• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.31-48
• /
• 2024

The domestic automotive industry must consider a strategic shift from traditional automotive component manufacturing to align with future trends such as connectivity, autonomous driving, sharing, and electrification. This research conducted topic modeling on R&D projects in the future automotive sector funded by the Ministry of Trade, Industry, and Energy from 2013 to 2021. We found that topics such as sensors, communication, driver assistance technology, and battery and power technology remained consistently prominent throughout the entire period. Conversely, topics like high-strength lightweight chassis were observed only in the first period, while topics like AI, big data, and hydrogen fuel cells gained increasing importance in the second and third periods. Furthermore, this research analyzed the areas of concentrated investment for each period based on topic-specific government investment amounts and investment growth rates.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.773-784
• /
• 2023

In this study, we developed a dynamic model and steering controller model for an autonomous tractor and evaluated their performance. The traction force was measured using a 6-component load cell, and the rotational speed of the wheels was monitored using proximity sensors installed on the axles. Torque sensors were employed to measure the axle torque. The PI (proportional integral) controller's coefficients were determined using the trial-error method. The coefficient of the P varied in the range of 0.1 - 0.5 and the I coefficient was determined in 3 increments of 0.01, 0.05, and 0.1. To validate the simulation model, we conducted RMS (root mean square) comparisons between the measured data of axle torque and the simulation results. The performance of the steering controller model was evaluated by analyzing the damping ratio calculated with the first and second overshoots. The average front and rear axle torque ranged from 3.29 - 3.44 and 6.98 - 7.41 kNm, respectively. The average rotational speed of the wheel ranged from 29.21 - 30.55 rpm at the front, and from 21.46 - 21.63 rpm at the rear. The steering controller model exhibited the most stable control performance when the coefficients of P and I were set at 0.5 and 0.01, respectively. The RMS analysis of the axle torque results indicated that the left and right wheel errors were approximately 1.52% and 2.61% (at front) and 7.45% and 7.28% (at rear), respectively.

• Journal of the Korean Society for information Management
• /
• v.41 no.2
• /
• pp.71-96
• /
• 2024

This study focused on the fact that limitations of implementing school-centric models and standards of information literacy construction. This study was conducted with the purpose of developing and validating an instructional model to effectively design and practice online information literacy instruction for upper elementary school students based on a public library. Through a review of prior literature and analysis of current status and cases, a primary model was developed including the definition and area of information literacy, learning stages and activities, conceptual and procedural model, and teaching and learning plan. In addition, the first and second expert surveys were conducted to evaluate the internal validity of the model. The final model was derived by synthesizing and converging the collected opinions. As a result of the study, the final model consisted of 7 areas: 'Information literacy concept', 'Instruction component area', 'Conceptual model', 'Procedure model', 'Design principles and detailed guidelines', and 'Learning Steps and Activities' and 'Teaching and Learning Plan'.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.121-127
• /
• 2024

In this paper, FEM (Front-End Module) MMIC, a key component for the application of the satellite communication terminal transmission and reception module of the multi-phase array structure, was designed and verified as a single chip by designing the Power Amplifier (PA) and the Low Noise Amplifier (LNA). It was manufactured using the GaAs PP10 (100nm) process, a compound semiconductor process from Win-semiconductors, and the operating frequency band of 7.2-10.5GHz operation, output 1W, and noise index of 1.5dB or less were secured using a dedicated test board. The developed FEM MMIC can be used as a single chip, and the components PA and LNA can also be used as each device. The developed device will be used in various applications of Minsu/Gunsu using the X band and the localization of overseas parts.

• Journal of Korean Society on Water Environment
• /
• v.40 no.5
• /
• pp.243-257
• /
• 2024

Although lakes are an important part of freshwater, research on biological methods for assessing ecological integrity of Korean lakes is insufficient. Therefore, this study aimed to develop Lakes Benthic Macroinvertebrates Multi-Metric Index (LBMMI) to assess the ecological integrity of lakes in Korea to further understand Korean lake's ecosystem. We used biological data from 388 sampling units of national lake monitoring programs from 2022 to 2023 and water quality data from Water Environment Information System (WEIS). As a result, firstly, reference points and disturbed points were selected through Principal Component Analysis (PCA). Secondly, six core metric elements (Pielou's Evenness index (J), Total number of taxa (To.t), Percent of taxa in insecta (% I.t), Percent of individuals in Oligochaeta and chironomidae(tuble) (% OliCht.i), Percent of taxa in Predator (% Pe.t), and Percent of taxa in Clingers (% CL.t) were selected through discriminant analysis and relationship-test. Lastly, LBMMI was calculated for each sampling point by scoring using core metric elements and five grades were assigned for LBMMI scores using a Beta probability distribution model, with the suitability of LBMMI reviewed by comparing it with TSI_KO. LBMMI developed in this study is expected to appropriately assess ecological integrity of Korean lakes and provide a basis for further research on lake environment conservation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.5
• /
• pp.119-134
• /
• 2018

Today, many firms face the environment of high uncertainty and severe competition due to the rapid technology development and the diverse needs of customers. In the business environment, one of the most important ways to gain sustainable competitive advantage and future growth engine is related to NPD (New Product Development), which is a very important issue for practice and academia. Thus, this study intends to provide new values to practitioners and researchers related to NPD by analyzing current research trends and future trends in NPD field. For this, we bibliometrically analyzed keyword networks which consist of keywords that were already published in the eminent journals from Scopus database to generate insights that have not been captured in the previous reviews on the topic. As a result, we could understand the extant research streams in NPD field, and suggest the changes of specific research topics based on the connected relationships among keywords over the time. In addition, we also foresaw the general future research trends in NPD field based on the keywords according to preferential attachment processes. Through this study, it was confirmed that NPD keyword network is a small world network that follows the distribution of power law and the growth of network is formed by link formation by keyword preferential attachment. In addition, through component analysis and centrality analysis, keywords such as Innovation, New product innovation, Risk management, Concurrent engineering, Research and development, and Product life cycle management are highly centralized in NPD keyword network. On the other hand, as a result of examining the change of preferential attachment of keywords over the time, we suggested the required new research direction including i) NPD collaboration with suppliers, ii) NPD considering market uncertainty, iii) NPD considering convergence with the other academic areas like technology management and knowledge management, iv) NPD from SME(Small and medium enterprises) perspective. The results of this study can be used to determine the research trends of NPD and the new research themes for interdisciplinary studies with other disciplines.

• Journal of Korean Academy of Nursing
• /
• v.11 no.2
• /
• pp.5-8
• /
• 1981

This study concerns itself with the development of a new model of comprehensive health service for rural communities of Korea. The study was conceived to resolve the problems of both underservice in rural communities and underutilization of valuable health manpower, namely the nurses, the disenchanted elite health personnel in Korea. On review of the current situation, the greatest deficiencies in the Korean health care system were found in the availability of primary care at the peripheries of md communities, in the dissemination of knowledge of disease prevention and health care, and in the induction of and guidance for active participation by the clientele in health maintenance at the personal, family and community level Abundant untapped health resources were identified that could be brough to bear upon the national effort to extend health services to every member of the Korean Population. Therefore, it was Postulated that the problem of underservice in rural communities of Korea can be structurcturally resolved by the effective mobilization and organization of untapped health resources, and that. a primary care Nursing Service System offers the best possibility for fulfillment of rural health service goals within the current health man-power situation. In order to identify appropriate strategies to combat the present difficulties in Korean rural health services and to utilize nurses and other health personnel in community-centered health programs, a search was made for examples of innovative service models throughout the world. An extensive literature survey and field visits to project sites both in Korea and in the United States were made. Experts in the field of world health, health service, planners, administrators, and medical and nursing practitioners in Korea, in the United States as well as visitors from other Asian countries were widely consulted. On the basis of information and inputs from these experts a new rural health service model has been constructed within the conceptual framework of community development, especially of the innovation diffusion Model. It is considered especially important that citizens in each community develop capacities for self-care with assistance and supports from available health professionals and participate in health service-related decisions that affect their own well-being. The proposed model is based upon the regionalization of health care planning utilizing a comprehensive Nursing Service System at the immediate delivery level The model features: (1) a health administration unit at each administrative level; (2) mechanisms for community participation; (3) a continuous source of primary health care at the local community level; (4) relative centralization of specialty care and provision of tertiary or super-specialty care only at major national metropolitan centers; and (5) a system for patient referral to the appropriate level of care. This model has been built around professional nurses as the key community health workers because their training is particularly suited and because large numbers of well-trained nurses are currently available and being trained. The special element in this model is a professional nurse-guided, self-care facilitating primary care Community Nursing Service System. This is supported by a Nursing Extension Service as a new training and support structure. (See attached diagrams). A broad spectrum of programs was proposed for the Community Nursing Service System. These were designed to establish a balance of activities between the clinic-centered individual care component and the field activity-centered educational and supportive component of health care services. Examples of possible program alternatives and proposed guidelines for health care in specific situations were presented, as well as the roles and functions of the key health personnel within the Community Nursing Service System. This Rural Health Service Model was proposed as a real alternative to the maldistributed, inequitable, uncoordinated solo-practice, physician-centered fee-for-service health care available to Koreans today.

• The Korean Journal of Zoology
• /
• v.15 no.1
• /
• pp.25-33
• /
• 1972

Two-Cell mouse embryos were incubated in the anterior chamber of the rat eye, which has been known as the best place among other animals' for the mouse ovum maturation, in order to observe the capability of their early development. Within 120 hours after incubation, 71.0% of two-cell embryos have developed to the blastocysts in the male rat eye, while only 38.5% in the eye of the same mouse as donated two-cell embryos. Thus, the rat eye chamber provides more favourable environment to the embryos than the mouse itself. The results are consistent with those of the previous studies comparing the maturation of the mouse follicular oocytes in the mouse and the rat eye chamber. Although the aqueous humor which is filled in the anterior chamber of the eye is characterized by its specific properties, being of higher osmolarity, higher concentrations of ascorbic acid, pyruvate and lactate, but lower of proteins and lower temperature than those in blood or lymph serum, The embryos are able to under-take their cleavage as normal as in vivo or in vitro. Concerning with a number of studies in vitro on the development of the mouse embryos which are requiring a very limited condition, the fact that they are able to manage their further development under very different enviroment from our knowledges would provide us a moment to understand their behavior during the early development. The difference of the proportion of the developed blastocysts between in the mouse eye chamber and in the rat can possibly be resulted from the species specific difference in the physicochemical properties between their eye chambers. This assumption is based upon the findings by many investigators who chmpared the nature of the eye chamber of various animals. As a consequence, the rat eye chamber might consist of better properties for the embryonal growth than the mouse eye chamber. The mouse embryos cleaved with a delayed period. In normal development they complete almost the cleavage within 94 hours after fertilization. However, in the present studies, 81.1% of two-cell embryos developed to the blastocysts and the morula in 120 hours in the eye chamber, assumed to be about 154 hours after fertilization. Such delay in development would be caused mainly by the low temperature of the eye chamber. At present we can make two assumptions to explain the capability of the emtryonal development in the eye chambers. One is that the embryos would possess an ability to adapt themselves to the environment which provides unfavourable conditions. The other is that the embryos might remain for a certain duration in the eye chamber, which is filled with a new body fluid produced immediately after the loss of the aqueous humor and the fluid of which becomes similar to blood serum in component. The first assumption is highly reliable since the embryonal cells are mostly at the undifferentiated state and so they probably engage a simple metabolism during their early period. The second assumption is induced by the fact that the rabbit eye chamber produces a plasmoid humor which has mostly similar components to blood serum after loss of aqueous humor through cornea by puncturing. However, the plasmoid humor is substituted by the initial aqueous humor in eight hours. Even though this finding, production of the new fluid, could be applied to the rat eye, it is hardly reliabel that the plasmoid humor remains for such a long period as 120 hours. Consequently, the development of the embryos is more likely due to their adaptability to the new environment during their early developmental stages.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.4
• /
• pp.57-67
• /
• 2014

The vigor condition of trees is an important indicator for the management of urban forested area. But difficulties in how to assess the tree vigor condition still remain. Previous efforts were limited in the 1) measurement of single indicator rather than using multiple indices, 2) purpose-oriented measurement such as for air-pollution effect or specific pathological symptom, and 3) ordinal-scale evaluations by field crews 4) despite human errors based on his/her experiences or prior knowledge. Therefore, this study attempted to develop a quantitative and objective methodology for assessing tree vigor condition, by measuring multiple modules and building the profile inventory. Furthermore, the possibility and limitations were discussed in terms of schematic frames describing tree vigor condition. The vigor condition of 56 flowering cherry plants in urban park were assessed by in-situ measurements of following eight items; growth of crown(Gc), growth of shoots, individual tree volume(Vol), plant area index, woody area index, leaf area index, leaf chlorophyll content(Lc) and leaf water content(Lw). For validation, these measurements were compared with the ranks of holistic tree vigor condition, which were visually assessed using a 4-point grading scale based on the expert's knowledge. As a result, the measures of each evaluation item successfully highlighted a variety of aspects in tree vigor condition, including the states of both photosynthetic and non-photosynthetic parts. The variation in the results depending on evaluated parts was shown within an individual tree, even though the broad agreement among the results was found. The result of correlation analysis between the tested measurements and 4-point visual assessment, demonstrated that the state of water-stressed foliage of the season (Lw) or the development of plant materials since sapling phase (Vol) could be better viewed from the outer appearance of trees than other symptoms. But only based on the visual assessment, it may be difficult to detect the quality of photosynthesis (Lc) or the recent trend in growth of trees (Gc). To make this methodology simplified for the broad-scale application, the tested eight measurements could be integrated into two components by principal component analysis, which was labelled with 'the amount of plant materials' and 'vigor trend', respectively. In addition, the use of these quantitative and multi-scale indicators underlies the importance of assessing various aspects of tree vigor condition, taking into account the response(s) on different time and spatial scale of pressure(s) shown in each evaluated module. Future study should be advanced for various species at diverse developing stages and environment, and the application to wide areas at a periodic manner.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.