• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.165-174
• /
• 2013

Portland cement concrete exposed to high temperatures during mixing, transporting, casting, finishing, and curing can develop undesirable characteristics. Applicable requirements for such the hot weather concrete differ from country to country and government agencies. The current study is an attempt at evaluating the hardened properties of the concrete exposed to hot weather in fresh state. First of all, this study reviews the current state of understanding and practice for hot weather concrete placement in US and then roadway sites with suspected hot weather concrete problems were investigated. Core samples were obtained from the field locations and were analyzed by standard resonance frequency analysis and the boil test. Based on the results, there does not appear to be systematic evidence of frequent cracking problems related to high temperature placement. Thus, the suspicious deteriorations which are referable to hot weather concreting would be due to other factors.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.87-90
• /
• 2006

This study investigates the temperature history of slab mock-up specimens for hot weather concreting applying various surface insulating methods, in order to improve concrete quality at hot weather condition. Test showed that the use of insulating blanket or a bubble sheet on upper section of slab prevented from abrupt increase of temperature and vaporization of moisture during early curing at hot weather circumstance. In addition, it secured higher strength at early age. Therefore it is concluded that concrete construction insulating with the bubble sheet will reduce the plastic and drying shrinkage as well as improve strength at early age, thus securing concrete duality.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.11-12
• /
• 2012

This study investigates the temperature rise of reinforcement bars located in the middle of the form (for reinforcement concrete) during hot weather condition. The temperature was measured for three consecutive days before placing concrete. Test results showed that the temperature started to increase at 7:00 AM before sun rised, and peaked at around 2:00 PM. It was found that the thinner the diameter of a reinforcement bar, the higher is the speed of temperature rise and drop of the bar. The peak level of temperature for D13, D19, D25 and D32 was 54.4℃, 55.2℃, 56.4℃ and 60.2℃, respectively.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.251-257
• /
• 2018

여름철 콘크리트는 수분증발에 의한 소성 및 건조수축균열, 슬럼프 저하, 콜드조인트 발생 등 다양한 문제가 발생한다. 이에 국내에서는 수분증발을 방지하고, 단열성능을 확보하기 위해 표면피복 양생을 위한 다양한 형태의 버블시트를 제작하여 사용하고 있으나, 여름철에는 적용사례가 없었다. 따라서 본 연구에서는 여름철 시공중인 아파트 현장에 1중의 투명, 백색 및 알루미늄 증착 버블시트와 PE필름 및 표면노출의 5가지 표면피복 양생재를 적용하여 콘크리트의 온도 및 균열특성 등 품질에 미치는 영향을 분석하였다. 실험결과 알루미늄 증착 버블시트가 온도저감, 균열저감 면에서 가장 뛰어난 것으로 나타났지만, 알루미늄 재질의 특성상 빛이 반사되어 시공자의 눈부심에 따른 시각공해가 발생하기 때문에 백색 버블시트의 사용이 가장 효과적인 것으로 밝혀졌다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.173-174
• /
• 2017

Although the application period of hot weather concrete in our country is two months of July~August which is relatively short, many problems in various aspects such as generation of plastic/dry contraction cracks and cold joints can be caused unless proper quality control measures are established at this time. Therefore, this study compared the temperature history of the placed concrete by applying a mono white and aluminum-deposited bubble sheet developed with surface coating curing materials for surface exposure and summer to an actually constructed apartment slab. The analysis result showed that the mono white bubble sheet is the best method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.19-22
• /
• 2003

The purpose of this study is to analyze the curing effect of planar surface heater for concreting in cold weather. Some experiments were conducted to evaluate the temperature history of concrete structures cured with heating sheets. Results are as follows ; (1) The temperature of concrete showed continuously rising trend with the heating by planar surface heater under the cold environmental condition of 3~-12$^{\circ}C$. And after about 24 hours the maximum temperature of concrete was reached at 25~3$0^{\circ}C$. (2) The temperature of slab concrete heated by planar surface heater of 130W/$m^2$ was at least $25^{\circ}C$ higher than that of an exterior air, and the curing performance was much more effective than heating by hot wind machine. (3) Through the curing by planar surface heater for 48 hours, the concrete maturity of about 1.5 times to heating by hot wind machine was acquired.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.17-18
• /
• 2016

On apartment construction sites in hot weather environments, the high temperature of 30℃ and above and radiation from the sun cause iron and mold temperatures to rise, which lowers worker efficiency and has a negative effect on the deposited concrete. Therefore this study measured the temperature of D10 ~ D16 iron and aluminum items actually used on box frame apartment construction sites currently under construction, in order to give reference information to solve hot weather concrete problems. The temperature measurement results showed that for iron, temperatures rose to around 45℃, and for mold around 58.8℃, calling for safety measures for workers in case of possible burning and other problems.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.59-66
• /
• 2015

본 연구는 슬럼프 감소, 연행 공기 부족, 건조수축 균열, 강도감소 등 굳지 않은 콘크리트와 굳은 콘크리트의 성질에 대한 타설시 고온의 악영향에 대한 원인분석을 실시하고 이를 경감시키기 위한 감수제, 공기연행제, 지연제 등의 화학적 혼화제와 플라이 애쉬, 고로 슬래그 등의 무기질 혼화재의 다양한 적용이 검토되었다. 즉, 서중 콘크리트의 품질향상을 위한 다양한 콘크리트 배합이 설계되고 각 배합에서의 굳지 않은 콘크리트 및 굳은 콘크리트 에 대한 영향이 분석되고 몇 가지의 최적 배합이 도출되었다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.688-696
• /
• 2016

본 연구에서는 하절기 서중 온도조건이 80MPa 고강도콘크리트의 특성에 미치는 영향을 검토한 것으로 외기온도조건 $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$에서 슬럼프플로, 충전성, 응결시간, 수화열 및 압축강도 발현 등의 특성을 평가하였다. 실험결과 온도 조건별 고강도콘크리트의 슬럼프 플로와 500mm도달 속도 및 경시변화는 외기온도 $20^{\circ}C$기준으로 온도가 $10^{\circ}C$ 상승시마다 외기온도 상승의 영향으로 급격한 슬럼프로스발생 시점을 약 30분 정도 앞당기는 것으로 나타났다. 응결시간은 외기온도 $20^{\circ}C$의 경우 초결 7시간, 종결 12시간으로 나타났으며, $30^{\circ}C$에서는 초결 1시간, 종결 3시간, $40^{\circ}C$에서는 초결 2시간, 종결 5시간정도 단축시키는 것으로 나타났다. 또한 외기온도 조건에 따른 고강도콘크리트의 수화발열 특성은 외기온도 $20^{\circ}C$와 $30^{\circ}C$에서는 최고온도 발현시간과 타설 깊이별 최고온도 등이 유사하게 나타났으나 외기온도 $40^{\circ}C$에서는 최고온도 발현시간이 약 4시간 빠르게 나타났으며, 타설 깊이별 최고온도는 평균 약 $12^{\circ}C$정도 높게 나타났다. 이와 같이 서중환경에서 제조, 시공되는 고강도콘크리트는 외기온도 조건에 따라 굳지 않은 콘크리트의 유동성, 충전성 및 경시변화 등의 특성이 상이하므로 외기온도의 영향을 고려한 작업성, 수화열에 의한 온도균열, 강도발현 특성 등의 검토를 통한 품질관리가 필요하다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.