• Journal of Educational Research in Mathematics
• /
• v.26 no.4
• /
• pp.663-682
• /
• 2016

This study conducted an analysis of strategies that the 3rd to 6th grade elementary students used when they were solving problems of comparing the size of the fractions with like and unlike denominators, and unit fractions. Although there were slight differences in the students' use of strategies according to the problem types, students were found to use the 'part-whole strategy', 'transforming strategy', and 'between fractions strategy' frequently. But 'pieces strategy', 'unit fraction strategy', 'within fraction strategy', and 'equivalent fraction strategy' were not used frequently. In regard to the strategy use that is appropriate to the problem condition, it was found that students needed to use the 'unit fraction strategy', and the 'within fraction strategy', whereas there were many errors in their use of the 'between fractions strategy'. Based on the results, the study attempted to provide pedagogical implications in teaching and learning for comparing the size of the fractions.

• Journal of Elementary Mathematics Education in Korea
• /
• v.12 no.1
• /
• pp.59-78
• /
• 2008

The purpose of this study was to research and analyze students' informal knowledge before they learned formal knowledge about fraction concepts and to see how to apply this informal knowledge to teach fraction concepts. According to this purpose, research questions were follows. 1) What is the students' informal knowledge about dividing into equal parts, the equivalent fraction, and comparing size of fractions among important and primary concepts of fraction? 2) What are the contents to can lead bad concepts among students' informal knowledge? 3) How will students' informal knowledge be used when teachers give lessons in fraction concepts? To perform this study, I asked interview questions that constructed a form of drawing expression, a form of story telling, and a form of activity with figure. The interview questions included questions related to dividing into equal parts, the equivalent fraction, and comparing size of fractions. The conclusions are as follows: First, when students before they learned formal knowledge about fraction concepts solve the problem, they use the informal knowledge. And a form of informal knowledge is vary various. Second, among students' informal knowledge related to important and primary concepts of fraction, there are contents to lead bad concepts. Third, it is necessary to use students' various informal knowledge to instruct fraction concepts so that students can understand clearly about fraction concepts.

• Research in Mathematical Education
• /
• v.17 no.1
• /
• pp.47-61
• /
• 2013

This paper aims to explore whether Learning Study improves teachers' subject content knowledge, pedagogical content knowledge, and attitude toward teaching mathematics. A Learning Study was conducted in a Hong Kong primary school for a research lesson on comparing the size of fractions to explore the new teacher roles.

• Education of Primary School Mathematics
• /
• v.25 no.3
• /
• pp.213-232
• /
• 2022

With the importance of number line in learning fractions, this study investigated how 4th grade students understand fractions and its operations in number line. The questionnaire consisted 22 items which were related to representing fractions, comparing the size of fractions, and operating addition and subtraction of fractions. Both structured number line and sub-structured number line were presented in the items. As results of the study, the overall success rates were not high and even some items showed higher incorrect answer rates than the success rates. Also, the students showed a difficulty in solving non-structured number line tasks. It was also noticeable that students showed several types of incorrect answers, which means that students had incomplete understanding of both fractions and number line. This paper is expected to shed light on elementary students' understanding of fractions and number line and to provide implications of how to deal with number line in teaching and learning fractions in the elementary school.

• Preventive Nutrition and Food Science
• /
• v.4 no.2
• /
• pp.145-151
• /
• 1999

Apolipoprotein B-100 (apo B-100) is an important component in plasma low density lipoproteins (LDL). It function as the ligand for the LDL receptor in peripheral cells. The LDLs are removed from the circulation by both high-affinity receptor-mediated and receptor-independant pathways. LDLs are heterogeneous in their lipid content, size and density and certain LDL subspecies increase risk of atherosclerosis due to differences in the conformation of apo B in the particle. In the present study , surface and core peptide fraction of Apo B-100 have been characterized by comparing peptide-mapping and fluorescence spectroscopy. Surface fragments of apo B-100 were generated by digestion of LDL with either trypsin , pronase, or pancreatin elastase. Surface fractions were fractionated on a Sephadex G-50 column. The remaining core fragments were delipidated and redigested with the above enzymes, and the resulting core peptides were compared with surface peptides. Results from peptide-mapping by HPLC showed pronase-digestion was more extensive than trypsin -digestion to remove surface peptide fraction from LDL. Fluorescence spectra showed that core fractions contained higher amount of tryptophan than surface fractions, and it indicated that core fraction wa smore hydrophobic than surface fractions. A comparison of the behavior of the core and surface provided informations about the regions of apo B-100 involved in LDL metabolism and also about the structural features concerning the formation of atherosclerosis.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.480-486
• /
• 2005

The main goals of this work are to investigate the effect of molecular weight distribution(MWD) and activated carbon adsorption capacity after conventional coagulation and enhanced coagulation. The ozonation was very effective to decompose the NOM to smaller size and to remove molecular smaller than 1,000. The concentration of DOC was reduced 0.25mg/L and 0.56mg/L by the conventional coagulation and the enhanced coagulation, respectively The conventional coagulation was not effective to remove NOM. However, the enhanced coagulation was effective to remove MW bigger than 10,000. The higher MW was shifted to smaller weight by ozonation in the raw water and the after conventional coagulation. After enhanced coagulation the MW had not changed significantly by ozonation. Also, it was observed that the ozone dosage did not have significant impact on MW shifting to smaller size. The adsorption capacity simulated by IAST comparing K values showed that the adsorption capacity was not impacted by ozone doses. There was very strong correlation between MW smaller than 10,000 and the mid- and strongly adsorbable fractions.

• Journal of Powder Materials
• /
• v.9 no.1
• /
• pp.19-24
• /
• 2002

This paper reports the results of an investigation into the effect of Cu additions upon the nano-crystallization behaviour of an Al-Y-Ni alloy. 1 at.% Cu was added to a base alloy of Al/sub 88/Y₄Ni/sub 8/ either by substitution for Al to form Al/sub 87/Y₄Ni/sub 8/Cu₁, or by substitution for Ni to form Al/sub 88/Y₄Ni/sub 7/Cu₁. Consistent with previous findings in the literature, the substitution of Cu for Al was found to increase the thermal stability of the amorphous phase whereas the substitution of Cu for Ni was found to decrease its thermal stability. Comparing the microstructures of these alloys after heat treatment to produce equivalent volume fractions of Al nanocrystals showed average grain sizes of 14 nm, 12 nm and 9 nm for the alloys Al/sub 88/Y₄Ni/sub 8/, Al/sub 87/Y₄Ni/sub 8/Cu₁respectively. The effect of Cu in refining the size of the nanocrystals was attributed to enhanced nucleation increasing the number density of the nanocrystals, rather than diffusion limited or interface limited growth.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.1
• /
• pp.10-15
• /
• 2003

In Nb, V and Ti added steels, carbo-nitrides are formed due to their strong interaction with C and N. The formation of carbo-nitrides has an important role to control the microstructure as well as mechanical properties by grain size refinement and precipitation hardening. However, the quantitative analysis of distribution of precipitates and the effect of precipitates on the phase transformation and mechanical properties are still far from satisfactory. In this study, the quantitative analysis of precipitates in austenite was investigated using the fact that the formation of precipitates in Nb, V and Ti added steels accelerates austenite/ferrite transformation. The formation of precipitates was controlled by adjusting holding temperature and time in austenite region, transformed Volume fractions were measured by dilatometer during slow cooling, Iso-precipitation kinetics were determined by comparing 5% and 50% volumes transformed at various conditions respectively. The result was compared with the calculated.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.281-287
• /
• 2012

Aerosol concentrations at the CC-Lag site in the Teshio Experimental Forest increased from winter to spring and sometimes showed extremely high values associated with Kosa and/or forest-fire events. The range and mean of the mass concentrations of aerosol chemical species were as follows: total particulate mass, 1.2-29, 5.0; elemental carbon, 0.061-2.2, 0.43; organic carbon, 0.059-3.5, 0.79; and sulfate, 0.12-6.2, 1.8 ${\mu}g/m^3$. The total masses of the deposited particles on hybrid larch and on bamboo leaves were approximately 35 and 30 ${\mu}g/cm^2$, respectively. The amounts of soil particles on the leaves were 6 ${\mu}g/cm^2$ for the upper part of hybrid larch, 2 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 1 ${\mu}g/cm^2$ for Sasa bamboo leaves. The amounts of deposited black carbon were 2.3 ${\mu}g/cm^2$ for the upper part of hybrid larch, 0.6 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 0.2 ${\mu}g/cm^2$ for Sasa bamboo leaves. Half of the total deposited particular mass was attached on the hybrid larch; however, most of the total deposited mass was adhered on the Sasa bamboo leaves. Regardless of the species, there tend to be more deposited particles on the leaves in the upper part than in the lower part, with only a few meters height difference. Comparing the composition of the deposited particles to that of the atmospheric aerosols without any size cut, the fractions of water-soluble material sulfate and sea salt in the deposited aerosols were about one tenth and one hundredth lower than that in the aerosols, respectively. On the basis of the measured concentration and the deposited amount on leaves, the deposition velocity of black carbon was estimated to be approximately 0.5 cm/s.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.129-138
• /
• 2008

The characteristics of beneficiating kaolin mineral by liberation (selective grinding) and air classification have been investigated, comparing the grinding rates of ball mill and impact mill. The ore was ground using a ball mill and a impact mill to evaluate the grindability of the two grinding methods based on the constant production amount of fine particles in size less than 325 mesh. Then, the fine product was further separated into two fractions using an air-classifier and each fraction was chemically analyzed to compare the beneficiation efficiency of the two grinding methods. The chemical grade of kaolin mineral decreased as increasing the grinding rate of both the mills. particularly in the case of ball mill because of overgrinding impurities such as quartz and feldspar. In the case of the ball milling, the fine fraction less than 325 mesh was air-classified at a cutting point of $43\;{\mu}m$. The production rate of the air-classified concentrate was found to be 66.2 wt%, removing 5.3% of $Fe_2O_3$ and 34.6% of CaO. Under the same conditions mentioned above with the impact mill, the production rate of the air-classified concentrate was 64.4 wt%, removing 34.2% of $Fe_2O_3$, 67.6% of CaO and 25.0% of $TiO_2$. Therefore, our results indicate that impact mill is superior to ball mill in terms of impurity removal.