• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.120-128
• /
• 2015

In this paper, Residential roof top photovoltaic system with 9.9 kW design is proposed. The system composed of 200 Watts solar array 33 panels connecting in series 10 strings and parallels 3 strings which have maximum voltage and current are 350 V and 23.8 A. The 10 kW sinusoidal grid-connected inverter with window voltage about 270-350 is selected to convert and transfer DC Power to AC Power at PCC (Point of Common Coupling) of power system following to utility standard. However the impact of fluctuation and uncertainty of weather condition of PV may decrease the voltage stability and voltage collapse of power system. In order to solve this problem the energy storage such 120 V 1200 Ah battery bank and 30 kVAR capacitor are designed for voltage stability control. The other expensed for installing the system such battery charger, cable, accessories and maintenance cost are concerned. The economic analysis by using investment from money loan with interest about 7% and use own money which loss income of deposit about 3% are calculated as 671,844 and 547,044 for PV system with energy storage and non energy storage respectively. The solar energy from PV is about 101,616 Bath per year which evaluated by using the value of $5kWh/m^2/day$ from average peak sun hour (PSH) of the Thailand and 6.96 Bath/kWh of Feed in Tariff Incentive. The payback periods of four scenarios are proposed follow as i) PV system with energy storage and use loan money is 15 years ii) PV system with no energy storage and use loan money is 10 years iii) PV system with energy storage and use deposit money is 9 years iv) PV system with energy storage and use deposit money is 7 years. In addition, the other scenarios of economic analysis such no FIT support and other type of economic analysis such NPV and IRR are proposed in this paper.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.777-788
• /
• 2014

This paper presents a wide output range, high power efficiency reconfigurable charge pump for driving touch panels with the high resistances. The charge pump is composed of 4-stages and its configuration automatically changes based on the required output voltage level. In order to keep the power efficiency over the wide output voltage range, internal blocks are automatically activated or deactivated by the clock driver in the reconfigurable charge pump minimizing the switching power loss due to the On and Off operations of MOSFET. In addition, the leakage current paths in each mode are blocked to compensate for the variation of power efficiency with respect to the wide output voltage range. This chip is fabricated using $0.18{\mu}m$ BCD process with high power MOSFET options, and the die area is $1870{\mu}m{\times}1430{\mu}m$. The power consumption of the charge pump itself is 79.13 mW when the output power is 415.45 mW at the high voltage mode, while it is 20.097 mW when the output power is 89.903 mW at the low voltage mode. The measured maximum power efficiency is 84.01 %, when the output voltage is from 7.43 V to 12.23 V.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.207-218
• /
• 2017

This study evaluates the difference in visual images according to changes in waist position and pants style. The researcher made twelve stimuli-combination of four pants styles (classic, baggy, skinny, bell-bottom) and three waist positions (0cm, -3cm, -5cm). The test involved 48 female college students. The stimuli were made using the i-Designer computer program. The panels tested the screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, the ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. The visual evaluations by pants style and waist position are composed of seven factors (attractiveness, attention, hip, activity, height, waist, abdomen). Among these factors, attractiveness is evaluated to be the most important factor. The mutual agreement of the visual effect (according to pants style and waist position) was indicated as four factors of attractiveness, attention, waist, and abdomen. The height factor is evaluated to be the most important factor by change in regards to waist position. The 0cm waist position of three styles (classic, baggy, bell-bottom) were evaluated positively in elongated height whereas the -3cm, -5cm waist position of the skinny style was evaluated positively in elongated height. The mutual agreements of visual effect (according to pants style and waist position) were not indicated.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.347-357
• /
• 2013

The nursery active-wear uniform designs of Internet shopping malls are simple and similar; however, the latest children's wear trends (mostly composed of training jumpers and pants) do not reflect these qualities. Children's folklore plays (widely used in child education) have an instructive value for the emotional and intellectual development of a child. Nursery active-wear uniform designs applied to children's folklore's plays could be positive for the emotional development and specialized cultural education of children. We designed three nursery active-wear uniforms with three different design concepts (casual, semi-formal and sporty) regardless of sex. The main color of the three nursery active-wear uniforms was yellow. We used three different chroma and values of yellow through three design concepts: Design I of a nursery active-wear uniform (a training suit style with a good activity), Design II of a nursery active-wear uniform (a semi suit style), and Design III of a nursery active-wear uniform (a sportswear style that reflected a sport wear trend). We expressed children's folklore plays in the pattern of a nursery active-wear uniform. The pattern was characterized as a pair of bears flying kites. This pattern was utilized in three nursery active-wear uniforms with the logo and name of the nursery. We modified the designs of active-wear nursery uniforms based on an evaluation of 33 special panels. We made three nursery active-wear uniforms for five-year olds.

• Journal of Korean Clinical Nursing Research
• /
• v.23 no.2
• /
• pp.236-247
• /
• 2017

Purpose: This study was to present improvement strategy and the problems of the nursing fee in national health insurance system. Methods: A total of 23 nursing activities performed by nurses were selected. Data were collected the relative value score and criteria of the Health Insurance Review & Assessment Agency. Sixty clinical nursing experts panels were composed and nursing time surveyed self-reported method. The actual fee was calculated through the nursing time, relative value score and actual labor costs. Nextly, the labor costs analyzed was compared with that in the national health insurance. Results: Although the practices were mainly performed by the nurse, other occupations have been recorded as main practitioners and the time of the nursing activity is partially improperly reflected. Additionally, although the nurse practiced mainly in glucose (semi-quantitative) test, it was confirmed that the principal practitioner was described as a clinical pathologist. The the labor cost gap was estimated that is 9.3 times (median) and 11.9 times (average) in this analysis. Conclusion: This study suggests that it is necessary to legislate a policy that can improve the quality of clinical nursing by reinforcing the appropriateness and improving nursing fee through reflection of the actual time spent for nursing care.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.213-221
• /
• 2011

In this study, we discussed the weight reducing of a urban railway-car body, in particular, of the Korean EMU, by optimizing topology and size of aluminum extrusion profiles. The heaviest parts of aluminum railway-car bodies, i.e., the base plate of underframe and side panels of side frame composed of double skin structures are considered for optimization. Topology optimization process is applied to obtain get an optimized rib structure for the base plate. The thickness of ribs and plates of the topologically optimized base plate and the existing side panel are also optimized by employing the size optimization process. The results are verified by comparing the maximum von Mises stresses and maximum deformation in the case of the existing design with those in the case of the optimized design. It is shown that the weight of a base plate and side panel can be reduced by 12% and that the weight of the whole car body can be reduced by 8.5%.

• The Korean Journal of Franchise Management
• /
• v.11 no.2
• /
• pp.23-39
• /
• 2020

Purpose: Social Network Sites(SNS) have been grown up as a public communication channel consumer frequently participate in. Most of food service brands are utilizing social media for advertising recently. As a result of SNS marketing, food service brands anticipate positive outputs from SNS engagement and consumer brand engagement so that we need to verify structural relationship among SNS characteristics, SNS engagement and consumer brand engagement. Research design, data, and methodology: This study identifies that SNS characteristics have effects on SNS engagement and examines relationship between SNS engagement and behavioral engagement. We conceptualize SNS characteristics as information quality, hedonic level and interaction. Furthermore, SNS engagement is composed of SNS participation, positive word of mouth(WOM). In order to verify the purposes of this research, research model and hypotheses were developed. All constructs were measured with multiple items developed and tested in the previous studies. Sample data were collected from 433 online survey panels and analyzed by using SmartPLS 3.2.9. Result: The findings of this research are as follows. First, information quality is positively related with SNS participation. Hedonic level and interaction have impacts on SNS participation and positive WOM respectively. Second, SNS participation has positive effects on positive WOM. Third, both SNS participation and WOM influence behavioral engagement respectively. Conclusions: The implications demonstrate that SNS characteristics such as information quality and hedonic level and interaction exert effects for consumer to participate in SNS brand page. Meanwhile, hedonic level and interaction influence on positive WOM but information quality doesn't. SNS participation and positive WOM affect consumer to engage in specific brand behaviorally as well. Therefore, food service brand marketer is required to manage SNS information quality and hedonic level and interaction among members to encourage SNS participation and positive WOM. As SNS participation and positive WOM increases behavioral engagement of consumer, marketer needs to incentivize SNS participation and look after situation of positive WOM and respond swiftly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.149-159
• /
• 2010

This paper presents an experimental study on the structural behavior of composite CFT truss girder bridge with full depth precast panels. The length of span is 20,000 mm. The CFT truss girder is a tubular truss composed of chord members made of concrete-filled and hollow circular tubes. To determine fundamental structural characteristics such as the strength and deformation properties of composite CFT truss girder bridge, static and dynamic tests were conducted. The natural frequencies calculated by the FEM are in good agreement with experimental results obtained from dynamic test. Bracing have only a small effect on the natural frequencies of composite CFT truss girder bridge as indicated by the FEM results. The yield strength and deformation of the composite CFT truss girder bridges were investigated through a static bending test. Besides, the test results showed that uniform distribution of shear connectors can be applicable in composite CFT truss girder bridges.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.599-612
• /
• 2017

Human hair (HH) is produced as a waste from beauty parlor and barbershop. HH-based adhesives were formulated with NaOH-hydrolyzed HH, $H_2SO_4$-hydrolyzed chicken blood (CB) and PF as a crosslinking agent. Physicochemical properties and retention rate against hot water of the adhesives were measured to investigate the potential of HH as a raw material of wood adhesives. HH was composed of keratin-type protein of 80% and over. Ash of less than 0.1% was contained in HH. Among the amino acids included in HH, glutamic acid showed the highest content, followed by cysteine, serine, arginine and threonine. Solid content of the adhesives ranged from 33.2% to 41.8% depending on hydrolysis conditions of HH and PF type. Viscosity at $25^{\circ}C$ ranged from 300 to $600mPa{\cdot}s$ resulting in a sprayable adhesive. Retention rate against hot water measured to evaluate the water resistance of adhesives was the highest in the cured resin formulated with 5% NaOH-hydrolyzed HH and 5% $H_2SO_4$-hydrolyzed CB. Meanwhile, the molar ratio of formaldehyde to phenol in PF did not have a significant impact on the retention rate of HH-based adhesives. When the retention rates of HH-based adhesives were compared to those of conventional wood adhesive resins used for the production of wood-based panels extensively, HH-based adhesives formulated with 30 wt% PF showed lower retention rate than commercial urea-formaldehyde resin. However, when PF content was increased to 35 wt%, the retention rate greatly increased and approached to that of commercial melamine-urea-formaldehyde resin. Except for the results mentioned above, the analysis of economic feasibility suggests that HH-based adhesives can be used for the production of wood-based panels if HH is hydrolyzed in proper conditions and then the HH-based adhesives are formulated by the HH hydrolyzates with 35 wt% PF.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.95-102
• /
• 2012

The serious issue of tall building is to ensure the fire resistance of high strength concrete. Therefore, Solving methods are required to control the explosive spalling. The fire resistant finishing method is installed by applying a fire resistant material as a light-weight material to structural steel and concrete surface. This method can reduce the temperature increase of the reinforcement embedded in structural steel and concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of light-weight fire protection material compounds including the inorganic admixture such as fly ash, meta-kaolin and light-weight aggregate as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. Also, this paper is concerned with change in microstructure and dehydration of the light-weight fire protection materials at high temperatures. The testing methods of fire protection materials in high temperature properties are make use of SEM and XRD. The study results show that the light-weight fire resistant finishing material composed of fly ash, meta-kaolin and light-weight aggregate has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Developed light-weight fire protection materials showed good stability in high Temperatures. Thus, the results indicate that it is possible to fireproof panels, fire protection of materials.