• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.423-430
• /
• 2000

Future microcellular systems will require distributed network control. A packet-switched network is suitable for this requirement. The packet reservation multiple access(PRMA) is a Reservation-ALOHA like protocol for wireless terminals to transmit packet speech to a base station. It allows spatially distributed users in cellular systems to transmit packeted voice and data to a common base station using a shared channel. In the existing PRMA, the problem is that the voice packets may collide with the data packets due to simultaneous channel access. the problem may be a major performance degradation factor to a voice and data mixed system. We propose a new PRMA method that integrates voice and data traffic efficiently by resolving the collision problem between data and voice packets. The proposed PRMA method gives a performance improvement than the existing PRAMA method in terms of voice packet dropping probability and data delay characteristic. From analytic results, we can confirm that the proposed PRMA method show a performance improvement than the existing PRMA protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.763-766
• /
• 2009

The electrical curtain is an electronic product which is most suitable for the sphere of intelligent home network. It provides the basic feature of intelligent home network such as the followings; various functions, powerful control. It also becomes the ideal technology with inexpensive power-line protocol, energy saving and solar power generation. Generally it is a suitable motor for BLDC to move the electrical curtain, because it provides the maintenance without difficulty, long-lived use with good efficiency. On this paper, we proposed the BLDC motor controller desinged by CDM(Coefficient Diagram Method) and evaluated its performance with a simulation of the plant, designed the electrical curtain using BLDC motor and powe-line protocol.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.235-240
• /
• 2006

Stream Control Transmission Protocol (SCTP) provides the multi-homing feature, which allows each SCTP endpoint to use two or more IP addresses for data transmission. In this paper, the SCTP multi-homing feature is experimented and analyzed in terms of throughput over Linux platforms based on the NISTNET network emulator. We perform the experimental analysis of SCTP throughputs by SCTP multi-homing for the various network conditions: different packet loss rates, network bandwidths, and transmission delays. From the experimental results, it is shown that the SCTP multi-homing gives much better throughout gun over the SCTP single-homing case in the networks with a high packet loss rate. In the meantime, the other factors including network bandwidth and transmission delay do not seem to give a significant impact on the performance of the SCTP multi-homing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.916-922
• /
• 2007

Wireless networks (WNs) are developed and applied widely in a lot of areas. Now, a new generation of wireless networks is coming, and that is Wireless Mesh Network (WMN). At present, there are not so many researches which deal on this area. Most researches are derived from Mobile Ad hoc Networks (MANET) and WNs. In WMNs, there are some applications that require real-time delivery. To guarantee this, rate control and congestion control are needed. This problem leads to optimization issue in transport layer. In this paper, we propose a mathematical model which is applied in rate and congestion control in WNMs. From this model, we optimize rate and congestion control in WMNs by maximizing network utility. The proposed algorithm is implemented in distributed way both in links and sources.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.59-75
• /
• 2006

In this paper, we propose a congestion control scheme to control the congestion due to the mobility of ubiquitous devices on ubiquitous computing environment. Especially, this congestion control scheme provides a reverse congestion avoidance state which can classify between packet error by features of wireless network and packet dropping by congestion. Also, it provides a slow stop state which can minimize bandwidth waste due to congestion control. The proposed congestion control scheme controls more adaptive than existing congestion control schemes. The proposed congestion control scheme is designed based on DCCP(Datagram Congestion Control Protocol) being proposed by IETF(Internet Engineering Task Force) and implemented on the Linux kernel. In simulation results, the proposed congestion control scheme provides good bandwidth throughput in wireless network as well as in wired network.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.367-370
• /
• 2002

In this paper, we propose a new node architecture LonWorh control Network for home network system environmint using power line communications. Using conventional Lon Work technology is a many disputable points for home network. LonWork network system needs high-cost development equipment. Moreover, conventional Lon Work system can not implement high-grade algorithms and variety application operation. because of the limitation of processing ability in Neuron chip. For that reason, the proposed structure is applicable to low-cost and more complex applications which are impossible in home network using conventional Lonworks structure. The proposed structure is implemented with some hardware and かone software for power line home network. The physical layer and the MAC layer of the LonTalk protocol within ton Work are implemented in hardware, which decreases the development costs communication processor. The upper of link layer of the LonTalk protocol is implemented with software, which decreases the development costs of software and increases the flexibility of tile system and increases the extension of the system. We verified the commercial feasibility of the proposed system through the power line tests with the existing LonWorks network in home network. As a result, it is concluded that the proposed architecture provides increasing flexibility and decreasing cost of the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2691-2707
• /
• 2014

Medium access control is critical in wireless networks for efficient spectrum utilization. In this paper, we introduce a novel collision resolution method based on the technique of known interference cancellation, and propose a new MAC protocol named as CR-MAC, in which AP tries to decode all the collided data packets by combining partial retransmissions and known interference cancellation. As the collided transmissions are fully utilized, less retransmission is required, especially in a crowded network. The NS-2simulation and MATLAB numerical results show that, under various network settings, CR-MAC performs much better than the IEEE 802.11 DCF in terms of the aggregation throughput and the expected packet delay.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.209-211
• /
• 2005

This paper proposes a adaptive medium-access control(MAC) protocol designed for low-power wireless multi-hop sensor networks which is used for connecting physical world and cyber computing space. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining inactive for long time, but becoming suddenly active when specific event is detected. These characteristics of multi-hop sensor networks and applications motivate a MAC that is different from traditional wireless MACs about power conservation scheme, such as IEEE 802.11. Proposed MAC uses a few techniques to reduce energy consumption. Result show that proposed MAC obtains more energy savings.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.745-748
• /
• 1990

MMS (Manufacturing Message Specification) is a communications standard of MAP (Manufacturing Automation Protocol), which is a Network Protocol for Industrial Automation. In the environment of Mini-MAP, MMS is situated in the application layer and on the LLC (Logical Link Control) layer. In this paper, MMS software is implemented on the basis of ISO DIS 9506. The implemented software was tested with Token Passing Bus Network Interface Unit, which was designed in our laboratory and performs the actions of layer 1 and 2.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.105-107
• /
• 2006

As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.