• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.102-109
• /
• 2016

This paper presents mechanical properties and chloride diffusivity of the recycled aggregate concretes(RAC) in which natural coarse aggregate was replaced by recycled coarse aggregate(RCA) by compressive strength levels(20, 35, 50 MPa). A total of 9 RAC were produced and classified into three series, each of which included three mixes designed with three compressive strength levels of 20 MPa, 35 MPa and 50 MPa and three RCA replacement ratios of 0, 50 and 100%. Engineering properties of RAC were tested for slump test, air content, compressive strength, chloride penetration depth and chloride diffusion coefficient. The test results indicated that the workability of RAC could be improved or same by RCA replacement ratios, when compared with that containing no RCA. This is probably because of the RCA shape improving the workability of RAC. Also, the test results showed that the compressive strength was decreased by 9~10% as the RCA replacement ratios increase. Furthermore, the result indicated that the measured chloride diffusion coefficient increases by 144% with the increase of the RCA replacement. In the case of the concrete having low level compressive strength, the increase of chloride diffusion coefficient tends to be higher when using the RCA. However, the trend of chloride diffusion coefficient in high level compressive strength concrete is similar to that obtained in general concrete. This is because that the effect of the RCA replacement could be a decrease with increase of compressive strength. Therefore, an advance on the admixture application and mix ratio control are required to improve the chloride resistivity when using the recycled aggregate in large scale.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.85-91
• /
• 2015

As the interest in hydrogen energy is being increased, it is a widely issue to develop a lot of hydrogen technologies in the field of production, storage, transportation, application and others. In the aftermath, there is a hydrogen town in Ul San, which is expected to expand application fields of hydrogen energy, as a demonstration project. The hydrogen town in Ul San can consist of high and low pressure part by the gas pressure. The high pressure part is managed by 'the high pressure gas safety control act'. And, low pressure part is managed by 'the guideline for the safety management of demonstration project of hydrogen town'. In this paper, to improve efficiency of safety management, the direction of safety management is reviewed by an analysis of low pressure hydrogen facility and safety management items. And then, some improvement directions are suggested. In the end, it is expected that the results of this study could help to activate construction of hydrogen town and improve efficiency of safety management as well.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.133-142
• /
• 2009

This research is performed to estimate quality of trial pavement for construction and analyze effect of fatigue life by using the pay factor. Specially, asphalt content which is difficult to control the pavement quality, is selected by pay adjustment standard factors and pay factor is calculated by asphalt content. This research is also analyzed to present relation of fatigue life according to asphalt content, to evaluate quality of the road pavement by calculating pay factor of sampling trial field mixture 2 times. This research confirms that it is different quality of road pavement according to pay factor changes. To analyze the fatigue life of pavement by using asphalt mixture for trial field. As a result, it is conformed that high pay factor could be high fatigue life of trial field. This means that pay factor using probability theory reflects road pavement fatigue life. Also, this study is included that beam fatigue test manufacturing specimen such as mixing type of plant which purvey asphalt mixture to trial field, compared with fatigue life of trial field. As a result, the fatigue life of specimen that is manufactured by mix type is higher than trial field specimen. This means that performance of road pavement can be reduced by gradation or other effects. Therefore, to exactly evaluate the quality of road pavement, pay factor should be calculated appling various pay adjustment standard factors such as gradation, air-void in U.S. states which is adopted pay adjustment.

• Journal of Photoscience
• /
• v.11 no.3
• /
• pp.115-120
• /
• 2004

For the expression study of antioxidant isoenzyme genes in rice (Oryza sativa L.) plants, extensive searches for genes of superoxide dismutase (SOD), ascorbate peroxidase (APX), and catalase (CAT) isoforms were performed through the GenBank database. The genes for two cytosolic and one plastidic CuZn-SOD, one Fe-SOD, two Mn-SOD, two cytosolic and two chloroplastic (stromal and thylakoid) APX, and three CAT isoforms were available in japonica-type rice. These isoforms were named as cCuZn-SOD1, cCuZn-SOD2, pCuZn-SOD, Fe-SOD, Mn-SOD1, Mn-SOD2, cAPXa, cAPXb, Chl_sAPX, Chl_tAPX, CATa, CATb, and CATc, respectively. Since they shared a high degree of homology in the nucleotide and amino acid sequences, the gene-specific primers for the genes were designed directly from their full-length cDNAs found in the database except for the CATa gene. These primers were used in the RT-PCR analysis to investigate the differential expression of antioxidant isoenzyme genes in rice plants from the seeds irradiated with low doses (2, 4, 8, and 16 Gy) of gamma-radiation. The gammairradiation slightly increased the transcripts of pCuZn-SOD, while those of Fe-SOD, cAPXb, and CATb decreased. However, no substantial differences were observed in the expression of all the isoenzyme genes between the control and irradiated groups. In this study, gene specific primers for thirteen SOD, APX and CAT isoenzymes were constructed from the full-length cDNAs. The results of RT-PCR analysis obtained by using these primers suggests that the expression levels of SOD, APX, and CAT isoenzyme genes in rice seedlings were hardly affected by gamma-irradiation at the seed stage.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.456-460
• /
• 2012

This study was carried out as a survey on the level of lead (Pb), cadmium (Cd), arsenic (As) and mercury (Hg) in 5 items of agricultural products (lettuce, pumpkin, head lettuce, cabbage and crown daisy) for which safety guidelines are not yet established in Korea. The 407 samples were collected from local markets in 9 regional places and the levels of metals were measured by ICP-MS and mercury analyzer. The average levels of Pb, Cd, As and Hg were 0.026, 0.018, 0.008 and 0.003 mg/kg for lettuce, 0.002, 0.001, 0.001 and 0.0006 mg/kg for pumpkin, 0.002, 0.005, 0.001 and 0.0005 mg/kg for head lettuce, 0.001, 0.002, 0.0002 and 0.0006 mg/kg for cabbage and 0.022, 0.014, 0.006 and 0.004 mg/kg for crown daisy. For risk assessment, the daily dietary exposures of Pb, Cd and Hg by intake of these agricultural products were calculated and compared with PTWI (provisional tolerable weekly intake) established by JECFA. The daily dietary exposure of heavy metals by intake of these agricultural products were 0.13, 0.56 and 0.09% of PTWI, respectively. These monitoring results will be utilized as fundamental data for the establishment of Korean standards of Pb, Cd, As and Hg in 5 items of agricultural products and valuable source for DB construction for science-based safety control of heavy metals in foods including agricultural products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3597-3609
• /
• 2012

Purpose: This study was done to develop the multidimensional scale of addictive behavior for adolescents. Methods: The process involved construction of a conceptual framework, initial items, verification of content validity, selection of secondary items, and extraction of final items. The participants were 636 adolescents in six middle schools and four high schools. Results: Seventy items were selected for the final scale, and categorized 8 factors explaining 56.5% of total variance. The factors were labeled as game addictive behavior, shopping addictive behavior, mobile phone addictive behavior, nicotine addictive behavior, television addictive behavior, gambling addictive behavior, alcohol addictive behavior, and internet addictive behavior. The scores for the scale were significantly correlated with addictive personality and self-control. Cronbach's alpha coefficient for the 70 items was .94. Scale scores identified adolescents as addictive behavior group, risk group, and average group. Conclusion: The above findings indicate that the multidimensional scale of addictive behavior for adolescents has good validity and reliability when used with adolescents. More importantly, it provides the first step toward developing a addiction prevention program. Additionally the scales provide an education or guideline, and proper physical and mental health management of youth in research and practice for the promotion of education.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.54-59
• /
• 1998

As distributed control systems (DCS) and plant information systems (PIS) are introduced into gas industries, process monitoring systems based on process data have attracted significant interests. However, these technologies have not been fully due to strong nonlinearities of batch processes. The multiway principal component analysis, which has been recently developed, has solved these problems and has been widely used in the industries. However, the lack of statistical background of process operators has been one of major obstacles for maximum utilization of the technology This paper introduces a real time monitoring system for batch gas manufacturing processes that offers a variety of tools that operators can understand and use without serious difficulties. The proposed integrated system covers the whole spectrum of monitoring and diagnosis that include data collection, monitoring and diagnosis. The developed system has been verified to be very effective for monitoring and diagnosis using its application to the construction of monitoring system for a typical industrial batch reactor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.95-102
• /
• 2012

In this paper, we propose a method that can construct efficiently a P2P overlay multicast network composed of many heterogeneous peers in communication bandwidth, processing power and a storage size by selecting a peer in a distributed fashion using an ant-colony theory that is one of the computational intelligence methods. The proposed method considers not only the capacity of a peer but also the number of children peers supported by the peer and the hop distance between a multicast source and the peer when selecting a parent peer of a newly joining node. Thus, an P2P multicast overlay network is constructed efficiently in that the distances between a multicast source and peers are maintained small. In addition, the proposed method works in a distributed fashion in that peers use their local information to find a parent node. Thus, compared to a centralized method where a centralized server maintains and controls the overlay construction process, the proposed method scales well. Through simulations, we show that, by making a few high capacity peers support a lot of low capacity peers, the proposed method can maintain the size of overlay network small even there are a few thousands of peers in the network.

• Ecology and Resilient Infrastructure
• /
• v.6 no.3
• /
• pp.163-170
• /
• 2019

The civil engineering materials used to stabilize the slopes of new riverbanks have a great impact on the types and growth of vegetation introduced after the completion of construction procedure. Recently, microbial-derived, ${\beta}$-glucan- and xanthan gum-based biopolymers are attracting attention as an ecofriendly strengthening material of riverbanks that can possibly stimulate plant growth. This study aimed to assess ecological effects of biopolymer application on native plants in Korean riverbanks. In particular, since dominant plant species could shape characteristics of an ecosystem, we examined the effects of biopolymer on the dominant plant species in riverbanks. Overall, biopolymer did not affect seed germination rates of testing plant species. In contrast, plants grew more vigorously in the soil mixed with biopolymer compared to those in the control soil. The biomass of Echinochloa crus-galli especially increased around two times more in the biopolymer treatment. Plants produced heavier root biomass and leaves with larger specific leaf area, which possibly contributes to the tolerance of environmental stress like drought. These results suggest that biopolymers treated on river banks are expected to stimulate plant growth and increase stress tolerance of domestic dominant plant species.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.745-756
• /
• 2022

The road tunnel is a semi-closed space that is blocked on all sides except the entrance and exit, and in the event of a fire, the smoke of the fire spreads longitudinally due to heat buoyancy caused by the fire and air currents that always exist in the tunnel. To solve this problem, smoke removal facilities are installed in road tunnels to secure a safe evacuation environment by controlling the direction of movement of smoke or directly smoking at fire points. In urban areas, the service level of urban roads decreases due to the increase in traffic due to the increase in population, and as a solution, the construction of underground roads in urban areas is increasing. When a fire occurs during hydrogen leakage through TPRD of a hydrogen fuel cell vehicle (FCEV), the fire intensity depends on the amount of leakage, and the maximum fire intensity depends on the orifice diameter of the TPRD. Considering the TPRD orifice diameter of 1.8 mm, this study analyzed the diffusion distance of fire smoke according to the wind speed of the roadway and the opening interval of the large exhaust port when the maximum fire intensity was 15 MW. As a result, it was analyzed that air flow in the tunnel could be controlled if the wind speed of the road in the tunnel was less than 1.25 m/s, and smoke could be controlled within 200 m from the fire if the damper interval was 50 m and 100 m.