• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1552-1554
• /
• 1998

TEC(Thermoelectric conversion) is direct conversion method between thermal energy and electric energy. We studied on the mechanical, electrical and thermal properties of thermoelectric module, made experimental thermoelectric generator with BiTe material and manufactured module tester for electric-thermal energy conversion.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.240-248
• /
• 2014

It is DC power that Output of renewable energy being recently developed and researched. Also, demand of DC power will expect to proliferate due to increase of digital load. Thus, DC distribution system providing high quality of power and reliability has emerged as a new distribution system. If the conventional distribution systems are substituted by proposed DC distribution system, the output of renewable energy can be connected with distribution systems under minimum power conversion. Therefore, in the event of connection with DC load, it can construct an efficient distribution system. In this paper, the integrated parallel operation of power conversion module for DC distribution system is proposed. Also, this paper proposed modularization of power conversion devices for DC distribution system and power control for parallel operation of large capacity system. DC distribution system consists of three power conversion modules such as AC/DC power conversion module 2 set, ESS module 1 set. DC distribution system controls suitable operation depending on the status of the DC power distribution system and load. Integrated operation of these systems is verified by simulation and experiment results.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.703-708
• /
• 2019

In this study, we investigate the relationship between the peeling behavior of the backsheet of a photovoltaic(PV) module and its surface temperature in order facilitate removal of the backsheet from the PV module. At low temperatures, the backsheet does not peel off whereas, at high temperatures, part of the backsheet remains on the surface of the PV module after the peeling process. The backsheet material remaining on the surface of the PV module is confirmed by X-ray diffraction(XRD) analysis to be poly-ethylene(PE). Differential scanning calorimetry(DSC) is also performed to investigate the interfacial characteristics of the layers of the PV module. In particular, DSC provides the melting temperature($T_m$) of laminated ethylene vinyl acetate(EVA) and of the backsheet on the PV module. It is found that the backsheet does not peel off below the $T_m$ of ethylene of EVA, while the PE layer of the backsheet remains on the surface of the PV module above the $T_m$ of the PE. Thus, the backsheet is best removed at a temperature between the $T_m$ of ethylene and that of PE layer.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.222-226
• /
• 2001

In this paper, 2.4GHz RF Module using Even Harmonic Mixer(EHM) was designed and fabricated for Direct conversion(DC) system. By minimizing performance degradation of DC system with DC offset and LO radiation, the capability of minimization and one chip solution in wireless system was proposed. The designed EHM using anti-parallel diode pair represented 9dB conversion loss and about -60dBm 2LO leakage radiation in RF port, and output reflection and reverse transmission characteristic of low noise amplifier was improved. So superior DC offset suppression characteristic is expected. RF Module which consists of EHM, LNA, RF amplifier, Frequency synthesizer and Duplexer was designed and fabricated.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.195-198
• /
• 2006

The technology of Solar Power conversion System is defined as a solar cell that changes the sol ar energy into the direct electric energy, power conversion and control technology that convert the dc power into ac power The solar cell module, power conversion, and a control part in component parts consisting a solar power conversion system have influence on its performance. The roles of power conversion and a control part supply the direct current generated by solar cell module for a load with high efficiency as conveniently as possible in this study, the power conversion systen that can generate solar power using DSC module was developed and its characteristics was experimented. The characteristics of the DSC power conversion system including MOSFET and DSP micro processor, high speed devices, was simulated using Psim. According to the results, converter and inverter was manufactured in detail and the performance characteristics were studied.

• 한국통신학회논문지
• /
• 제27권5C호
• /
• pp.522-529
• /
• 2002

GaAs pHEMT 기술로 V-band 수신단 각 MMIC 회로들을 설계 제작하였다. 또한 이를 집적하여 V-band downconverter module을 제작하였다. 제작된 downconverter는 24 dBm의 출력을 내는 LO 구동 전력 증폭기, 20dB의 소신호 이득을 가지는 저잡음증폭기, -1.6dBm의 출력을 내는 active parallel type의 발진기, 6 dB 이상의 변환이득 특성을 나타내는 cascode type의 혼합기로 구성되어 있다. 이처럼 혼합기의 우수한 변환이득 특성은 밀리미터파 대역에서 변환 이득 특성을 키우기 위해 반드시 필요한 거대한 IF buffer amplifier의 필요를 없애 주었다. 완성된 downconverter module의 측정결과 별도의 IF buffer amplifier없이 57.5 GHz와 61.7 GHz 사이에서 20 dB 이상의 높은 변환이득을 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.986-991
• /
• 2018

본 논문은 광대역 디지털 수신기의 동적 범위 개선을 위한 A/D 변환 모듈을 설계 및 제작하였다. 동적 범위 확장을 위한 A/D 변환 모듈은 입력신호 레벨에 따라 정상 경로와 증폭 경로로 신호를 분기하여 디지털 신호로 변환하는 방식이다. 제작 및 측정 결과, A/D 변환 모듈의 정상 경로는 입력 레벨 -57 dBm~-12 dBm 신호를 디지털 신호로 변환하고, 증폭 경로는 입력 레벨 -30 dBm~+12 dBm 신호를 왜곡 없이 디지털 신호로 변환하여 69 dB의 입력 동적 범위 특성을 나타내었다. 또한 순시 대역폭 100 MHz에서 일정한 출력 특성을 나타내고 있음을 확인하였다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.584-591
• /
• 2013

In this paper, a hybrid booster power module with Si IGBT and Silicon Carbide (SiC) Schottky Barrier Diode (SBDs) is presented. The switching characteristics of the hybrid booster module are compared with commercial Silicon IGBT/Si PIN diode based modules. We applied the booster power module into a non-isolated on board vehicle charger with a simple buck-booster topology. The performances of the on-vehicle charger are analyzed and measured with different power modules. The test data is measured in the same system, at the same points of operation, using the conventional Si and hybrid Si/SiC power modules. The measured power conversion efficiency of the proposed on-vehicle charger is 96.4 % with the SiC SBD based hybrid booster module. The conversion efficiency gain of 1.4 % is realizable by replacing the Si-based booster module with the Si IGBT/SiC SBD hybrid boost module in the 6.6 kW on-vehicle chargers.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.67-76
• /
• 1997

In radar signal processing, an A/D converter with sufficient dynamic range and high sampling speed is required to detect the weakest target signals in heavy clutter and ECM environments. As the sampling frequency increases, the amount of digital data transfered to the signal processing module is also increased. To overcome these massive data transfer burden, we need an A/D conversion module with an enough data transfer rate. In this paper, we proposed an implementation scheme of a new A/D conversio module that can be used in multi-mode 3-D phased array radar signal processing system, and evaluated the performance. The proposed A/D conversion module is implemented with a standard A/D converter and a 6U-standard VME bus.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3230-3232
• /
• 1999

In this paper describes the design and improvement of a hybrid module for dual slope A/D converter. Since the input voltage to be converted is very sensitive and small. A/D converter must have the temperature stability. low-drift, and the high-resolution the conversion. A dual slop A/D converter circuit which is controlled by microprocessoer has been developed to reduce the offset voltage and the drift characteristics of operation amplifiers, and to improve the A/D conversion speed. Also hybrid module has been adapted to obtain the to obtain the stable and accurate A/D conversion for low cost use. The evaluation of the designed hybrid module has been shown as having a good performance, which will give usefull application to the industrial measurements use.