• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.553-564
• /
• 2022

Many existing reinforced concrete (RC) structures need to be strengthening for reason such as poor construction quality, low ductility or designing without considering seismic effects. One of the strengthening methods is strengthening technique with eccentrically braced frames (EBFs). The characteristic element of these systems is the link element and its length is very important in terms of seismic behavior. The link element of Y shaped EBF systems (YEBFs) is designed as a short shear element. Different limits are suggested in the literature for the link length. This study to aim experimentally investigate the effect of the link length for the suggested limits on the behavior of the RC frame system and efficiency of strengthening technique. For this purpose, a total of 5 single story, single span RC frame specimens were produced. The design of the RC frames was made considering seismic design deficiencies. Four of the produced specimens were strengthened and one of them remained as bare specimen. The steel YEBFs were used in strengthening the RC frame and the link was designed as a shear element that have different length with respect to suggested limits in literature. The length of links was determined as 50mm, 100mm, 150mm and 200mm. All of the specimens were tested under cyclic loads. The obtained results show that the strengthening technique improved the energy consumption and lateral load bearing capacities of the bare RC specimen. Moreover, it is concluded that the specimens YB-2 and YB-3 showed better performance than the other specimens, especially in energy consumption and ductility.

• Earthquakes and Structures
• /
• v.23 no.6
• /
• pp.527-534
• /
• 2022

EDCC (Eco-Friendly Ductile Cementitious Composites) is a recently created class of engineered cementitious composites that exhibit extremely high ductility and elastoplastic behavior under pure tension. EDCC contains reduced amounts of cement and very large volumes of fly ash. Due to these properties, EDCC has become one of the solutions to use in seismic upgrading. This paper discloses previous studies and research that discussed the seismic upgrading of unreinforced, non-grouted, unconfined, and non-load bearing masonry walls which are called URM infill walls using the EDCC technique. URM infill wall is one of the weak links in the building structure to withstand the earthquake waves, as the brittle behavior of the URM infill walls behaves poorly during seismic events. The purpose of this study is to fill a knowledge gap about the theoretical and experimental ways to use the EDCC in URM infill walls. The findings reflect the ability of the EDCC to change the behavior from brittle to ductile to a certain percentage behavior, increasing the overall drift before collapse as it increases the energy dissipation, and resists significant shaking under extensive levels with various types and intensities.

• The Journal of Information Technology and Database
• /
• v.1 no.1
• /
• pp.31-62
• /
• 1994

Information systems for application areas like office automation, customer service or computer aided manufacturing are usually highly interactive and deal with complex document structures composed of multiple media formats. For the realization of these systems, nonstandard database systems, which we call document databases, need to handle different types of coarse-and fine-grained document objects(like full-text documents, graphics and images), hierarchical and non-hierarchical relationships between objects(like composition-links and cross-references using hypertext structures) and document attributes of different types such as formatting/presentation information and access control. In this paper, we present the underlying data model for document databases based on descriptive markup languages that provide mechanisms for specifying the logical structure(or schema) of individual documents stored in the database. We then describe extensions to the data model for supporting notion of composite structures("join" operators for documents) --composition and hyperlinking mechanisms for representing compound documents and inter-linked documents as unique entites separate from their components. Furthermore, due to the interactive nature of the application domains, the database system in conjunction with clients(or browsers) has to support visual navigation and graphical query mechanisms. We describe the functionality of a new user interface paradigm called HyBrow for meeting the above mentioned requirements. The underlying implementation strategy is also discussed.discussed.

• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.817-828
• /
• 2022

In this study, considering dissipated energy in fracture process zone (FPZ), a novel criterion based on maximum strain energy release rate (SER) for orthotropic materials is presented. General case of in-plane loading for cracks along the fibers is assumed. According to the experimental observations, crack propagation is supposed along the fibers and the reinforcement isotropic solid (RIS) concept is employed as a superior model for orthotropic materials. SER in crack initiation and propagation phases is investigated. Elastic properties of FPZ are extracted as a function of undamaged matrix media and micro-crack density. This criterion meaningfully links between dissipated energy due to toughening mechanisms of FPZ and the macroscopic fracture by defining stress intensity factors of the damaged zone. These coefficients are used in equations of maximum SER criterion. The effect of crack initiation angle and the damaged zone is considered simultaneously in this criterion and mode II stress intensity factor is extracted in terms of stress intensity factors of damage zone and crack initiation angle. This criterion can evaluate the effects of FPZ on the fracture behavior of orthotropic material. Good agreement between extracted fracture limit curves (FLC's) and available experimental data proves the ability of the new proposed criterion.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.113-124
• /
• 2019

In this study, the operational characteristics of a cam-type vegetable transplanter which usually used in domestic was analyzed and operating mechanism of a transplanting device was analyzed. The main components and power path of the transplanter were analyzed. The maximum and minimum control cycles according to the moving speed and the plant spacing were analyzed. 3D modeling and simulation were performed to derive the trajectory of the bottom end of the transplanting hopper and the plant spacing at the each operating condition. The simulation results were verified by the field tests. As main findings of this study, the transplanting device has one degree of freedom (DOF) which consist of 13 links, 17 rotating joints and 1 half joint, and each part has composite structure with cam and links. By continuous and repetitive motion of the structures of transplanting device, the transplanting hopper plants the seedling in the ground with a vertical direction, and the seedling was planted stably. The power is transmitted to the driving part and transplanting device from the engine, and the maximum and minimum plant spacing of the transplanting device were about 900 mm and 350 mm, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.492-497
• /
• 2011

Helicopter uses a rotor system to generate lift, thrust and forces, and its aerodynamic environment is generally complex. Unsteady aerodynamic environment arises such as blade vortex interaction. This unsteady aerodynamic environment induces vibratory aerodynamic loads and high aeroacoustic noise. Those are at N times the rotor blade revolutions (N/rev). But conventional rotor control system composed of pitch links and swash plate is not capable of adjusting such vibratory loads because its control is restricted to 1/rev. Many active control methodologies have been examined to alleviate the problem. The blade using active control device manipulates the blade pitch angle at arbitrary frequencies. In this paper, Active Trailing-edge Flap blade, which is one of the active control methods, is designed to modify the unsteady aerodynamic loads. Active Trailing-edge Flap blade uses a trailing edge flap manipulated by an actuator to change camber of the airfoil. Piezoelectric actuators are installed inside the blade to manipulate the trailing edge flap.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.209-222
• /
• 2013

Eccentric axial loading test was performed for concrete-encased columns using 800MPa steel and 100MPa concrete. To maximize the contribution of the high-strength steel, L-shaped steel sections were placed at four corners, and connected to each other by lattices, links, or battens. Compared to a H-section of the same area, the moment-arm and strain of the L-sections are increased. Also, the corner L-sections provide good lateral confinement to concrete core. The test results showed that the peak strength and effective flexural stiffness of the L-section columns were increased by more than 1.4 times those of the H-section column.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.4
• /
• pp.199-204
• /
• 2023

Production technologies in the imaging sector are innovating continuously and due to the visual experiences of powerful screen effects using 3D technologies, the public is now pursuing higher quality and more realistic visual effects. 3D production software with greater performance to realize this are now flooding the market, but artificial manual work and traditional hand-painting HDRI production methods still exist. There are few studies on new methods using HDRI production software using the computer's high performance data operations. In order to improve HDRI pipelines, this study links the two technological points of 'Nuke' and 'Photoshop' and it reduced production time and the improvements of quality were verified by using pipelines with new convergence methods.

• The Korean Journal of Financial Management
• /
• v.22 no.2
• /
• pp.165-187
• /
• 2005

This paper tries to investigate the relationships among stock return volatility, time-varying risk premium and Korea Discount. Using Korean Composite Stock Price Index (KOSPI) return from January 4, 1980 to August 31, 2005, this study finds possible links between time-varying risk premium and Korea Discount. First of all, this study classifies Korean stock returns during the sample period by three regime-switching volatility period that is to say, low-volatile period medium-volatile period and highly-volatile period by estimating Markov-Switching ARCH model. During the highly volatile period of Korean stock return (09/01/1997-05/31/2001), the estimated time-varying unit risk premium from the jump-diffusion GARCH model was 0.3625, where as during the low volatile period (01/04/1980-l1/30/1985), the time-varying unit risk premium was estimated 0.0284 from the jump diffusion GARCH model, which was about thirteen times less than that. This study seems to find the evidence that highly volatile Korean stock market may induce large time-varying risk premium from the investors and this may lead to Korea discount.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.329-339
• /
• 2009

A historical and cultural map needs an overall reflection of the links based on time and space among the various composite factors, instead of requiring a simple collection of the respective relics in a particular region. The study of history, culture and living environment of river system area, a place that is known to as a cradle of civilization, will be able to undertake a role in the research and comparison with other cultural regions, reaching beyond the regional units until now and moreover investigation the international and intercontinental history of civilization. In this context, this research focuses on the establishment of a cultural information system for the public use and the insight to the regional identity and materialization of culture based on Korea's peculiar history and culture. Thus, the information system for Youngsan River area aims to create a form of electronic map that contains various cultural and historical information on river system area, which is a integrated information system based on Web GIS that is open to public use through the internet. The above mentioned system is a combined product from the basic research data on various fields of study, including archaeology, architecture, arts, ecological environment, history, folk customs, literature, and food, while it aims for not only its utilization in interdisciplinary studies but also creating new value as a public database. As a result, the expected effects due to the establishment of historical and cultural information system based on Web GIS of Youngsan River area are as follows: First, the study can contribute to verify a road map of the study on Youngsan River area. Second, it will take a role to stimulate the academical research on the dynamic structure and characteristics of the Youngsan River area. Third, we can also expect an effect of gaining a full foothold in providing an electronic academic source specialized for the study of the historical and cultural map.