• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.167-173
• /
• 2004

Recently, it has been reported that frictional behavior at nanometer scale can be different from that at macro scale. In this article, friction and wear tests were conducted using an AFM to investigate the effect of real contact area on the coefficient of friction and wear property. SiO$_2$, Hica, and SiGe were used in friction test and the AFM tip was Si$_3$N$_4$. The real contact area between an AFM tip and flat surface was calculated by the Johnson-Kendall-Roberts (JKR) theory. Wear specimen was Mica, and the diamond tip was used. We found that the coefficient of friction is constant below a critical area, but it is degraded over the area. Moreover, it is found that wear depth increased rapidly from a certain load and was degraded as a function of the number of the scanning cycles. Also, the range of scanning velocity used in this study had little effect on the wear depth.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.840-846
• /
• 1991

In case of the rapid thermal process by halogen lamps, an optical pyrometer is generally used to measure the temperature. It is, however, necessary to measure the temperature by the thermocouple when the process temperature is lower than 700$^{\circ}C$ and the correction of the temperature is required. Contact by the PdAg paste is commonly used out but in this case it is impossible to see the effect of surface states of the substrate, which is critical in the rapid thermal process. In this study, real temperature ramping speed of silicon substrates coveredwith various thin films such as SiO$_2$2, Si$_{3}N_{4}$, dopants, and conductive layers (Ti or Co) was investigated by a mechanical contact of the thermocouple. And the results were compared with the case in which the contact was made by the PdAg paste. Effect of process ambient was also studied. It was found that depending on the surface state, overshoot more than 100$^{\circ}C$ could occur. It was also found that in case of the substrate covered with conductive layers, mechanical contact might render the correct temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.382.1-382.1
• /
• 2014

Graphene field-effect transistors (GFET) is one of candidates for future high speed electronic devices since graphene has unique electronic properties such as high Fermi velocity (vf=10^6 m/s) and carrier mobility ($15,000cm^2/V{\cdot}s$) [1]. Although the contact property between graphene and metals is a crucial element to design high performance electronic devices, it has not been clearly identified. Therefore, we need to understand characteristics of graphene/metal contact in the GFET. Recently, it is theoretically known that graphene on metal can be doped by presence of interface dipole layer induced by charge transfer [2]. It notes that doping type of graphene under metal is determined by difference of work function between graphene and metal. In this study, we present the GFET fabricated by contact metals having high work function (Pt, Ni) for p-doping and low work function (Ta, Cr) for n-doping. The results show that asymmetric conductance depends on work function of metal because the interfacial dipole is locally formed between metal electrodes and graphene. It induces p-n-p or n-p-n junction in the channel of the GFET when gate bias is applied. In addition, we confirm that charge transfer regions are differently affected by gate electric field along gate length.

• Herbal Formula Science
• /
• v.13 no.2
• /
• pp.59-69
• /
• 2005

Samyoyongantang (SMY), a herbal medicine, has been used as cure for gangrene. To evaluate anti-inflammatory effect of samyoyongantang, we treated samyoyongantang extract in animal model system induced contact hypersensitivity. Contact hypersensitivity, a local inflammatory response of the skin, was induced by 1% DNCB on the right ear of BALB/c mouse. Samyoyongantang was prepared as water extract and administrated everyday for 2 weeks per oral. A right ear of mouse was potently swelled by 1% of DNCB treatm ent, but a mouse ear thickness was significantly reduced by samyoyongantang after 2 we eks treatment. Samyoyongantang reduced IgG in serum obtained from blood of 1 % DNCB-treated mouse. IgE in serum was not changed by samyoyongantang treatment. From these results, anti-inflammatory effect of samyoyongantang, especially reduction of ear swell ing, might be partly due to reduction of IgG in serum.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.289-296
• /
• 2012

Atomic force microscopy (AFM) has been used for imaging surfaces and measuring surface forces at the nano-scale. Force calibration is important for the quantitative measurement of forces at the nano-scale using AFM. Normal force calibration is relatively straightforward, whereas the lateral force calibration is more complicated since the lateral stiffness of the cantilever is often comparable to the contact stiffness. In this work, the lateral force calibrations of the rectangular cantilever were performed using torsional Sader's method, thermal noise method, and wedge calibration method. The lateral optical lever sensitivity for the thermal noise method was determined from the friction loop under various normal forces as well. Experimental results showed that the discrepancies among the results of the different methods were as large as 30% due to the effect of the contact stiffness on the lateral force calibration of the cantilever used in this work. After correction for the effect of contact stiffness, all the calibration results agreed with each other, within experimental uncertainties.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.35-38
• /
• 2012

In this study, we have attempted to characterize the photovoltaic effect in real-time measurement of photoinduced current in a poly-Si-based solar cell using photoconductive atomic force microscopy (PC-AFM). However, the high contact resistance that originates from the metal-semiconductor Schottky contact disturbs the current flow and makes it difficult to measure the photoinduced current. To solve this problem, a thin metallic film has been coated on the surface of the device, which successfully decreases the contact resistance. In the PC-AFM analysis, we used a metal-coated conducting cantilever tip as the top electrode of the solar cell and light from a halogen lamp was irradiated on the PC-AFM scanning region. As the light intensity becomes stronger, the current value increases up to $200{\mu}A$ at 80 W, as more electrons and hole carriers are generated because of the photovoltaic effect. The ratio of the conducting area at different conditions was calculated, and it showed a behavior similar to that generated by a photoinduced current. On analyzing the PC-AFM measurement results, we have verified the correlation between the light intensity and photoinduced current of the poly-Si-based solar cell in nanometer scale.

• Structural Engineering and Mechanics
• /
• v.15 no.3
• /
• pp.331-344
• /
• 2003

The plane contact problem for two infinite elastic layers whose elastic constants and heights are different is considered. The layers lying on a Winkler foundation are acted upon by symmetrical distributed loads whose lengths are 2a applied to the upper layer and uniform vertical body forces due to the effect of gravity in the layers. It is assumed that the contact between two elastic layers is frictionless and that only compressive normal tractions can be transmitted through the interface. The contact along the interface will be continuous if the value of the load factor, ${\lambda}$, is less than a critical value. However, interface separation takes place if it exceeds this critical value. First, the problem of continuous contact is solved and the value of the critical load factor, ${\lambda}_{cr}$, is determined. Then, the discontinuous contact problem is formulated in terms of a singular integral equation. Numerical solutions for contact stress distribution, the size of the separation areas, critical load factor and separation distance, and vertical displacement in the separation zone are given for various dimensionless quantities and distributed loads.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.849-855
• /
• 2008

An experimental method based on contact resonance is developed to extract the contact parameters of mechanical joints under various clamped conditions. Mechanical joint parameters of shear contact stiffness and damping were extracted for different physical joint parameters such as surface finish of the mating surfaces, the presence of lubrication, the effect of the clamping pressure, and shear load. It was found that the shear contact stiffness values decreased with increasing clamping load and increased with increasing shear loading. Contact damping ratio values were almost constant with clamping load, but decreased with increasing shear load. Moreover, rough surfaces exhibited the highest shear stiffness and contact damping compared to smooth surfaces.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.6
• /
• pp.41-49
• /
• 2016

To evaluate lubrication properties by surface roughness under boundary and mixed lubrication, a new approach is suggested by both asperity flow and contact with stochastic characteristics. Many researchers already have studied the effect of surface roughness on flow. But, it has become important to research of the phenomenon of asperities contact in surfaces because the growth of asperities contact area under heavy load conditions. In this paper, flow factors in the average flow model derived by Patir and Cheng were used, and a multi-asperity contact model was included to calculate lubrication properties of a surface with a randomly generated rough surface. A numerical analysis using the average Reynolds equation with both the average flow model and the asperity contact model was conducted, and the results were compared with those from previous research. The results showed that the influence of asperities on lubrication and the friction coefficient changed rapidly on application of contact model.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.87-99
• /
• 2016

The purpose of this study was to investigate the appearance orientation and clothing and cosmetics purchasing behaviors according to media contact responses. The subjects were 445 female university students in Daejeon and Chungnam province. The measuring instruments was a questionnaire with media contact responses, appearance orientation, clothing and cosmetics purchasing behavior, and subjects' demographic characteristics. The data were analyzed by Cronbach's ${\alpha}$, frequency analysis, ${\chi}^2$ test, ANOVA, Duncan's multiple range test, and regression analysis using SPSS program. The results were as follows. First, female university students had very positive response and attitude on entertainers' appearance, style and products showed by media. Second, media contact response had a significant effect on appearance orientation. The group with a high level of media contact response showed higher appearance orientation than the groups with mediate and low level of media contact response. Third, media contact response had meaningful effects on clothing and cosmetics purchasing behaviors. The group with a high level of media contact response showed higher shopping frequency, purchasing frequency, and more spending on clothing and cosmetics than other groups.