• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.537-546
• /
• 2020

Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.1-9
• /
• 2010

연약지반 개량을 위한 수평배수공법으로 샌드매트 공법이 활발하게 사용이 되고 있다. 그러나 현재 압밀침하를 촉진시키는 재료로써 샌드매트에 관련하여 문제점들이 발생하고 있다. 무엇보다도, 샌드매트공법에 요구되는 모래의 양이 증가함에 따라 공급이 원활하게 이루어지고 있지 않은 상태이다. 또한, 수많은 건설현장에서 모래 및 골재의 무분별한 채취로 인하여 생태환경의 파괴 및 천연적인 자연경관의 손상을 초래하고 있다. 따라서 본 연구에서는 이러한 문제점을 해결하고자 샌드매트 대체제로서 풍쇄 슬래그의 사용이 적합한지를 판단하기 위하여 기본 물성시험, 실내 통수능 시험, 침하특성 분석과 현장모형을 실험을 통한 통수능과 침하특성, 프로그램을 통한 침하특성을 통해서 확인하고자 한다.

• 한국중재학회지:중재연구
• /
• 제12권2호
• /
• pp.373-418
• /
• 2003

This is to study intellectual property(IP) protection of contents which is related with transactions upon internet network. Issues of electronic transaction and infringement cases were studied and analyzed for intellectual property protection. Upon those study, utilization and activation of contents, dispute settlement and method of IP protection were suggested. To achieve this study purpose, it consists of 5 chapters. In chapter 1 introduction, it's mentioned purpose, scope, and method of this study. In chapter 2, outline of contents and e-Commerce, and subject of IP protection upon internet were studied. In chapter 3, issues and dispute factors of IP were discussed and infringement cases were analyzed. It found out that infringements would be variety and complex due to technology rapidly changes. In chapter 4, IP protection plan and responsibility of webmaster were studied and emphasized to protect IP upon Internet. Also, protection against infringement and method of dispute resolution were studied and suggested the method. In this study, the protection plan was suggested because IP protection of contents in internet would be many cases upon internet technology. It found out that technology was important for business expansion of contents, e-Commerce and IP protection, and to enact a law related with IP. In chapter 5 conclusion, this study was summarized and further research was suggested. This study results are 1. IP related laws had better enact or revise to meet internet technology changes for IP protection timely, 2. local laws are to change and develop to harmony with international norm and trends, 3. consolidation of IP related laws for unification of IP statement should be incurred to avoid unnecessary energy of legislation and not to create dispute matters. That's also for customer satisfaction. In conclusion, not to incur ADR and for IP protection of contents, IP related laws would be promptly made or revised, according to technology change trends and for international harmony, That's for internet related industry development and customer satisfaction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.481-489
• /
• 2006

Two dimensional diffusion model test was conducted to investigate the sedimentation properties and consolidation process of reclaimed ground using dredging coarse soil which is composed of passing amount 20 percentage and 45 percentage of #200 sieve size respectively. The passing amount of #200 sieve size affected on sedimentation properties. The coarse soil which is passing amount of 20 percent showed that the sedimentation structure was layered type and passing amount of 45 percentage was wall-partition type according diffusion distance. Furthermore, the water content of surface and section, and distribution of fine soil were changed according to diffusion distance. and the change amount of pore water pressure and strength property when soil is diffused, segregated and accumulated can be applied efficiently in design of dredging and reclamation.

• 한국지반환경공학회 논문집
• /
• 제11권5호
• /
• pp.45-51
• /
• 2010

본 연구에서는 생석회 말뚝에 의한 연약지반 안정처리공법으로써의 현장 적용성을 평가하기 위하여 한국산 생석회에 대한 공학적 특성 규명은 물론 지중에서의 생석회에 의한 지반개량 원리 및 주변지반의 개량특성에 대한 이론적 고찰과 함께 실내모형시험을 수행하여 이를 바탕으로 실제 현장에서의 적용성과 활용성을 평가하고자 하였다. 실험결과 생석회 말뚝 공법은 생석회의 소화 흡수에 의한 탈수효과, 말뚝의 팽창에 의한 압밀효과 및 말뚝 자체의 강도에 의한 지지력 증가, 침하감소 효과 등의 개량효과를 얻을 수 있는 것으로 평가되었다. 생석회는 재료 특성이 매우 양호하여 그 자체로써 상당한 강도를 가지고 있으나 보다 큰 강도가 요구될 시에는 시멘트 등을 첨가하면 효과가 있을 것으로 판단된다.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.124-137
• /
• 2012

This study aims to identify the meaning and formation cause of a style, and the essential elements of style formation, through psychobiological research as well as an analysis of the designs of Iris Van Herpen, a fashion designer, who in just 6 years has developed into a world-renowned new designer. As a result, it has been found that the psychobiological causes to form a style stem from the action of 'long-term memory', which is consolidated by 'selective attention', 'perceptional subjectivity', the principle of the 'neuron's connection specificity and invariance', and the principle of a 'neuronal signal's unilateral flow'. With such action, Herpen could develop her own original composition techniques. The formative shapes created by such composition techniques are characterized by enumeration, superposition, and hanging. The study has also found that the essential elements for a designer to be able to form his/her own style include 'aesthetic originality' in which the designer views the property of a thing from his/her inherent perspective, and finds the uniqueness from the thing that only he/she can express, 'technical differences' that are creative and original, and 'formative specificity' that is summarized into one property through an impressive shape.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.35-44
• /
• 1991

This study was carried out for the purpose of pre-estimating long-term settlement under condition of actual field soil's property, in case of building up industrial sites on the marine deposit silty clay located at West Coast in Korea. This study analyzed Hyperbolic Method, Square Root Time Method and Exponential Function Method with utilization of measured survey values of settlement in In-Cheon Namdong Industrial Sites. In the future, for the continuos utilization, it seemed to be needed that further the survey values of fields should be accurartely measured for the analysis of more accurate pre-estimate about long-term settlement. Among the prediction methods of settlement Hyperbolic Method seemed to be the best fitting method for measured data. The settlement equations were derived from above three methods, for long-term settlements.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.32-37
• /
• 2007

Using spark plasma sintering process (SPS), Ti-6Al-4V alloy powders were successfully consolidated without any contamination happened due to reaction between the alloy powders and graphite mold. Variation of microstructure and mechanical properties were investigated as a function of SPS temperature and time. Compared with hot isostatic pressing (HIP), the sintering time and temperature could be lowered to be 10 min. and $900^{\circ}C$, respectively. At the SPS condition, UTS and elongation were about 890 MPa and 24%, respectively. Considering the density of 98.5% and elongation of 24%, further improving the tensile strength would obtain by increasing the SPS pressure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.320-325
• /
• 2009

The constrained modulus, representative property to evaluate compressibility of soil, is needed to estimate the settlement of ground structure. A series of lab and field cone penetration tests for clayey soil of Busan new-port and Noksan industrial area were conducted to evaluate the estimation method of constrained modulus. Since CPT generates large deformation of ground, it is difficult to correlate the cone resistance with the constrained modulus. Therefore, appropriate correlation between them is essential to estimate the constrained modulus based on CPT results. The test results show that the ratio of the constrained modulus to the cone resistance is inversely proportional with plasticity index. Based on this result, the estimation method of constrained modulus for Busan clay is suggested.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

Ni(Fe)Al powders containing a homogeneous distribution of the in-situ formed AIN and $Al_2O_3$ dispersoids have been produced by mechanical alloying process in a controlled atmosphere using high energy attrition mill. The powders have been successfully consolidated by hot extrusion process. The phase information investigated by TEM and XRD analysis reveals that Fe can be soluble up to 20% to the NiAl phase ($\beta$) at room temperature after MA process. Subsequent thermomechanical treatment under specific condition has been tried to induce secondary recrystallization (SRx) to improve high temperature properties, however, the clear evidence of SRx was not obtained in this material. Mechanical properties in term of strength at room temperature as well as at high temperatures have been improved by the addition pf AIN, and the room temperature ductility has been shown to be improved after heat treatment, presumably due to the precipitation of second phase of $\alpha$ in this material.