}0.5\;m{\times}0.5\;m$). The experimental results showed that the theoretical similitude between the models is acceptable for the prediction of ventilation rate of the concentrated fume. The maximum energy release rate used for the experiments was $20\;kW/m^3$. In the experimental range, the similitude between the energy release rate and the ventilation mass flow rate was well defined and the necessary ventilation rates were 20-30% higher than the stoichiometric ventilation mass flow rate. Based on results of current study, the design of the local air ventilation system can be improved by correcting the effects of buoyancy and diffusion of the non-isothermal concentrated fume.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.171-178
• /
• 2014

From now on, in order to meet more stringer diesel emission standard, diesel vehicle should be equipped with emission after-treatment devices as NOx reduction catalyst and particulate filters. Urea-SCR is being developed as the most efficient method of reducing NOx emissions in the after-treatment devices of diesel engines, and recent studies have begun to mount the urea-SCR device for diesel passenger cars and light duty vehicles. That is because their operational characteristics are quite different from heavy duty vehicles, urea solution injection should be changed with other conditions. Therefore, the number and diameter of the nozzle, injection directions, mounting positions in front of the catalytic converter are important design factors. In this study, major design parameters concerning urea solution injection in front of SCR are optimized by using a CFD analysis and Taguchi method. The computational prediction of internal flow and spray characteristics in front of SCR was carried out by using STAR-CCM+7.06 code that used to evaluate $NH_3$ uniformity index($NH_3$ UI). The design parameters are optimized by using the $L_{16}$ orthogonal array and small-the-better characteristics of the Taguchi method. As a result, the optimal values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance(ANOVA). The compared maximize $NH_3$ UI and activation time($NH_3$ UI 0.82) are numerically confirmed that the optimal model provides better conversion efficiency of $NH_3$. In addition, we propose a method to minimize wall-wetting around the urea injector in order to prevent injector blocks caused by solid urea loading. Consequently, the thickness reduction of fluid film in front of mixer is numerically confirmed through the mounting mixer and correcting injection direction by using the trial and error method.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.2
• /
• pp.62-67
• /
• 2011

Purpose: The authors evaluated the differences between K-wires and Cannulated screw, plate for fixing the proximal metatarsal chevron osteotomy of moderate and severe hallux valgus. Materials and Methods: There were 62 patients (79 feetz) who were moderate and severe degree hallux valgus according to the classification of Mann. They all got the proximal chevron osteotomy when correcting the deformity. We divided the patients into 4 groups, Two K-wire fixed group as A, one cannulated screw fixed group as B. Two cannulated screw fixed group as C, Plate fixed group as D, Group A were patients (26 feet) and Group B were patients z(9 feet), Group C were patients (31 feet) and Group D were patients (13 feet). Preoperative, postoperative and follow-up hallux valgus angle (HVA) and intermetatarsal angle (IMA) were measured for each patient. ANOVA test and Student t-test were done for statistical analysis. Results: Mean follow up period was 43.8 months (range: 12~82 months). Preoperative mean IMA was $16.4{\pm}3.5$, $17.7{\pm}11.3$, $17.3{\pm}5.9$ and $16.6{\pm}2.3$ degrees in respectively group A, B, C, D. Immediate postoperative mean IMA was $5.6{\pm}3.4$, $7.3{\pm}4.4$, $7.6{\pm}4.4$ and $6.7{\pm}2.8$ degrees in respectively group A, B, C, D. The final mean IMA was $8.9{\pm}4.5$, $15.2{\pm}7.5$, $10.3{\pm}4.4$ and D $7.7{\pm}3.5$ degrees in respectively group A, B, C, D. There were significant statistical increase in final mean IMA of group B and C (p<0.05). Conclusion: The IMA was significantly increased in the group which used one or two cannulated screw for fixation on follow up, therefore more caution should be needed when using one or two cannulated screw fixation technique after proximal chevron osteotomy.

• Journal of Veterinary Clinics
• /
• v.22 no.1
• /
• pp.21-25
• /
• 2005

This study was performed to assess therapeutic effect of the tibial plateau leveling osteotomy (TPLO) in dogs with experimentally transected cranial cruciate ligaments (CrCL). Nine healthy adult Beagle dogs were transected left CrCL under general anesthesia. The dogs were assigned to TPLO and non-TPLO control groups. The TPLO procedures for correcting the CrCL rupture in the left stifle of dogs were performed under sterile conditions. Before TPLO procedures, all dogs were screened by orthopedic and radiographic examinations. Dogs were lameness free for the previous three months, and when examined at the walk and trot on a hard surface, in a straight line and on a circle. Lateral and craniocaudal radiographs were done to confirm the soundness of the both knee joint in dogs and not detectable lesions were diagnosed. The dogs were intravenously injected with a 10 mci/kg of 99mTechnetium-methylene diphosphonate (99mTc-MDP) under general anesthesia. Scintigraphs were obtained using a large field of view gamma camera equipped a parallel-hole, low-energy about 3 hours after intravenous injection of 99mTc-MDP. Before CrCL transection and 4, 8, and 12 weeks after the procedures, scintigraphy were conducted. Bone uptake of the left stifle joint increased after the procedures in all dogs. When the bone uptake from the TPLO procedure was compared with that of the control, there was a significant difference (p < 0.05). At 12 weeks after the TPLO procedure, the dogs showed normal anatomical posture and gait. It is concluded that TPLO procedure was effective in reconstruct of the stifle joint in dogs with CrCL rupture.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.91-103
• /
• 2015

Purpose: The purpose of this study was to investigate the effects of home exercise program and exercise program of round shoulder adjustments on the level of trapezius muscle activity and attention capacity for middle school students. Method: The participants in this study were composed of 21 middle school students. We made the students lie on the floor in prone position, then measured the height of their acromion from the floor. We chose participants for our study whose measurement values were over 2.5cm. We divided them into two groups, one is for the experimental group, and the other is for the control group. The experimental group exercised three days a week for 6 weeks, including home training, and the control group didn't exercise. We used EMG to measure the trapezius muscle's activity and used a Stroop test for the measurement of the students' attention capacity. Results: The results of our study are as follows. There was no significant difference between the experimental group and the control group. However, there was a significant difference within the experimental group when comparing pre and post training results for Trapezius muscle activity and attention capacity. Conclusion: We found that correcting round shoulder symptom increases the Trapezius muscle activity and students' attention capacity. Future experiments should investigate with systemical management. Also, we need to increase the frequency of the exercise and participants.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.28 no.2
• /
• pp.118-122
• /
• 2017

Background and Objectives : In unilateral vocal fold paralysis (VFP), medialization thyroplasty (MT), arytenoid adduction (AA) and injection layrngoplasty (IL) are the most common procedures to correct phonatory problems. There is no consensus that which procedure is superior to the other for correcting the glottal insufficiency. The purpose of this study was to compare the phonatory parameters between MT, AA and AA with IL (AA+IL) in patients with unilateral VFP. Materials and Methods : This retrospective study enrolled patients from 2005 to 2016. Total 72 patients (49 male, 23 female, mean age 54.5 years) were classified into three groups ; MT (n=28), AA (n=12), and AA+IL (n=32). GRBAS scales, maximum phonation time (MPT), jitter, shimmer, noise to harmonic ratio (NHR), and voice handicap index (VHI)-10 and VHI-30 were preoperatively and postoperatively collected and compared between the three groups. Results : Age, gender and cause of VFP were not significantly different between the three groups. In MT and AA groups, MPT, VHI, G (overall grade) and B (breathiness) were significantly improved. In AA+IL group, jitter, shimmer, NHR, MPT, VHI, G and B were significantly improved. In analysis of differences (pre-postoperative values), ${\Delta}$ jitter (p<0.001), ${\Delta}$ shimmer (p=0.031), and ${\Delta}$ NHR (p=0.002) were significantly different and AA+IL group showed the greatest improvement. Conclusion : Analysis of voice parameters showed that all the three procedures for patients with unilateral VFP are effective in the improvement of voice ; especially in MPT, VHI-10, G and B scales. Compared to the others, AA+IL provided the better acoustic values including jitter, shimmer and NHR.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.313-321
• /
• 2004

Korean government has offcially decided to adopt global geodetic reference system(ITRF and GRS80) from 2007 keeping pace with the spread of GNSS. Industries related with LBS and telematics have called for use of the new coordinate system suitable for GIS/GPS applications. The government also defined the single plane coordinate system that covers entire korean peninsula as UTM-K considering DB-based framework data and user-friendliness, and its defects were corrected while being applied to the building of road framework data. The TM projection, and origin scale factor of plane coordinate system, 0.9996were employed in order to satisfy the single plane coordinate system for the entire Korean peninsula. For the origin of plane coordinate system, longitude of $127^{\circ}$30'00" and latitude of $38^{\circ}$00'00" were applied and, for the initial value of plane coordinate system, N=2,000.000m and E=1,000,000m were used. In addition to considerable savings in costs, it is expected that the UTM-K is applicable for correcting errors occurred during acquisition of geographic information and for aggregating map data produced by different sources. However, during the initial stage for introduction, confusion is forecasted due to the use of two different coordinate systems, which may be minimized by continued publicity and education.