• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.33-36
• /
• 2003

Time-dependent axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural element. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening are introduced. It could be concluded that the survey is a significant factor for the compensation of column shortening.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.1-7
• /
• 2014

This paper proposes a current harmonic compensation method for the grid-connected inverter, especially caused by the grid impedance. Grid impedance causes low order harmonics in the grid current and deteriorates power quality. This paper analyzes the negative impact of the grid impedance, and proposes an active feedforward compensation method. Proposing method verified through simulation and experiment with 3-phase 1.5kW voltage source inverter prototype.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1204-1210
• /
• 2016

The phase currents must be accurately measured to achieve the instantaneous torque control of AC motors. In general, those are measured using the current sensors. However, the measured current signals can include the offset errors and scaling errors by several components such as current sensors, analog amplifiers, noise filter circuits, and analog-to-digital converters. Therefore, the torque-controlled performance can be deteriorated by the current measurement errors. In this paper we have analyzed the influence caused by vector control of 2-phase induction motor when two errors are included in measured phase currents. Based on analyzed results, the compensation method is proposed without additional hardware. The proposed compensation method was applied vector-controlled inverter for 2-phase induction motor of 360[W] class and verified through computer simulations and experiments.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.137-144
• /
• 1998

In this paper we present our research dealing with the problem of tool deflection during the milling. We try to compensate the errors by considering a new tool trajectory. In order to determine the compensated tool trajectory, the problem is divided in three steps : cutting forces model, tool deflection model and trajectory compensation. Starting from experimental data, we determine a cutting forces model., which allows us to anticipate the tool deflection along one nominal path. In order to determine the compensated tool trajectory, we propose in this paper a method of path compensation, called “mirror method”. This method of tool path optimization allows to minimize errors due to tool deflection. Several examples are processed in simulations and validated experimentally.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.84-92
• /
• 1997

The purpose of this study is to develop a geometric error model and path compensation algorithm for rotating axes of the 5-axis machine tools, by a method to calibrate a rotary table using one master ball and three LVDTs. It was developed a new methodology to measure 3 translation errors of the rotary table and with a compensation procedure for setup errors of the master ball. The method is experimentally verified using a ball-table and on-machine inspection method. The results showed that the geometric error models with the path compensation strategy can be practically used as a means for improving the accuracy of the machine tools with rotary table.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.167-170
• /
• 2000

In this paper, we propose the edge compensation algorithm which connects the adjacent edges without losing the information of the skeletons on the edge image. The proposed edge compensation algorithm is composed of succeeding two steps. In the first step, the uplifted image is obtained by applying the uplifting process to the edge image. The next step is to extract the edge image from the uplifted image using the skeleton extraction algorithm. Experimental results show that the proposed method connects the adjacent edges without the distortion of the original edge information compared to the traditional method

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2278-2283
• /
• 2010

This paper deals with the pendubot control using disturbance observer. Experimental results for the motion of pendubot with balancing control show that the limit cycle can be attributed to the disturbance. Therefore, we propose the disturbance compensation method using by disturbance observer to compensate for the disturbance. Through the experimental results, the effectiveness of the proposed method is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.16-19
• /
• 1996

The objective of this paper is to present a new adaptive nonlinear compensation method, which is based upon the Pth-order inverse theory and can be implemented in a systematic way, for weakly nonlinear systems that can be modeled by a Volterra series. In particular, employment of the proposed approach for the linearization of a given nonlinear system leads to the effective elimination of (up to a required order) nonlinearities in the overall system output. To demonstrate the feasibility of the proposed method, simulation results using a satellite communication system model are also provided.

• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.9-16
• /
• 2014

본 논문에서는 이동객체의 위치인식 정확도 향상을 위하여 최소자승법을 적용한 이동객체 위치인식 보정 알고리즘을 제안하고, 성능을 분석하였다. 제안한 보정 알고리즘은 일정한 속도로 이동 중인 이동객체의 거리 값들을 TMVS (TWR Minimum Value Selection) 기법으로 측정 한 후, 이 값들을 사용하여 삼변측량법으로 이동객체의 위치를 측정하고, 최소자승법을 적용하여 위치인식 값을 보정한다. 실험결과, 시나리오 1 및 2에서 제안하는 보정알고리즘을 적용한 위치인식의 성능은 기존의 삼변측량법을 적16용한 위치인식의 성능에 비해 위치인식 정확도가 시나리오별 각각 58.84%, 40.28% 개선됨을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.174-175
• /
• 2002

We generate short optical pulses of ∼ 6 picoseconds at 10 GHz by chirped pulse compression based on phase modulation and chirp compensation. In the suggested method, sinusoidally driven intensity and phase modulators generate chirped pulses which are subsequently suppressed by chirp compensation using a single mode fiber.