• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.29-35
• /
• 1998

The purpose of this study is to analyze the elements forming interior design and to examine dimensional relationship among the elements which form space through the comparison of the spatial language and semiotics of space for the component of interior design. In addition to that it indtends to derive the principle of design which dominate interior design and the inherent diversified meaning by comparing those elements with the square of semiotic used in semiotics. Through this comparsion the meaning of constituent forming space which can be observed through the comparsion of square of semiotic has redefined flexbility among relational system of elements and this flexible concept make the scope of environment including human being broad and enriched. This study fist of all analyzes various phenomena of social culture review semiotics meta-learning and examines back theoretical ground of semiotics which is needed for space analysis. Second of all in the area of presenting an analysis tool for meaningful analysis this report introduces the square of semiotics which was invented,. A. J. Greimas in order to analyze the meaning of literary work and defind three categories of the progressive research method for the analysis of interior design and research itself. Finally as for the analysis of meaning for interior design this report sets the space and analyzed the space in accordance with the method and research procedure. being

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.365-369
• /
• 1993

In this paper, the new M/T method for motor speed detection is proposed. This method can be able to reduce the dead time compared with it when Ohmae's M/T method is implemented. And the comparsion of the dead time length between the Ohmae's method and the proposed method is analyzed quantitatively. Actually we implemented the new proposed M/T method using the hardware and software and verified the effectiveness of the proposed M/T method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1215-1222
• /
• 2005

The object of this thesis is an study on detailing for concrete reinforcement and analytical study for seismic behavior of underground reinforced concrete box structures using the established seismic analytical method. Using the established seismic analytical method that has been presented in various documents seismic behavior of buried reinforce concrete box structures is compared. From the comparsion, it is shown that feasibility and detailing detailng for concrete reinforcement and seismic method for seismic analysis of buried reinforced concrete box structures.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.75-81
• /
• 2002

Lipschitz stability and Lipschitz ø$_{o}$ - equistability of the functional differential equation x'= B(x)f(t, x, $x_{t}$), $x_{to}$ =$\theta$$_{o}$ are discussed. Sufficient conditions are given using the comparison with the corresponding scalar equation.ion.n.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.46-52
• /
• 1986

The transfer matrix method has been extensively used to analyze the vibration problem. The final stage in this method is to find out solutions which make the frequency determinant zero. However, the frequency determinant includes the exponential terms and it causes instability to calculation and increases error. Recently the frontal transfer matrix method was suggested by Okada to heighten stability and effectivity in calculation. This paper applied the frontal transfer method to both the beam and torsional system, and confirmed stability and effectivity in comparsion with the transfer matrix method and the Holzer method.

• 대한전기학회논문지
• /
• 제36권8호
• /
• pp.547-553
• /
• 1987

A new control method is proposed for PWM ac chopper whcih can have the features of both linear control of the fundamental voltage and complete elimination of the harmonics up to specified order. Through theoretical investigation of the proposed method, it is found that both input and output characteristics can be improved better than those of the conventional methods. Also the newly modified triangular carrier wave is suggested to perform the above features over full control range and to implement the control circuit easily. To evaluate the performances of the proposed PWM method, the comparsion with the conventional PWM technique is made and the exterimental results are suggested.

• 전기의세계
• /
• 제28권12호
• /
• pp.27-32
• /
• 1979

13명의 환자에 있어서 새로운 비관혈적 방법에 의한 심박출량을 계산하고, 열희석에 의한 방법으로 측정한 심박출량과 비교하였다. 본 논문에서 사용한 비관혈적 펄스 전달 방법은 대동맥 모델에서의 최적 매개변수 방법을 사용하였다. 모델의 최적 매개변수는 맥압의 첫번째 고주파 전달함수에서 측정치와 계산치의 차이를 최소화하는 조건에 의하여 계산하였다. 전달함수의 2개의 펄스는 각각 경동맥동과 대퇴동맥에서 Piezo-resistive Pulse Microphone을 사용하여 측정하였고, 대동맥의 직경은 초음파 방법을 사용하여 측정하였다. 13명의 환자에게서 16가지 측정을 해서 열희석과 비관혈적 방법은 0.89의 상관계수를 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.64-67
• /
• 1988

This paper proposes a algorithm to obtain a time-varing system parameters for the optimal controller. The proposed algorithm is enlarged from tile optimal sorting algorithm. It applies to Bang-Bang control and compares with CGD Method. We confirm that the proposed algorithm is excellent.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.371-379
• /
• 1990

The decoupling problem has a great practical importance in that it simplifies greatly the control of a given system by reducing the multi-input multi-output systems. In this paper, we derive the necessary and sufficient conditions for decoupling 2-D F-MM II via state feedback. For the general case, the problem of determining the feedback matrix F involves the solution of nonlinear algebraic equations. Under certain conditions, however, it is shown that an explicit formula for F may be derived. In comparsion with the method for FM, it appears that this method for F-MM II is more general and the algorithm is simpler.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.215-218
• /
• 1995

This paper presents an experimental study on the strength and deformation of concrete-filled circular steel short columns. Six specimens of concrete-filled circular short columns were tested under concentric compressive load. For comparsion, three specimens of circular steel short columns were also loaded to failure. The ultimate strength, ductility, and confinement mechanism of columns were compared. In the comparison, the effect of witch-thickness ratio and concrete compressive strength on the behavior of colimns were examed. As a result, the axial load verse axial average strain relationship of concrete-filled circular steel columns was very stable, because of interactions between the concrete and steel, the strength are 13% and 30% larger than the strength extimated by simply superimposed method of the concrete and steel. The ratio of the circumferential to longitudinal strain increment, both measured on the steel suface, was 0.28 up to the longitudinal strain of 0.1%, increases from 0.3 to 0.8 between the strain of 0.1% to 0.3%, and 0.8 beyond the strain of 0.3%