• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.706-713
• /
• 2007

The jet structure issuing from a conventional convergent nozzle of variable expansion rate is compared with the result from the nozzle of a constant expansion rate using a normal type annular slit. In experiments, to investigate the jet characteristics between the two cases of jet, the mean velocity of nozzle exit is fixed to be 90m/s, the pressures along the jet axis and radial directions are measured by a scanning valve system moving with 3-axis auto-traverse unit, and the velocity distribution obtained by calculation from the measured static and total pressures is compared. Also to obtain the highly stable and convergence jets, it is turned out that the flow through a nozzle of constant expansion rate using the Coanda effect with an annular slit is the most preferable than that case through variable expansion rate nozzle. Furthermore, it is found that the pressure drop along the nozzle for the constant expansion rate nozzle is small relatively against to the case of variable expansion rate nozzle.

• Water for future
• /
• v.28 no.2
• /
• pp.125-136
• /
• 1995

The propose of this study is improve the uncertainty of parameter choice of tank model by the trials and errors method. The real time prediction of parameter by using the Kalman filter is practiced to get the effective prediction algorithm of low flow runoff. Even though the total discharge of runoff through the orifice of each tank should be similar to the observed discharge, the tank model which can show the various basin characteristic is influenced by the runoff circumstances. As a result of the real-time estimation of the tank model parameter by the state-space type of Kalman filter, the variation of runoff circumstances is static when the convergence of observed value and estimated value keeps the ficed high point. The parameter of tank model which is estimated by Kalman filter shows good result for low flow and reasonable adaptability where flow change abruptly. The Kalman filter method is proved to give better result than Automatic structure estimation method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.43-53
• /
• 2020

The effect of the relative location between pre-swirl nozzle and receiver hole on the performance of radial on-board injection type pre-swirl system was analyzed. In this study, tendency of the change of discharge coefficient and temperature drop efficiency were analyzed for 20 design points through the combination of 5 pre-swirl nozzle location and 4 receiver hole location. Discharge coefficient of system tended to be similar to the pressure ratio of the pre-swirl nozzle. System performance variation occurred as the flow structure in the cavity was affected by the surface, and the influence of the stationary surface is greater than that of the rotating surface. Discharge coefficient of system changed -1.39% to 1.25% and temperature drop efficiency changed -5.41% to 2.94% refer to reference design point.

• Journal of Arbitration Studies
• /
• v.31 no.1
• /
• pp.155-171
• /
• 2021

Recently, the e-business market has become a place of convergence where consumers and suppliers communicate with each other, and a new method of trading of funds has emerged in the process. Crowd-funding is one of the types of money transactions that have emerged in the online space, and its interest and trading volume have been growing rapidly recently. The platform in the online space using crowd-funding method operates in the form of online telecommunication sales, and it is in the form of producing and delivering products based on funds obtained from potential consumers by the operators involved in securing funds. However, if the participating business operators do not deliver the product or deliver the product other than the promoted product and avoid responsibility, the potential demander will not be compensated without mediation by the platform operating entity. In this study, despite the rapid growth in the market size of crowd-funding, consumers who participated in the funding are protected and able to resolve disputes in the event of a conflict amid growing complaints from potential consumers and side effects. The structure or method of crowd-funding is a new form of trading that has different features from conventional e-commerce. Therefore, the legal basis is not yet in place and the standards need to be laid out through various and sufficient discussions politically, legally, socially and culturally and economically. As the potential market and positive effects of crowd-funding around the world have been recognized, a role is required as an ecosystem for new financial transactions. And the potential market could be realized as a new industry if the right legal system and policy consultation were made.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.53-58
• /
• 2022

Since a general household fan has only one left/right turning stage, the rotation angle cannot be adjusted leading to cases whether the wind reaches to an unnecessary area or vice versa. In this paper, we propose a method to efficiently control the turning section to selectively send wind to a necessary space while reducing energy waste. The minimum rotation angle was obtained by experimentally measured the stationary wind direction angle of the fan, and the optimal number of turning stages was selected by appropriately dividing the space where the wind reaches. Through this, it was confirmed that if the fan has a minimum rotation angle of 45°, a turning section of 3 stages and its rotation angle is increased by twice the stationary wind direction angle at each stage, the wind is distributed efficiently. Therefore, it is considered that the selective turning stage control proposed in this paper can minimize energy waste without significant change of the fan structure.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.401-404
• /
• 2003

In this paper, $H_2$, $H_{\infty}$, and mixed $H_2/H_{\infty}$ FIR filters are newly proposed for discrete-time state space signal models. The proposed filters require linearity, unbiased property, FIR structure, and independence of the initial state information in addition to the performance criteria in both $H_2$ and $H_{\infty}$ sense. It is shown that $H_2$, $H_{\infty}$, and mixed $H_2/H_{\infty}$ FIR filter design problems can be converted into convex programming problems via linear matrix inequalities (LMIs) with a linear equality constraint. Simulation studies illustrat that the proposed FIR filter is more robust against uncertainties and has faster convergence than the conventional IIR filters. the conventional IIR filters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.41-48
• /
• 2022

This study is a study that designed in-building antennas with improved orientation to improve 5G quality in buildings as 5G is stabilized and more and more traffic is expected to occur in buildings. Instead of applying the forward arrangement of antenna elements, which is the Yagi antenna propagation orientation principle, the antenna design method of vertical arrangement applied to the base station antenna was proposed, and it was confirmed through experiments that antenna orientation increased. According to the experimental results, the directivity did not increase significantly within 10m of the separation distance from the antenna, but the directivity increased by about 3dB at the distance separated by more than 10m. Considering that the wireless environment in the building has various variables such as structure of internal structure, materials such as concrete and glass, closed space, and walls, it is expected that antenna with improved orientation can expand the scope of 5G quality improvement and maintain stable communication service in the building.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.155-161
• /
• 2023

In this paper, we present a WebRTC-based emergency video call system structure that builds a service system in a constant monitoring environment to increase the usability and stability of elevator emergency call devices. The proposed system provides a smooth call environment between the emergency call system in the elevator and maintenance managers in case of an emergency, performs rapid response processing to elevator emergency calls through monitoring of the target elevator, and handles any emergency calls that may occur in the physical space of the elevator. The purpose is to build an environment that can implement low-latency, real-time video call services of voice and video by overcoming the physical constraints required for video calls. To this end, we have established a service environment based on OpenAPI, which is currently used in various fields and its performance has been proven, and provides video calls and emergency situation dissemination through rapid messaging by providing low-latency call quality. The presented system structure will be able to provide a basis for expanding various functions and constructing a reliable service environment and intelligent model for the elevator system through combination with the elevator control panel and various devices.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.586-593
• /
• 2014

The CNUSAIL-1 project aims to develop and operate a 3U-sized cube satellite with solar sail mechanism. The primary mission is to successfully deploy the solar sail in a low earth orbit, and the secondary mission is to collect the scientific data for the effect of the solar sail deployment and operation on orbit maneuver and attitude change of the cube satellite. For this, the bus system will collect and transmit the dynamic data of the satellite and the visual images of the solar sail operation. This paper describes solar sail mission and conceptual design of CNUSAIL-1. The actuation/operation of the solar sail and the bus system are preliminarily designed in terms of attitude control system, communication system, electrical power system, command and data handling system, structure and thermal control system is designed.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.171-176
• /
• 2022

This paper examines the historical meaning and value of sound art curating as a key type of interdisciplinary and convergence art practice that has been unfolding since the mid-20th century. Accordingly, this paper summarizes the developmental process from the beginning of 'sound art' to the present, but examines the context of visual art in which the material 'sound' functioned in chronological order, and focuses on curating cases of major sound art exhibitions. The purpose of this study is to analyze the impact and contemporary significance of the provided aesthetic experience. To this end, the text is divided into three sections and developed. The first section recognizes that the late 19th century futurist and Dadaist sound poetry, followed by Marcel Duchamp's 1913 attempt to combine musical score with visual art, had a profound influence on the visual music of avant-garde composer John Cage. This explains why this background caused the emergence of exhibitions dealing with 'sound' as a new medium. The second section explains that in the 1970s, sound as an artistic medium played a role in reflecting the critical relationship with the exhibition space dominated by visuality. In the third section, we analyze the curatorial methodology that allows the audience to experience sound as if it were a visual object within the organization of the exhibition hall from the 1980s to the present. Through this process, this paper critically treats the historical practice of customizing the perceptual structure in the exhibition hall, and considers the meaningful methodology of sound art curating considering the role of sound full of vitality in the contemporary art scene.