• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.930-933
• /
• 1988

This paper demonstrates an AI application for representing operator's heuristic knowledges in implementing process control. AI controller constitutes servo and regulatory controller, respectively. The knowledge base for servo controller was designed to obtain the process output with respect to the desired set-point in short period. The regulatory controller was to provide smooth output near the set-point. The AI controllers was implemented in Turbo-PROLOG on IBM-PC. For the parallel processing, Turbo-C was linked to calculate the process output. The result shows that this AI controller can be well suited not only for minimum phase but also for non-minimum phase. This controller may be used as a back-up controller for rather extensive expert system.

• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.15-29
• /
• 1997

Many studies have been performed and applied successfully for the control of undersaturated intersections, but most of them have been ineffective or invalid in oversaturated conditions. There has been relatively limited research in traffic control for oversaturated environments, and most has been too theoretical to be applied in a real system. Therefore, a traffic simulation model specifically designed for oversaturated arterial networks was developed. Two control objectives of traffic signal timing in oversaturated conditions were taken into consideration. One was to maximize the throughput, or the number of vehicles processed during a given time period. The other was to prevent queue spillback or to minimize the occurrence of queue spillback if inevitable.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.105-110
• /
• 2008

This paper presents a control method to maintain stable mold level for unsteady bulging in high speed casting. The stabilizing mold level is an important factor to get high quality products. But, for various reasons, there are several disturbance factors which make mold level unstable. Bulging is one of disturbance factors and considered for the current stage of study. We design a disturbance observer to attenuate the effect of bulging which is periodic mold level disturbance. Since the period of bulging varies with the casting speed, the parameters of disturbance observer are changed by the casting speed. Simulation is illustrated to demonstrate stable performance of the proposed method in comparison with a previous method in a variable operating frequency.

• Korean Journal of Child Studies
• /
• v.21 no.4
• /
• pp.243-257
• /
• 2000

This empirical test of the efficacy of the literature-based reading instruction was conducted with 63(31 male and 32 female) 2nd grade elementary school children. Subjects in the experimental group had 40-45 minutes literature-based reading instruction twice weekly; those in the control group had only basic text reading. Procedures included a pilot study, pre-test, experimental period, and post-test. Research instruments included the Basic Learning Skill Test(Park et al., 1988), the Qualitative Reading Inventory(Leslie & Caldwell, 1990), and the Elementary Reading Attitude Survey(Mckenna & Kear, 1990). Data were graded and scored by each research question and then analyzed with a t-test of differences between the groups. The experimental group showed higher word recognition, text comprehension, and story grammar strategies than the control group. They also showed more improvement in each of these categories than the control group.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.167-174
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. Although high resolution optical encoders or resolvers are used to provide a precise position information, these sensors are expensive. Moreover, in the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. And the control algorithm to generate switching signals using a Simple digital logic is presented. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1088-1091
• /
• 2009

A boost converter with charge-recycling technique fabricated by $0.25{\mu}m$ CMOS BCD process can provide different supply voltages to drive series RGB LEDs in sequence for reducing the power consumption on the constant current generator. The proposed technique stores and restores extra energy to improve the efficiency, as well as enhances the reference tracking response. Experimental results show that the period of reference-tracking response can be improved. When the load current is 100mA, the periods of reference down-tracking and uptracking are smaller than $10{\mu}s$ and $20{\mu}s$, respectively. Experimental results demonstrate fast and efficient reference tracking performance is achieved.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.104-105
• /
• 2013

When actual IPMSM is driving, it is difficult to figure out the correct current during the current control period due to the operation speed limit of digital signal processing. Therefore, in order to control IPMSM for electric vehicle efficiently, we should design 2D Look-up Table to find out optimal current reference corresponding to speed and torque of IPMSM. This paper explains the design method of 2D Look-up Table for optimal current control of constant torque area and constant output area of IPMSM for electric vehicle. Finally, experimental results are presented to verify the reliability of 2D Look-up Table.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.527-533
• /
• 1998

An optimized PWM switching strategy for an induction motor voltage control is developed and demonstrated. Space vector modulation in voltage source inverter offers improved DC-bus utilization and reduced commutation losses, and has been therefor recognizedas the perfered PWM method, especially in the case of digital implementation. Three-phase invertor voltage control by space vector modulation consists of switching between the two active and one zero voltage vector by using the proposed optimal PWM algorithm. The prefered switching sequence is defined as a function of the modulation index and period of a carrier wave. The sequence is selected by suing the inverter switching losses and the current ripple as the criteria. For low and medium power application, the experimental results indicate that good dynamic response and reduced harmonic distortion can be achieved by increasing switching frequency.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.684-686
• /
• 2000

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia. and high efficiency. However position sensor is essential in SRM in order to synchronize the phase excitation to the rotor position. The position sensors increase the cost of drive system and tend to reduce system reliability. This paper investigates the speed control of sensorless SRM in which the phase current and change rate are utilized in position decision, and the period of dwell angle is variable by compensating the rotor angle for speed control. The proposed system consists of position decision. phase locked loop controller, switching angle controller and inverter. The performances in the proposed system are verified through the experiment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.33-39
• /
• 2011

H.264 decoders usually have pipeline architecture by a macroblock or a 4 ${\times}$ 4 sub-block. The period of the pipeline is usually fixed to guarantee the operation in the worst case which results in many idle cycles and higher data bandwidth. Adaptive pipeline architecture for H.264 decoders has been proposed for efficient decoding and lower the requirement of the bandwidth for the memory bus. However, it requires a controller for the adaptive priority control to utilize the advantage. We propose a smart bus arbiter that replaces the controller. It is introduced to adjust the priority adaptively the QoS (Quality of Service) control of the decoding process. The smart arbiter can be integrated the arbiter of bus systems and it works when certain conditions are met so that it does not affect the original functions of the arbiter. An H.264 decoder using the proposed architecture is designed and implemented to verify the operation using an FPGA.