• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.389-399
• /
• 2018

A perforated shear connector group is commonly used to transfer shear in steel-concrete composite structures when the traditional shear stud connection is not strong enough. The multi-hole perforated shear connector demonstrates a more complicated behavior than the single connector. The internal force distribution in a specific multi-hole perforated shear connector group has not been thoroughly studied. This study focuses on the load-carrying capacity and shear force distribution of multi-hole perforated shear connectors in steel-concrete composite structures. ANSYS is used to develop a three-dimensional finite element model to simulate the behavior of multi-hole perforated connectors. Material and geometric nonlinearities are considered in the model to identify the failure modes, ultimate strength, and load-slip behavior of the connection. A three-layer model is introduced and a closed-form solution for the shear force distribution is developed to facilitate design calculations. The shear force distribution curve of the multi-hole shear connector is catenary, and the efficiency coefficient must be considered in different limit states.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.462-467
• /
• 2007

From the research which it sees verification of the whole interpretation and local interpretation of the durability steel deck bridge a static test and it produces the test body which it sells with character and it executes smallness pul lek detailed interpretation it leads and the appropriate characteristic of smallness pul lek detailed interpretation and to sleep a nominal stress price and it compares it judges it does. The stress quality from each structure region which it follows in load stock location it analyzes and from the hazard which evaluates, the objective region the length rib and the bottom grater weld zone, the length rib and width rib connection department and the width rib with the father it divided. It investigated the stress distribution of the test body from these objective location, FEM interpretation it led and the conduct against each structure state tax it analyzed. General conduct the load stock location the floor plate is located in the center with interpretation price together symmetry characteristic to seem, it cannot be like that it cannot there is one actual test price. Like this reason the length rib and width rib connection actually production even production characteristic security it is a day when it is impossible with the curvature junction department which it blows, it follows in examination body deferment condition and form feed with the fact that it is visible a big difference even with error of some it becomes. Consequently for a data and the research which are more accurate it is judged with the fact that the effort which is prudent will be necessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.281-284
• /
• 2007

Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules ($>300cm^2$), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% ($Area=305cm^2$, Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, $SHG-YVO_4$ (${\lambda}=0.532{\mu}m$) and YAG (${\lambda}=1.064{\mu}m$). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.133-140
• /
• 2008

This study is purposed to understand the usage of the color and the material pattern in detail and to apply for interior architecture. Many documents have prescribed the color and the pattern at random. While the usage of the color and the materials was ignored rather than architectural form, the importance of the color and the materials stands out in modern interior space. The villa, the weekend home of the Savoye family, was built between 1928 and 1931. Particularly, the villa Savoye was focused for this study. Le Corbusier viewed case pieces for storage and wall partition for division as architecture, and he units furniture and architecture by developing partition that could be painted either the wall color to become part of the wall or in contrasting colors to stand out as wall partition. He loved white and lie believed in using it for interiors, but noted that it should also be balanced with a wall related polychromy. Color became an integral part of white structure of the villa savoye that was raised on stilt with an exterior wall at the base painted green as a visual connection with the lawn. Color was used architecturally in the interior as well, with white walls interrupted by planes of pink, blue and red ocher and it gives the space an unexpected playfulness with tile color of the finishing materials. the various usage of the color and material patterns constitute an element of great architectural richness. They have a unique principle based on emotional order and make the man move to another space and experience the spacial connection.

• Journal of Internet Computing and Services
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2017

There are two kinds of wireless network access to a certain place by using smart devices - 1) open (anonymous) - access and 2) user-authorized access. The open-access is a non-authorization connection method which does not need to require Smart device's user authorized information. It means open-access use only user's SSID (Service Set Identifier) information to access the wireless AP devices following public wireless network standard. This access mechanism is not suitable to use all of public wireless networks because users have to get all wireless network information around them. As a result, huge data for smart devices should be one of the most critical overload problems for them. Secondly, the user-authorized access method uses wireless network information (SSID and password) chosen by the users. So, the users have to remember and use the network access information data manually whenever accessing the network. Like open-access, this access method also has the operational and inconvenient problem for the users - manually inputting access information whenever connecting to the network. To overcome this problem in both schemes, we propose two improved wireless network access methods: 1) the implementation of automatic AP connection mechanism using user-authorization and iBeacon messages, and 2) SSID registration form for public wireless networks.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.17-32
• /
• 2001

The Rosette-joining system is a completely new press-joining method for cold-formed steel structures. One Rosette-joint has a shear capacity equal to that of approximately four screws or rivets. The Rosette thin-walled steel truss system presents a new fully integrated prefabricated alternative to light-weight roof truss structures. The trusses are built up on special industrial production lines from modified top hat sections used as top and bottom chords and channel sections used as webs which are joined together with the Rosette press-joining technique to form a completed structure easy to transport and install. A single web section is used when sufficient but can be strengthened by double-nesting two separate sections or by using two lateral profiles where greater compressive axial forces are met. An individual joint in the truss can be strengthened by introducing a hollow bolt into the joint hole. The bolt gives the connection capacity a boost of approximately 20%. A series of laboratory tests have been carried out in order to verify the Rosette truss system in practice. In addition to compression tests on individual sections of different lengths, tests have also been done on small structural assemblies and on actual full-scale trusses of a span of 10 metres. Design calculations have been performed on selected roof truss geometries based on the test results, FE-analysis and on the Eurocode 3 and U.S.(AISI) design codes.

• Korean Institute of Interior Design Journal
• /
• v.15 no.4 s.57
• /
• pp.106-114
• /
• 2006

The purposes of natural science museums are to educate the general public on the principles and application of science, and help them understand various aspects of science technology. Data should be analyzed by considering these educational aspects of exhibition, and the methods of presenting exhibits should be decided. Accordingly, the composition of exhibition contents with various exhibition elements has an important role at natural science museums. The relation and structure of exhibition themes are significant factors in helping visitors understand the principles of science and a system of viewing circulation can be used as an important tool for understanding the flow of exhibition. In other words, at the planning stage for the composition of exhibition contents, the relation of exhibition themes as well as the circulation patterns of viewers can induce active viewing behaviors. Therefore, centering on the patterns of viewing circulation as well as on the connectivity of exhibition themes at natural science museums, the purposes of this research are: 1) to conceptualize the composition of exhibition contents; and 2) to find elements that can induce active viewing behaviors by analyzing visitors' viewing behaviors. This research was establishing an analytical indicator of contact for viewing behaviors observed from the composition of exhibition scenarios, the active viewing patterns of engagement, first contact, and repeated contact were analyzed. First, a composition pattern with a high participation rate, in contact with exhibits, was found to induce an overall-viewing circulation and have a big ring of the composition of exhibition themes. Second, by inducing a partial-viewing circulation pattern, a high rate of first contacts was observed from a ring pattern of theme connection. Even for the structure with theme connection with depth, a high frequency of contacts with various exhibits was found when exhibition themes have a ring pattern. Third, the repeated contacts were mostly found in the form of scenarios, which has a successive structure of ring and cross patterns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.389-400
• /
• 2007

Statement of problem. Use of the conventional dental impression procedure is problematic in patients who have difficulty opening their mouth, difficulty breathing through their nose or tendency to gag. Purpose. It is necessary to make individual trays more comfortable for patients during impression taking procedure. It was reported at the KAP Annual Meeting 2001 Seoul that an improved impression technique was suitable for this purpose. In this study, the accuracy of the improved dental impression method for implant was compared with the conventional dental impression method. Material and methods. An oral simulator was made from clear acrylic resin block which had similar form of edentulous ridge. For setting up the standard, five fixtures were installed on it. Study casts were made using two kinds of impression techniques. One was the conventional method that was taken using silicone impression material and an individual resin tray under connection of inter-fixture relation. The other was the improved method in which was the connection of the impression coping and the thermoformed polymethyl methacrylate tray. In addition, two different study casts were made from the improved impression body. The coordinates of the fixture on the study model were measured by three-dimensional coordinate measuring equipment. Then the distances between each fixture were calculated and compared with that of oral simulator. Accuracy of the each impression method was also assessed. Results. The differences of inter-fixture dimension between study casts and simulator in the improved impression technique showed $0.014{\pm}0.016mm$ and $0.017{\pm}0.022mm$, respectively and that of the conventional method was $0.017{\pm}0.014mm$. There was no significant difference between the improved impression technique and conventional method. Conclusion. The improved impression technique is useful for multiple support implants.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.205-212
• /
• 2006

The premise of this study is that an ultimate objective in planning an exhibition space is spectators' experiences shaped by a result of their first-hand experiences and responses within an exhibition space, and this result can be recognized in the spectators' movement. Thus, the sign system that can directly affects viewers' main line of flow and movement patterns was examined vis--vis a mutually complementary relation in a triangular composition with the structure of exhibition space and the exhibition contents. Based on the findings, predictive values before and after a complementary application of the sign system to the structure of exhibition space was analyzed and its validity was assessed. The results of this research analysis were drawn as follows. It was shown that an understanding of the locations of direction signs and the degree of recognition can function as an important factor to predict viewers' movement, along with an understanding of topological characteristics of an exhibition space. In terms of the connection and disconnection of space units that form the space structure, it suggests that the distribution of signs and the degree of recognition can adjust the degree of connection and disconnection. Even though exhibition spaces for research subjects were selected from a relatively large number of museums, but the research was limited with a focus on the structure of exhibition space and sign systems. Thus, it is proposed that future studies should be conducted by including varieties of exhibition and environmental factors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.6
• /
• pp.37-49
• /
• 2002

The objective of this research was an investigation of the important green spaces in Daegu and to present the basic frame of green network in Daegu. Present the condition of the significant green spaces is as follows: In the 3km radius of the city center, the isolation and discontinuation of the green spaces was extensive, caused by crowding of houses and funeral parlours. Consequently, the isolation relaxation which leads to the additional creation of the green spaces and a buffering plan were demanded. In the transfer area of a 3∼6km radius, which is located between the city center's congested area and the suburb green spaces, the significant green spaces had high connection and buffering characteristic, but in the northwest and the south, serious discontinuation appeared between the suburb green spaces and the city conte green spaces. In the 6∼9km radius, the suburb important green spaces accomplished the function which extended the back core green spaces to the city center area. But creation of buffering green spaces was necessary in part because of proximity to the resident area. The results suggest a connection between green spaces on the base of the distribution of the important green spaces, were as follows: In the 3km radius, irregular direction lines appeared while a schedule one direction line appeared in 3∼6km and 6∼9km radius. The discontinued parts of the green network were caused by industrial complexes, house crowding, and cultivation areas. Consequently, reservation and creation plans of green spaces in response to this were demanded. Through the additional creation of green spaces in the discontinued parts, the basic frame of green network in Daegu was the radiation annular form. And it was suitable to activate the parks and the general green spaces.