• 한국농공학회지
• /
• 제36권3호
• /
• pp.90-99
• /
• 1994

To investigate the undrained shear strength characteristics of marine soils with high water content, high compressibility and weak bearing capacity, a series of undrained triaxial tests with pore pressure measurements on undisturbed and disturbed Banwol marine clay in normally consolidated and overconsolidated states is carried out. The results and main conclusions of this study are summarized as follows : 1 . When the consolidation pressure is increased, the maximum deviator stress of disturbed and undistubed clay in normally consolidated state is increased. Pore pressure parameters and internal friction angle of undisturbed clay are greater than those of disturbed clay. 2. The relationship between pore pressure and axial strain of undisturbed clay in normally consolidated state can be expressed as a hyperbolic function like stress-strain relation proposed by Kondner. 3. In the pore pressure-axial strain relation of disturbed clay in normally consolidated state, failure ratio R'f is greatly deviated in the range of 0.7~0.9 proposed by Christian and Desai. 4. For overconsolided clay, when overconsolidation ratio (OCR) is increased, normalized maximum deviator stress is increased and maximum pore pressure is decreased gradually. 5. Cohesion of overconsolidated clay is greater than that of nomally consolidated clay and internal friction angle slightly is decreased. 6. Pore pressure parameter at failure (Af) of overconsolidated clay is varied with OCR, Af becomes negative values with increment in OCR

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1997년도 총회 및 춘계 학술발표회 논문집
• /
• pp.70-73
• /
• 1997

산업폐기물의 재활용은 정부가 적극적으로 권장하고 있다. 폐석회의 비중, 건조단위중량. 일축 압축강도, pH, 투수계수 등의 지반특성을 실내시험결과를 고찰함으로써 폐석회가 매립장에서 인공차수재 및 복토재로 사용 가능성을 평가한다. 폐석회를 몇가지 환경실험을 통해서 그 결과를 EPA기준과 비교하였다. 본 논문에서는 실내실험을 수행한 결과를 전술하였고, 실험결과 분석에 의하면 혼합토(폐석회/화강풍화토)가 위생매립장의 인공차수재로 가능성이 있다고 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.123-136
• /
• 2004

Terzaghi의 1차원 압밀이론은 그 유도과정에 있어 몇 가지 중요한 가정사항을 내포하고 있으며, 이로인해 이 이론을 연약 점토지반의 압밀거동에 적용하는데는 많은 모순이 발생할 수 밖에 없다. 특히, 미소변형 및 선형 물질함수에 대한 가정은 실제 현장의 압밀현상과 비교할 때 많은 오류를 발생시키는 원인으로 작용한다. 이러한 이유에서, Gibson 등은 물질함수의 비선형성을 고려할 수 있는 1차원 비선형 유한변형률 압밀이론에 대한 엄밀해를 발표하였다. 그러나, 이 이론은 연직배수공법이 적용된 일반적인 연약 점토지반의 압밀현상에는 적용시킬 수 없다는 단점을 내포하고 있다. 본 연구에서는 포화된 지반의 수직 및 수평방향 배수를 고려하며 지반의 자중 및 투수성과 압축성에 대한 물질함수의 비선형적 특성을 반영할 수 있는 압밀모델을 제안하였다. 또한 제안된 모델을 실제 압밀현상에 적용하기 위한 수치해석 기법을 개발하였다. 수치해석에 이용된 물질함수의 특성은 표준압밀 시험 및 로우셀 시험, 개량 표준압밀 시험등을 이용하여 산정되었다.

• 한국지반환경공학회 논문집
• /
• 제7권3호
• /
• pp.43-54
• /
• 2006

채취된 초기 간극수를 오염물질로 치환시킨 점토시료를 대상으로 일축압축시험, 삼축압축시험, 압밀시험을 수행하여 오염물질 성상에 따른 오염점토의 역학적 특성변화를 분석하였으며, MT3D 해석모델을 이용하여 매립지 성토제방의 점토 차수층을 통한 오염물질의 거동 특성을 파악하였다. NaCl 수용액으로 치환된 시료의 경우, 농도가 증가할수록 강도, 압축성, 투수성이 증가되었다. 침출수로 포화시킨 시료의 경우, NaCl 수용액으로 포화시킨 시료에 비해 강도, 압축성의 증가현상이 크게 나타난 반면 면모화 정도가 큼에도 불구하고 투수계수는 오히려 작게 나타났다. 오염물질 이동 해석결과, 초기 염소이온 농도가 클수록 측정농도도 커지며, 시간경과에 따라 농도는 비선형적으로 증가되었다. 농도감쇄 관계식을 유도하여 이동거리를 예측한 결과, 초기 농도가 클수록 이동거리도 크게 나타났다.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.561-577
• /
• 2017

Vast parts of the east of Tabriz city have been covered by Baghmisheh formation marls. These marls can be classified into three types based on their color as identified in yellow, green, and gray marls. Many high-rise buildings and other projects were founded and now is constructing on these marls. Baghmisheh formation marls are classified as stiff soil to very weak rock, therefore they undergo considerable consolidation settlement under foundation loads. This study presents the physical properties and consolidation behavior of these marls. According to the XRD tests, major clay minerals of marls are Illite, Kaolinite, Montmorillonite and Chloride. Uniaxial compressive strength are 100-250, 300-480 and 500-560 kPa for yellow, green and gray marls, respectively. Consolidation and creep behavior of Baghmisheh marls investigated by using of one dimensional consolidation apparatus under stress level up to 5 MPa. The results indicate that yellow marls have high compressibility, settlement and deformation modules. Green marls have an intermediate compressibility and settlement and while gray marls have low compressibility and settlement and from the foundation point of view have high stability. According to the creep test results, all types of marls have not been entered to progressive creep phase up to pressure 5 MPa.

• 한국지반환경공학회 논문집
• /
• 제12권6호
• /
• pp.43-51
• /
• 2011

국내의 동 서 남해안에는 해성점토층이 폭넓게 분포되어 있으며, 해안지역에서 기반시설물을 설계할 때 압축성이 큰 해성점토로 구성된 연약지반의 공학적 특성을 파악하는 일은 매우 중요하다. 본 논문에서는 인천, 목포, 광양 및 부산지역 해성점토의 물리적 압축특성을 분석하여 각 지역 및 우리나라 서 남해안 점토특성을 비교하였다. 이를 위하여 114구역 1,471개 샘플의 실험결과를 이용하였다. 비교결과, 인천점토의 경우 중국 황하로부터 유입된 세립실트 및 높은 조수간만의 차로 가장 낮은 소성 및 높은 단위중량을 보였고, 광양점토는 광범위한 준설매립의 영향으로 압축성이 가장 컸다. 그와 비교할 때 목포 및 부산의 경우는 부분적으로 비슷한 수준의 특성을 나타내었다. 목포와 부산점토의 압축지수는 인천에 비하여 2배 이상, 광양점토의 경우는 목포 및 부산에 비해 70% 이상 높게 나타났다.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.69-79
• /
• 2019

This work presents an experimental study of the hydromechanical behavior of a natural swelling soil taken from Boumagueur region east of Algeria. Several pathological cases due to the soil shrinkage / swelling phenomenon were detected in this area. In a first part, the hydric behavior on drying-wetting paths was made, using the osmotic technics and saturated salts solutions to control suction. In The second part, using a new osmotic oedometer, the coupled behavior as a function of applied stresses and suction was investigated. It was shown that soil compressibility parameters was influenced by suction variations that an increase in suction is followed by a decrease in the virgin compression slope. On the other hand, the unloading slope of the oedometric curves was not obviously affected by the imposed suction. The decrease in suction strongly influences the apparent preconsolidation pressure, ie during swelling of the samples after wetting.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.361-368
• /
• 2000

In other to examine the compressibility characteristics of cohesive soils in the mouth of the Nakdong river, the oedometer tests were peformed on undisturbed and reconstituted samples obtained by continuous boring typically at 3 different sites. It is meaningful to compare the consolidation behavior of natural clays with a reference state because the natural clays are depending on the stress history, sedimentary environment and geological history. In this study, the insitu state of the Pusan clays was investigated using the concepts of ISL(Nagaraj, 2000) and ICL and SCL(Burland, 1990). And for the purpose of confirming the existence of the underconsolidated clays, a standpipe type piezometer test and a dissipation test by piezocone were performed at their sites. Consequently, the Pusan clays were evaluated as normally consolidated clays.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.982-989
• /
• 2005

In this study, a series of laboratory tests based on 'Unit-cell concept' are performed to investigate improvement characteristics of clay ground in sand compaction pile method. Settlement reduction characteristics of composite ground and improvement characteristics of clay part could be qualified. In these procedure, the new strain-compression index($C_{\epsilon}$) of composite ground are adopted to show compressibility of composite ground according to the area replacement ratio, which is similar to the compression index($C_c$) in pure clay ground. Also, using normalization of reduction of water content in composite ground to the initial water content, improvement characteristics of clay part are investigated.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.1-7
• /
• 2009

Talc as a coating pigment has been developed in order to replace GCC and clay for matte grade and has received much attention due to various advantages including good gravure printability. In order to elucidate the effects of talc on gravure printability, model papers were produced with three kinds of coating talc whose particle size and brightness are different. Physical properties related to surface and structure and the gravure printability of the sample were tested. Coating color with talc showed lower viscosity than that with clay. For both matte and art grades, talc tended to give lower gloss than day. The smaller the particle size of talc, the better properties in the coating color viscosity and water retention. When the particle size of talc was small enough, the surface roughness of the coated paper produced with talc was similar to that with clay while larger talcs produced rougher surface than clay. On top of that, application of talc improved compressibility and gravure printability of coated paper.