• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.596-602
• /
• 2007

Recently, many ECUs(Electronic Control Units) have been used to enhance the vehicle safety, which leads to a distributed real-time control system. The distributed real-time control system requires to reduce the network delay for dependable real-time performance. There are two different paradigms by which a network protocol operates: event-triggered and time-triggered. This paper focuses on implementation of a time-triggered protocol. i.e. TTP/C(Time-Triggered Protocol/class C). This paper presents a design method of TTP control network and performance evaluation of distributed real-time control system using TTP protocol.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.180-188
• /
• 1997

This paper proposes a new efficient MAC(Media Access Control) protocol to establish the ultrasonic communication network for underwater vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. A MAC protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater systems is designed, and the proposed control protocol is implemented for its verification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.403-405
• /
• 2004

This paper describes an implementation of Home network Control Protocol(HnCP) and it's application to an Intelligent lighting system. The HnCP was announced by korea PLC forum in June 2003 to provide a network protocol for PLC based home appliances. The HnCP master and HnCP slaves were implemented using XPLC30 which is an SOC with ARM9 core. The efficacy of the developed HnCP network modules were shown by applying them to a intelligent lighting system composed of dimmable fluorescent lamps. An extended message set was proposed for the intelligent lighting system and we proposed some directions for the future development of HnCP.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.334-340
• /
• 2004

In this paper, a Web-based management system for the building network is described. A multi-protocol converter based on SoC and embedded Linux is designed. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-protocol converter integrates control network of RS-485 and LonWorks devices through TCP/IP protocol for a client with Java applet. The system consists of three-tier architecture, such as a client, a server that is performed on a multi-protocol converter, and control devices. The developed system includes the inverter motor control system with modbus protocol for the RS-485 network. The experiment results show that the multi-protocol converter using embedded Linux is a flexible and effective way to builda Web -based monitoring and control system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2001

Requirements for device networks differ greatly from those of data(business) networks. Consequently, any control network technology which uses a fieldbus protocol is, in general, different from IP network protocol TCP/IP. One needs to integrate fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. This paper suggests a basic concept that can be applied to distributed control over IP network or internet. Specifically, LonWorks technology that uses LonTalk protocol is reviewed as device network. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. It is also addressed that many hardwired PLCs can be replaced by LonWorks devices. Connecting these remote LonWorks networks to the Internet can provide a powerful, integrated, distributed control system.

• 정보통신설비학회논문지
• /
• 제1권1호
• /
• pp.26-39
• /
• 2002

This paper describes design and implementation of home network control protocol for networked home appliances. The proposed network protocol has four-layered protocol structure and device-modem interface structure for the flexibility of modems based on power line communication. The standard message set is specified to guarantee the interoperability between various home appliances The proposed protocol can be easily implemented because it has minimum network overhead.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1558-1562
• /
• 2005

This paper describes the design and implementation of a wireless home network system using Home Network Control Protocol (HNCP) called the wireless HNCP home network system. For wireless interfaces of HNCP, IEEE 802.11b and IEEE 802.15.4 standard protocols are considered. With the implementation of the wireless HNCP home network system, a simple analysis about coexistence between IEEE 802.11b and IEEE 802.15.4 is achieved. Through the implemented wireless HNCP home network system and the analytical results about the coexistence between both two different wireless protocols, the feasibility of the wireless HNCP home network system is shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.82.4-82
• /
• 2001

Requirements for device control networks differ greatly from those of data (business) networks. Consequently, any control network which uses a filedbus protocol is, in general, different from If network protocol TCP/IP. One then needs to integrate both fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. Connecting these remote Lon Works networks to the Internet can provide a powerful, integrated, distributed control system. This paper suggests a basic concept that be applied to distributed control over IP network or internet. Specially, Lonworks technology that used LonTalk protocol is reviewed as device network and ...

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.371-376
• /
• 2004

Distributed Network Protocol Version 3.0 (DNP3.0) is the communication protocol developed for the interoperability between a RTU and a central control station of SCADA in the power utility industry. In this paper DNP3.0 is implemented by using HDL with FPGA and C program on Hitachi H8/532 processor. DNP3.0 is implemented from physical layer to network layer in hardware level to reduce the computing load on a CPU. Finally, the ASIC for DNP3.0 has been manufactured from Hynix Semiconductor. The commercial feasibility of the hardware through the communication test with ASE2000 and DNP Master Simulator is performed. The developed protocol becomes one of IP, and can be used to implement SoC for the terminal device in SCADA systems. Also, the result can be applicable to various industrial controllers because it is implemented in HDL.