• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.99-106
• /
• 2023

The purpose of this study was to identify the factors affecting depression according to the causes of suicidal ideation. The data used the 2021 Community Health Survey data. The participants of the study were 5,328 adults between the ages of 20 and 60 who responded that they had suicidal thoughts in the past year. For the analysis of the data, a composite sample analysis was performed using the SPSS 25.0 program. The results of the study are as follows. 1) In the economic difficulties group, age, gender, education level, economic activity, job change due to COVID-19, life satisfaction, subjective health status, stress, sleep time, and annual unmet medical care were the main factors related to depression. 2) In the interpersonal problem group, age, gender, education level, economic activity, life satisfaction, subjective health status, smoking, drinking, stress, and sleeping time were the main factors associated with depression. 3) In the disease and disability group, age, marital status, education level, life satisfaction, smoking, stress, sleep time, and annual unmet medical care were the main influencing factors of depression. Therefore, in order to reduce the rate of suicide and prevent depression, it is necessary to establish various strategies according to the causes of suicidal ideation and the influencing factors of depression.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• Journal of Applied Biological Chemistry
• /
• v.53 no.3
• /
• pp.126-131
• /
• 2010

In order to maximize the growth of Bifidobacterium lactis BL 740 and soy isoflavone agycones production, we investigated the optimization of a culture medium containing soy hypocotyls, which are the byproducts of the soy manufacturing process, and soy proteins. The ingredients of the medium containing soy materials (S-medium) were selected by fractional factorial design (FFD) and central composite design (CCD) within a desirable range. The FFD was applied by six factors: glucose, cellobiose, fructooligosaccharide, soy peptone, soy protein, and soy hypocotyl. Soy protein, soy peptone, and soy hypocotyl were found to be significant factors from the result of FFD for both the growth of B. lactis BL 740 and aglycone production. The CCD was then applied with three variables found from FFD at five levels each and the optimum values were determined for the three variables: soy peptone, soy protein, and soy hypocotyl. In the case of the growth of B. lactics BL740, the proposed optimal media contained 12.73 g/L of soy protein, 29.55 g/L of soy peptone, and 130.67 g/L of soy hypocotyl. To produce isoflavone aglycones, optimized media was composed of 2.06 g/L, soy protein, 1.25 g/L of soy peptone, and 60.02 g/L of soy hypocotyl.

• Composites Research
• /
• v.30 no.6
• /
• pp.379-383
• /
• 2017

A study on the low Earth orbit (LEO) space environment have been conducted as a use of composites have increased. Among the LEO environmental factors, atomic oxygen is one of the most critical factors because atomic oxygen can react and erode a surface of polymer-based composite materials. POSS (Polyhedral Oligomeric Silsesquioxane) materials have been widely studied as an atomic oxygen-resistant nanomaterial. In this study, nanocomposites, which are composed of OG (Octaglycidyldimethylsilyl) POSS nanomaterials and DGEBA/DDM epoxy, were fabricated to find out its thermal and mechanical properties. FT-IR results showed that the nanocomposites were fully cured and contained OG POSS enough. Thermogravimetric analysis and differential scanning calorimetry were performed to measure the thermal properties of the nanocomposites. The initial mass loss temperature and char yield were increased through the filling of OG POSS. As the content of OG POSS increased, glass transition temperature tended to increase to 5 wt.% of OG POSS, but the temperature decreased significantly at 10 wt.% of OG POSS. The tensile test results showed that the content of OG POSS did not affect tensile strength and tensile stiffness.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.18-22
• /
• 2012

Photocurable binder for a transparent glass fiber composite was prepared with alicyclic methacrylate and fluorene-based diacrylate. ANOVA (analysis of variance) analysis was used to know main factors affecting the conversion of photocurable binder. It showed radiation intensity and photoinitiator (PI) concentration were main factors. The conversion of photocurable binder was simply increased with radiation intensity. Its increment however was abated with increasing PI concentration. We found that average conversion of the binder measured by FTIR-ATR was 87% when it was exposed to $5J/cm^2$ of UV dose with 5 wt% of PI. Oxime ester type PI was very effective to get a high degree of conversion, but it caused a yellowing problem. Owing to post-baking process, UV cured film showed an improved thermal stability by increase of conversion and removal of volatile organic compounds. TG% at $260^{\circ}C$ of film cured with 5 wt% of PI (TPO+MBF) and $5J/cm^2$ of UV radiation increased from 95.4 to 99.0% by post-baking at $230^{\circ}C$ for 5 min.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.183-190
• /
• 2011

Loan amount of housing mortgage is composed of various factors. This study paper studies focuses on estimating the determinants of a loan amount of housing mortgage. The region for analysis consist of seven groups, that is, metropolitan city (such as Busan, Daegu, Incheon, Gwangiu, Daejeon, Ulsan.) and Seoul. Analyzing period be formed over a 45 time points(2007. 01.~ 2010. 09). In this paper the dependent variable setting up loan amount of housing mortgage, explanatory(independent) variables are composed of the consumer price index, unemployment rate, average monthly household income per household, expenditure rate of health care, composite stock price index and overdue rate of household loans for commercial bank. In looking at the factors which determine loan amount of housing mortgage, evidence was produced supporting the hypothesis that there is a significant positive relationship between the consumer price index and unemployment rate. The study also produced evidence supporting the view that there is a significant negative relationship between expenditure rate of health care. The study found that average monthly household income per household, expenditure, composite stock price index and overdue rate of household loans for commercial bank were not significant variables. The implications of these findings are discussed for further research.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.861-872
• /
• 2022

The purpose of this study was to establish a complex disaster scenario that can comprehensively consider various disaster situations that may occur in the utility tunnel. Method: In order to comprehensively consider the correlation between disasters, a composite disaster scenario was derived from a combination of damage factors, respectively. A risk assessment was performed in order to derive the priorities of the scenarios. And based on the results, the priorities of complex disaster scenarios were set. Result: Based on the disaster cases in the utility tunnel, a plan was prepared for complex disaster scenarios centered on damage. A complex disaster scenario was specified using a semi-quantitative evaluation method for single and multiple disaster factors such as fire, flooding, and earthquake. Conclusion: The composite disaster scenario derived from this study can be used for the prevention and preparation of damage when the precursor symptoms of a disaster are detected. In addition, the results of this study are expected to be used as basic data for preparing strategic plans and preparing complex disaster response technologies to induce rapid response and recovery in case of emergency disasters.

• Composites Research
• /
• v.20 no.5
• /
• pp.64-69
• /
• 2007

Matrix dominant properties of composites are largely degraded under harmful environments such as temperature and humidity. Therefore we should consider the harmful environmental factors in the design of an UAV integral fuel tank subjected to high temperature and high humidity. The harmful environment experiment was performed for carbon/epoxy composites made of a unidirectional prepreg USN175B, and a plain woven fabric prepreg WSN3. The immersion experiment was performed under $90^{\circ}C$. The specimens were tested when the weight gam of specimen was saturated. The specimens were tested under $74^{\circ}C$ to obtain tensile and inplane shear properties. The results showed that the matrix dominant properties were extremely degraded by hygrothermal environment. To consider the variability of load, the anti-optimization method was applied. By using this method, the worst load case was found by comparing the load convex model and stability boundary. The stability boundary was obtained by analysis of the integral wing fuel tank of UAV using degraded properties. To do this, it was known that the worst load case of the integral wing fuel tank was the hovering mode load case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.649-656
• /
• 2008

The enhancement of the service life of damaged or cracked structures is a major issue for researchers and engineers. The hierarchic void element based on the integrals of Legendre polynomials is used to characterize the fracture behaviour of unpatched crack as well as repaired crack with bonded composite patches by computing the stress intensity factors and stress contours at the crack tip. Since the equivalent single layer approach is adopted in this study, the proposed element is necessary to represent a discontinuous crack part as a continuum body with zero stiffness. Thus the aspect ratio of this element to represent the crack should be extremely slender. The sensitivity of numerical solution with respect to energy release rate, displacement and stress has been tested to show the robustness of zero stiffness element as the aspect ratio is increased up to 2000. The stiffness derivative method and displacement extrapolation method have been applied to calculate the stress intensity factors of Mode I problem. It is noted that the proposed hierarchical void element can be one of alternatives to analyze the patched crack problems.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.335-346
• /
• 2013

AASHTO LRFD and Korean Bridge Design Code (Limit State Design) specify to consider Truck and Lane load simultaneously determined from reliability-based live load model, and impact shall be applied to the truck load while it shall not be applied to the lane load. In this paper, vehicle-bridge interaction analysis under moving truck and lane loads were performed to estimate impact factor of the cables and girders for the selected multi-cable-stayed composite bridges with 230m, 400m and 540m main span. A 6-d.o.f. vehicle was used for truck load and a series of single-axle vehicles was applied to simulate equivalent lane load. The effect of damping ratio on the impact factor was estimated and then the essential parameters to impact factor, i.e., road surface roughness and vehicle speed were considered. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck load only in the vehicle-bridge interaction analysis. The impact factors evaluated from dynamic interaction analysis were also compared with those by the influence line method that is currently used in design practice to estimate impact factor in cable-stayed bridge.