• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2014

Borehole investigation which is mainly used to figure out geotechnical characterizations at construction work has the benefit that it provides a clear and convincing geotechnical information. But it has limitations to get the overall information of the construction site because it is performed at point location. In contrast, geophysical measurements like seismic survey has the advantage that the geological stratum information of a large area can be characterized in a continuous cross-section but the result from geophysics survey has wide range of values and is not suitable to determine the geotechnical design values directly. Therefore it is essential to combine borehole data and geophysics data complementally. Accordingly, in this study, a three-dimensional spatial interpolation of the cross-sectional distribution of seismic refraction was performed using digitizing and geostatistical method (krigring). In the process, digital map were used to increase the trustworthiness of method. Using this map, errors of ground height which are broken out in measurement from boring investigation and geophysical measurements can be revised. After that, average seismic velocity are derived by comparing borehole data with geophysical speed distribution data of each soil layer. During this process, outlier analysis is adapted. On the basis of the average seismic velocity, integrated analysis techniques to determine the three-dimensional geological stratum information is established. Finally, this analysis system is applied to dam construction field.

• Journal of Korean Public Health Nursing
• /
• v.2 no.2
• /
• pp.62-80
• /
• 1988

The main purpose of this study was to find out the actual status of safety and heal th education activities in the manufacturing industries through survey of 136 plants in Seoul City and Gyunggi- Province Area which employ nurses being charged in the safety and health care services to the employees. A questionaire was mailed to the employees on the Mar. 2, 1987. Total 634 responds from 87 industries were collected by Apr. 20, 1987. Among the total, 618 responds from 80 industries were included in the analysis. The major findings obtainded from this study are summarized as follows; 1. Safety and health education activities in each industry: 1) The $67.6\%$ of safety directors surveyed were performing the education to the employees. And in case of medical directors, it was $18.8\%$ of them. 2) Periodically, annual safety' and health education programs were being drawn up in the $65.0\%$ of the industries (52 companies). And the $60.6\%$ of the planners were safety directors of safety staffs in charge. 3) It was only $27.5\%$ of the companies surveyed in which the safety and health education were performed more than an hour every month. In the $22.5\%$ of the companies, neither safety programs nor health education activities were performed. 4) In the $47.5\%$ of them, safety and health educations were performed in cooperation with related agencies such as health center. 2. The rate of employees participated in safety and health educations; 1) The received rates by subjects of the educations when labors were newly employed to their companies were as follows; education regarding danger and profer handling method of machinery and appliances: $64.2\%$, education regarding noxiousness and handling method of raw materials: $42.2\%$, etc. 2) The $63.6\%$ of the labors received educations on safety and health when they changed their work places. 3) The $74.8\%$ of the labors received specific safety and health educations. 4) The general safety and health educations were received by the $47.2\%$ of management and clerical personnel and $50.0\%$ of labors pre and post physical examination. 3. The main reasons of inactive performance of the educations were as follows; lack of knowledge and inexperience of the occupational safety and health staffs, lack of cooperations between themselves and low need of workers for safety and health education, etc. 4. The preferable subjects of educations for workers; (1) pre and post education of physical examination, (2) education regarding the prevention of accidents. (3) general health care, sex education and family planning, etc. As a result of this study, we can conclude that the safety and health education work in industries as the subject of this study is on the incipient stage. Appropriate measures are to be taken for the activation of safety and health education work such as; continuous public relations, financial and technical supports of the government, training of professional/occupational safety and health staffs, efforts of workers to receive the education and collaborations of the employers.

• Journal of East-West Nursing Research
• /
• v.10 no.1
• /
• pp.126-135
• /
• 2004

Purpose: This study is a descriptive investigation study to identify oriental nursing curricular data, situation, and cognition which are ongoing in our country's educational institutions. Method: Data were collected from a hundred and seventeen nursing institutions(sixty four of three-year course and fifty three of four-year course) after distributing fourteen questionnaires by mail and collecting them by phone and internet browsing from Mar. 2. 2003 to Nov. 11. 2003 to identify oriental nursing educational situation. Results: 1) Oriental related subjects included mostly oriental nursing, introduction of oriental nursing, and introduction of oriental medicine. The credits were mostly two credits for four-year course, however, there were similar number of three-year courses of schools opening with one credit(53.5%) and two credits(46.5%). 2) The educational purpose of oriental subject was for reasons of citizen's increasing concern to the oriental medicine, need of integration of east-west medicine, and method of own traditional treatment. 4) In the prospect of oriental nursing, opinion of needs of continuous education to develop the theory and practice was the most, and there was opinion of progress of oriental nursing in accordance with oriental medicine, while there was one of no need of education also. Conclusion: Accordingly, we suggest a development of a program for developmental oriental nursing education and practice such as professional oriental nursing course for nursing leaders and nurses. and need for aggressive studies on oriental nursing for paradigm shift. In addition, it is prospective that the development of oriental nursing theory and practice could be recognized as an internationally competitive one of our own nursing knowledge system in world nursing market.

• Spatial Information Research
• /
• v.21 no.4
• /
• pp.83-89
• /
• 2013

Recently various contents have been produced using the techniques that require high-performance computing process. A lot of services have been being producted as AR(Augmented Reality) service being combined with mobile information service that a moving user search various information based on one's location with. Mobile information service has a characteristic that it needs to get new information according to the location an user moves to. The characteristic requires a lot of communications when user search information moving to a different location. In order to make up for this drawback, we propose a prefetching technique based on speed and viewing angle in this paper. Existing prefetching techniques retrieve the following location of users considering moving speed and direction of the users. The data showed on the screen in AR is limited by the viewing angle of the mobile device. Due to the problems we discussed above, existing prefetching techniques have a demerit that they retrieve a lot more data than needed actually. We propose more efficient way of retrieving data with AR using the viewing angle of the mobile device. The method we propose reduces retrieval of unnecessary location using the users' speed, direction and viewing angle. This method is more efficient than the existing ways of retrieval because we don't need as many data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.75-87
• /
• 2013

This study developed a GIS-based suitability assessment model of coastal zoning system that is needed in the substantial classification of coastal zoning system according to the establishment of law about coastal zoning system. First, this study investigated several kinds of regulations, GIS database and application system related coastal area. Also, grid data model was selected as the GIS analytical model for calculating items of suitability assessment of coastal zoning system. And Grid-based analytical method was suggested for calculating items composing of sea and spatial location characteristics including physical one. Critical values of items were presented using standards that were suggested in coastal regulations and land suitability assessment. Especially, this study presented a calculation method of continuous pattern as fuzzy set function for reflecting the characteristics of GIS data. And this study classified the suitability grade using Z-score and developed model designating coastal zone as conservation management priority, utilization management priority, and planning management priority. This study is judged that very efficient business performance is possible if we consider the spatial coverage of study area and GIS database when the suitability assessment model of coastal zoning system that is suggested in this study, is applied to business works.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.50-57
• /
• 2013

This paper provides a design of high-throughput parallel turbo decoder that is able to decode several packets of various length simultaneously. For high-speed communications, designing of Turbo decoder as parallel structures reduces the long decoding time caused by iterative turbo decode way. Also, by employing the double buffer structure for input and output packets improves the decoder throughput by enabling continuous decoding. Because parallel turbo decoder is designed to be able to decode the packet of the longest length, there exist idle PE's(Processing Element) in the case of decoding packets of short length. The main idea of this paper is to increase the utilization of PE's in parallel Turbo decoder and to improve the decoder throughput by using the idle PE's immediately for the subsequent packets decoding. For this, the control is necessary to enable the concurrent decoding of several short packets and we propose the method of this control. Applying the proposed method, we implemented Turbo Decoder with 32 PE's that can decode packets of 6144 bits maximum. Compared to the conventional Turbo decoder, although the area was increased about 16%, the decoder throughput was improved 28 times for short packets.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.212-219
• /
• 2015

This study focuses evaluating the efficiency and performance evaluation of composite type sheet-membrane waterproofing method that utilizes a separation behavior inducement system designed to resolve the chronic problems of disintegration and damage of overlap areas of waterproofing layers. As the result of the test, the tensile strength value was at 13.8N/mm and elongation rate at 587% for the separation behavior inducement type specimen, and the compared specimens had 14.2N/mm for tensile strength and 335% for elongation rate. For the separation behavior adhesion method specimen, when tensile stress or displacement occurred, the Zero-Span tension occurrence did not follow, which resulted in that the bottom sheet layer and the top membrane layer did not simultaneously becoming damaged. When undergoing the top and bottom layers were separated through separation behavior due to lack of flexibility, the bottom layer began to damage at the primary stage, and with the allowed boundary the upper membrane layer began to display flexibility and showed continuous displaced resulting in secondary phase damaging.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.139-156
• /
• 1995

A set of field investigations was performed to estimate accurately the predominant periods of seismic 8round motions and the attenuation characteristics of the seismic ground vibration. Predominant periods of ground motions were estimated from the measurement of the continuous microseismic vibratins of certain periods, inherent in the ground and in the buildings, utilizing the high sensitivity digital velocity seismometer consisting of 3-component geophones and a digital seismograph. Estimated predominant periods of microseismic vibraion of the ground(measured on'the ground surface) and the building (measured on the second floor) were in the range of 0.18~0.235 sec. and 0.26~0.31 sec. respectively. The subsurface structure of the site ground was surveyed by the seismic refraction method utilizing the digital seismicwave probing system. The ground structure was found to be a two-layered system : an upper top soil layer of 7m in thickness with the P-wave velocity of 662m1sec and a lower layer of silty-clayey soils with the P -wave velocity of 2210m1 sec. The attenuation characteristics of the seismic ground vibrations were determined by the amplitude decay measurement method us;ng the Seisgun, which produces strong artificial seismic energy. Measured spatial attenuation coefficients of the ground vibration in vertical(Z) longitudinal(X), transverse(Y) direction were 0.1137, 0.0025, and 0.0290 respectively. Estimated Spartial QP's (inverse of the specific dissipation constant w.r.t. shear waved of X, Y, and Z directions were in the range of 5.913~7.575, 32.371~41.452, 2.794~3.579 re spectively. This indicates that aseimic design of the structures on the site should take stronger consideration regarding the earthquake resistance characteristics of the structures against longitudinal ground motion.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.232-241
• /
• 2003

Mountain Chungyeong, 879m in altitude, is located in the northeast of the middle area in Korea. Around Mt. Chungyeong, many Korean endemic and rare plants are populated, so it is considered a very important biogeographical area where the temperature zones of northern and southern plants are crossed. Because it is close to Seoul, a capital of Korea, it is a common mountain where many tourists visit frequently. Continuous tourist's visit may cause a bad influence on vegetation around the climbing paths. Therefor, weed community around the climbing paths on Mt. Chungyeong, where visitors exert a bad influence directly on its community by coming in and out, was surveyed phytosocialogically. Our surveys have been accomplished from August, 2001 to September, 2002. weed communities formed around the climbing paths on Mt. Chungyeong were divided into several patterns and analysed. They have been divided into 5 communities and 5 subcommunities. Community A: Plantago asiatica community, A-a: Erigeron annuus subcommunity, A-b: Carex. lanceolata subcommunity, B: Pseudostellaria palibiniana community, B-a: Carex siderosticta subcommunity, B-b: Galium trachyspermum subcommunity, C: Pueraria thunbergiana community, D: Lespedeza maximowiczii community, E: Rubus crataegifolius community, F: Oplismenus undulatifolius community, The flora surveyed in these communities was constituted of 47 families, 101 genera, 17 varieties, and 149 species. Wild plants such as Plantago asiatica, Erigeron annuus, Erigeron strigosus, Pueraria thunbergiana, Lespedeza maximowiezii, Rubus crataegifolius, Artemisia princeps var. orientalis, Artemisia japonica and Lysimachia clethroides were mostly light loving plants and higher resistant plants against the stamping pressure. Our result from the ranking all surveyed areas by the Bray-Curtis ordination method was very similar to the results from phytosocialogical table analysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.403-415
• /
• 2014

Recently, the temperature rise in the summer due to climate change, power usage is increasing rapidly. As a result, power generation facilities have been newly completed and the need for ultra-high-voltage transmission line for power transmission of electricity to the urban area has increased. The mechanized tunnelling method using a shield TBM have an advantage that it can minimize vibrations transmitted to the ground and ground subsidence as compared with the conventional tunnelling method. Despite the popularity of shield TBM for cable tunnel construction, study on the mechanical behavior of cable tunnel driven by shield TBM is insufficient. Thus, in this study, the effect of fractured zone ahead of tunnel face on the mechanical behavior of the shield TBM cable tunnel is investigated. In addition, it is intended to compare the behavior characteristics of the fractured zone with continuous model and applying the interface elements. Tunnelling with shield TBM is simulated using 3D FEM. According to the change of the direction and magnitude of the fractured zone, Sectional forces such as axial force, shear force and bending moment are monitored and vertical displacement at the ground surface is measured. Based on the stability analysis with the results obtained from the numerical analysis, it is possible to predict fractured zone ahead of the shield TBM and ensure the stability of the tunnel structure.