• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.613-619
• /
• 2017

Recently, the size of container ships has been progressively increasing, and much attention is required for safe navigation in shallow areas such as coastal waters and ports due to increases in draft. It is necessary to understand the characteristics of ship motion not only in still waters but also with waves. Especially in shallow regions, squat due to the vertical movement of the ship can be an important evaluation factor for the safe navigation, and wave drift force acting in the horizontal direction can have a great influence on the maneuverability of a ship. In this study, a numerical simulation using computational fluid dynamics has been performed for the wave exciting force acting in the vertical direction and the wave drift force acting in the horizontal direction for a very large container vessel sailing in shallow zone. As a result, it was found that total resistance in still waters greatly increased in shallow water. Wave drift force was shown to decrease given longer wavelengths regardless of water depth. It was observed that the wave exciting force in shallow water was considerably larger than at other water depths. As wave height against the central part of the ship lowered, the aft side rose.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.321-330
• /
• 2022

Busan New Port manages the largest volume of traffic among Korean ports, and accounts for 68.5% of the total volume of the Busan port. Due to this increase in volume, ultra large container ships call at Busan New Port. When the additional south container terminal as well as ongoing construction project of the west container terminal are completed, various encounters may occur at the Busan New Port entrance, which may cause collision risk.s Thus, the purpose of this study was to provide a plan to improve the safety of vessel traffic, in the in/out bound fairway of Busan New Port. For this purpose, the status of arrivals and departures of vessels in Busan New Port, was examined through maritime traffic flow analysis. Additionally, risk factors and safety measures were identified, by AHP analysis with ship operators of the study area. Also, based on the derived safety measures, scenarios were set using the Environmental Stress model (ES model), and the traffic risk level of each safety measure was identified through simulation. As a result, it is expected that setting the no entry area for one-way traffic would have a significant effect on mitigating risks at the Busan New Port entrance. This study can serve as a basis for preparing safety measures, to improve the navigation of vessels using Busan New Port. If safety measures are prepared in the future, it is necessary to verify the safety by using the traffic volume and flow changes according to the newly-opened berths.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.323-330
• /
• 2010

The time in port for vessels is one of the important factors for analyzing the operation status and the capacity of ports. In addition, the time in port for vessels can be directly used for estimating the greenhouse gas emissions resulted from vessels in port. However, it is unclear which variables can affect the time in port for vessels and what the marginal effect of each variable is. With these challenges in mind, the study analyzes the time in port for vessels arriving and departing port of Busan by using a parametric survival model. The results show that the log-logistic accelerated failure time model is appropriate to explain the time in port for 19,167 vessels arriving and departing port of Busan in 2008, in which the time in port is significantly affected by gross tonnage of vessels, service capacity of terminal, and vessel type. This study also shows that the greenhouse gas emission resulted from full-container vessels, which accounted for about 61% of all vessels with loading/unloading purpose arriving and departing port of Busan in 2008, is about "17 ton/vessel" in the boundary of port of Busan. However, the hotelling greenhouse gas emissions resulted from non-container vessels (3,774 vessels; 20%) are greater than those from the full-container vessels. Hence, it is necessary to take into account more efficient port management polices and technologies to reduce the service time of non-container vessels in port of Busan.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2008

The geotextile tube shall be sewen with geotextile longitudinally in the shape of hose and it shall be filled hydraulically through filling ports at the proper intervals to construct structure. Geotextile container shall be sewen after spreading of geotextile on the split barge and sealed shut after the filling soil, and then moved and positioned at the required position. And the geotextile container passes through the bottom of barge by opening split barge and drops to the seabed to form structure. This structure for the ${\bigcirc}{\bigcirc}$ project, UAE and we would propose that geotextile containment for core material of power plant breakwater to be constructed for lower bunds with containers up to -4.0m and do upper parts with the structures of tube up to 0.0m. For the application of proposed geotextile containment, review on stability of breakwaters and design consideration were adopted. The evaluation on stability of geotextile containment was classified by 3 items, internal design consideration for material selection, reviews on stability for individual and global structure. In this research, the geothermal analysis was performed to estimate the geothermal behavior of central breakwater. Central breakwater is located boundary of intake and outfall channel, it is mean that the central breakwater is thermal boundary of intake low temperature sea water and outfall high temperature sea water. Therefore, it is required to be designed a low permeability to ensure no mix of intake and outfall waters.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.143-156
• /
• 2020

In Southern Vietnam, the competition among Inland Clearance Depot (ICD) has resulted in deconcentration tendencies and shifting share situations. However, related research on Southern Vietnam ICDs in particular and ICDs in Vietnam in general has been extremely limited. Hence, In this study, empirical research is conducted on ICDs located in southern Vietnam from 2010 to 2017. The throughput volume data of ICDs is analyzed by concentration indicators, namely the concentration ratio (CR), the Herfindahl-Hirschman Index (HHI), the Gini coefficient, the Lorenz curve, and the shift share analysis (SSA). The results of adopting all the methodologies indicate that deconcentration was the mainstream trend for ICDs in Southern Vietnam during the period of 2010-2017. The findings provide insights into the process of container terminal development and have academic and managerial implications. The strengthening of the competitiveness of Vietnamese container ports and ICDs could affect the competing Southeast Asian neighbors by facilitating the port of more shipping companies.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.29-41
• /
• 2012

Competition between international Hub ports has been more and more intense. In order to invigorate itself, Gwang-Yang port has been making multilateral efforts. However, it has not still reached 300Millions TEU which is the standard to be permitted as a self-reliance Hub port. Therefore, a functional modification of berth should be considered. This study suggests to transform container berths to general berths. This article is focused on reserve berth mode of Gwang Yang hub port and selected three kinds of berths as alternative subjects of the study: general berth, exclusive berth, and multipurpose berth. This research has conducted that The subjects of the survey were in relation with Logistics as professional mutually group about Gwang-Yang hub port. The measurements of this survey were measure section and factor. Also, Fuzzy AHP(Analytic Hierarchy Process) was applied to the survey. According to the result, by measuring weight values of alternatives, the best favored one was multipurpose berth expect stability (32.6%), Exclusive berth was graded the most among the alternatives. Also, based on total weight value, the order of priority is as follows: multipurpose berth(38.2%), exclusive port(33.7%), general berth(28.1%).

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.95-111
• /
• 2012

The service quality survey for the customers of Gwangyang container port has been done since 2005. It has been difficult to compare annual levels or rival ports because the calculation of weights among service dimensions that is the most important procedure of the assessment systems did not be founded. In particular, the calculation results by the Analytical Hierarchy Process that specializes in estimating the weights were very unstable and not comparable because they were fluctuated annually more than 90% for the specific item. The objective of this study is to support the establishment for new assessment system of service quality with cost- and time-effective tools at Gwangyang port. The confirmatory factor analysis methodology applied to 2007-2009 survey data from the customers of Gwangyang port can estimate ex-post weights to measure annually the stable service quality. The proposed methodology allows us to build the assessment system of more scientific and accurate service quality while reducing the survey items. By this study, a port company can measure accurately the quality of service and improve its competitiveness through being compared to previous periods and leading companies.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.1-10
• /
• 2022

Looking at the cargo trend of Gwangyang port (GWP) during past decade, petrochemical items grew by 26% and steel item grew by 12%, but container cargo just grew by 4%. Thus, Yeosu-Gwangyang Port Authority (YGPA) sets the port development initiative targeting at industrial core port considering GWP's strength as multi function port and industrial port and GWP's weakness as lower container cargo growth trend. The purpose of this study is proposing the projects about the GWP's industrial core port development. The results of the study is as follows. As a prerequisite for development as an industrial core port, it was suggested to form a consensus on the modification or change of the port performance index of univariate port cargo volume. The following three tasks were presented for GWP to develop as an industrial core port. It can be said that it is most necessary to derive, manage, and monitor GWP industrial core performance indicators. Next, it is necessary to conduct a survey on the satisfaction of industrial support in ports. Finally, it is necessary to measure the added value of the port area of GWP hinterland.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.385-386
• /
• 2022

Currently, global developed countries in shipping and logistics establish smart ports by introducing various digital technologies such as automated terminals and sharing platforms. This means that the importance of efficiency throughout the port by improving resource utilization efficiency and minimizing work idle time is increasing. Therefore, this study proposes a yard truck dispatching method of improving resource utilization efficiency. And we analyze the problems of the existing dispatching rules and develop Y/T dispatching algorithm that comprehensively considers related constraints. In addition, the simulation takes into account the terminal congestion based on the operation data of the Busan New Port, it is conducted using the existing dispatch method and developed Y/T dispatching algorithm. And the operational effects of analysis result are evaluated.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.117-128
• /
• 2021

In order for the users (shipping firms and shippers) and suppliers (stevedoring firms) in the container terminal industry to win-win, it is necessary to have some appropriate diverse market conditions for the industry. This study analyses the basic conditions and demand and supply characteristics of the industry and investigates the market performance of Busan container ports. First, this article analyses the basic characteristics of demand and supply. As the demand characteristics, there are five ones such as 1) exogeneity of demand, 2) function as export/import transportation and hub for transshipment, 3) increase of users' bargaining power, 4) high substituting elasticity, 5) reduction of volume growth. As the supply characteristics, there are seven ones such as 1) inelasticity of supply, 2) homogeneity of stevedoring services, 3) over-supply, 4) adoption of cutting-edge stevedoring technology, 5) scale economy and impossibility of storage, 6) labor market rigidity, 7) enhancing port's role in SCM. In addition, this study conducts the so-called structure-conduct-performance analysis. For the structure analysis, 1) lacks of scale economy in stevedoring companies, 2) high entry barrier, 3) strengthening of shipping firms' bargaining power, 4) transitory permission scheme for tariff are analyzed. For the conduct analysis, 1) price discrimination between export/import and transshipment, 2) mid-term length of terminal use contract, 3) continuous investment in equipment, 4) low level of cooperation among terminal operating firms are derived. For the performance analysis, 1) inequality in profitability, 2) reduction of export/import cost, 3) delay in adopting cutting-edge technology, 4) idle equipment are analyzed. Following this logical flow, the hypothesis that the market structure influences the market conduct is tested based on the actual dataset. As a future agenda in the conclusion, this article recommends the so-called port industrial policy.