• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.837-845
• /
• 2016

Providing a customer with tailored location-based services (LBSs) is a fundamental problem. For location-estimation techniques with radio-based measurements, LBS applications are widely available for mobile devices (MDs), such as smartphones, enabling users to run multi-task applications. LBS information not only enables obtaining the current location of an MD but also provides real-time push-pull communication service. For indoor environments, localization technologies based on radio frequency (RF) pattern-matching approaches are accurate and commonly used. However, to survey radio information for pattern-matching approaches, a considerable amount of time and work is spent in indoor environments. Consequently, in order to reduce the system-deployment cost and computing complexity, this article proposes an indoor positioning approach, which involves using Asus Xtion to facilitate capturing RF signals during an offline site survey. The depth information obtained using Asus Xtion is utilized to estimate the locations and predict the received signal strength (RF information) at uncertain locations. The proposed approach effectively reduces not only the time and work costs but also the computing complexity involved in determining the orientation and RF during the online positioning phase by estimating the user's location by using a smartphone. The experimental results demonstrated that more than 78% of time was saved, and the number of samples acquired using the proposed method during the offline phase was twice as much as that acquired using the conventional method. For the online phase, the location estimates have error distances of less than 2.67 m. Therefore, the proposed approach is beneficial for use in various LBS applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4341-4348
• /
• 2012

This paper presents a web-based real-time monitoring system for a photobioreactor using an WiFi wireless network. An WiFi interface can support high speed data transfer, up to 11Mbps and it can be compatible with commercial wireless LAN environment. Thus, the proposed cell culture based on WiFi network can be easily applied to the reconfigurable system and real-time monitoring system. In this paper, we integrate the commercial WiFi module to the various bio-sensors and sensor control board to configure the wireless network. After we evaluate application S/W for monitoring the environment within incubator, we verify the proposed sensor networks for a cell culture system and its monitoring system. This result can be applicable for various bio-applications that require the network configuration and real-time monitoring system.

• Korean Institute of Interior Design Journal
• /
• v.24 no.4
• /
• pp.80-90
• /
• 2015

This study aims to improve plans by analyzing spatial compositions of cohousing common houses, their role depending on the types of users and spaces, and satisfaction from the user-oriented design perspective. For this study, a basic concept was examined based on previous studies and literature reviews. So-Haeng-Ju(Happy House with Communication) Houses 1, 2, and 3 in Seongmisan Village was analyzed. As well, interviews with residents of these houses were conducted to analyze the role of user behavior in common house depending on the types of users and spaces. As a result, it was found that there were common characteristics of roles in an exchange with neighbors, cooperative child-care, and residents' meetings. The time and behavioral types were different depending on the living patterns, characteristics, and family members of residents. User satisfaction with the locations of community facilities including communal kitchen and communal living room, the composition of rooms, communication with residents, and the connection between communal living space and personal living space, was above the average. However, user satisfaction with storage facilities, or defect repair and facility maintenance was low. Most of cohousing common house users were satisfied with the use and size of spaces, and a sense of community, including communication with neighbors beyond the environment and Seongmisan Village. In conclusion, a realistic alternative is required for future cohousing by developing a system regarding human resources networks and cost bearing issues.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.418-425
• /
• 1998

Stereo cameras are the most widely used sensing systems for automated machines including robots to interact with their three-dimensional(3D) working environments. The position of a target point in the 3D world coordinates can be measured by the use of stereo cameras and the camera calibration is an important preliminary step for the task. Existing camera calibration techniques can be classified into two large categories - linear and nonlinear techniques. While linear techniques are simple but somewhat inaccurate, the nonlinear ones require a modeling process to compensate for the lens distortion and a rather complicated procedure to solve the nonlinear equations. In this paper, a method employing a neural network for the calibration problem is described for tackling the problems arisen when existing techniques are applied and the results are reported. Particularly, it is shown experimentally that by utilizing the function approximation capability of multi-layer neural networks trained by the back-propagation(BP) algorithm to learn the error pattern of a linear technique, the measurement accuracy can be simply and efficiently increased.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1533-1546
• /
• 2013

Wireless multicast is considered as an effective transmission mode for the future mobile social contact services supported by Long Time Evolution (LTE). Though wireless multicast has an excellent resource efficiency, its performance suffers deterioration from the channel condition and wireless resource availability. Cognitive Radio (CR) and Device to Device (D2D) are two solutions to provide potential resource. However, resource allocation for cognitive wireless multicast based on D2D is still a great challenge for LTE social networks. In this paper, a joint sub-carriers and power allocation model based on D2D for general cognitive radio multicast (CR-D2D-MC) is proposed for Orthogonal Frequency-Division Multiplexing (OFDM) LTE systems. By opportunistically accessing the licensed spectrum, the maximized capacity for multiple cognitive multicast groups is achieved with the condition of the general scenario of imperfect spectrum sensing, the constrains of interference to primary users (PUs) and an upper-bound power of secondary users (SUs) acting as multicast source nodes. Furthermore, the fairness for multicast groups or unicast terminals is guaranteed by setting a lower-bound number of the subcarriers allocated to cognitive multicast groups. Lagrange duality algorithm is adopted to obtain the optimal solution to the proposed CR-D2D-MC model. The simulation results show that the proposed algorithm improves the performance of cognitive multicast groups and achieves a good balance between capacity and fairness.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.257-271
• /
• 2009

In this paper, we propose a protocol compression scheme for enhancing the performance of call processing of PTT(Push-to-Talk) which is one of the important services in IMS(IP Multimedia Subsystem), a next generation integrated wired/wireless packet communication network. To service the PTT on an IMS network, it should use the same call setup procedure as legacy Mobile and TRS(Trunked Radio System) networks and have a fast call setup time and enough communication bandwidth because a number of terminals should be able to exchange same data in real time. The proposed A+SigComp scheme reduces the initial call setup delay of SIP by about 10%, which is used by PTT service for call setup. In addition, the A+ROHC scheme is proposed to compress the header of RTP packets transferred during PTT voice transmission and, as a result, about 5% of increase in communication efficiency is observed.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.137-146
• /
• 2006

Because the traditional public key-based cryptosystems are unsuitable for the sensor node with limited computational and communication capability, a secure communication between two neighbor sensor nodes becomes an important challenging research in sensor network security. Therefore several session key establishment protocols have been proposed for that purpose. In this paper, we analyzed and compared the existing session key establishment protocols based on the criterions of generation strategy and uniqueness of the session key, connectivity, overhead of communication and computation, and vulnerability to attacks. Based on the analysis results, we specify the requirements for the secure and efficient protocols for establishing session keys. Then, we propose an advanced protocol to satisfy the specified requirements and verify the superiority of our protocol over the existing protocols through the detailed analysis.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.11-19
• /
• 2009

Multicarrier direct sequence code division multiple access (MC DS-CDMA) is an attractive technique for achieving high data rate transmission. This is valid regardless of whether or not the potentially large peak-to-average power ratio (PAPR) is an important factor for its application. On the other hand, code select CDMA (CS-CDMA) is an attractive technique with constant amplitude transmission of multicode signal regardless of subchannels. This is achieved by introducing a code select method. In this paper, we propose a new multiple access scheme based on the combination of MC DS-CDMA and CS-CDMA. The proposed scheme, which we call MC CS-CDMA, includes as special cases the subclasses of MC DS-CDMA and CS-CDMA. This paper investigates the performance of these systems over a multipath frequency selective fading channel using a RAKE receiver with maximal ratio combiner. In addition, the PAPR of the proposed system is compared with that of both MC DS-CDMA and CS-CDMA. Simulation results demonstrate that the proposed system provides better PAPR reduction than MC DS-CDMA, at the expense of the complexity of the receiver and the number of available users. The numerical result demonstrates that the proposed system has better performance than MC DS-CDMA due to the increased processing gain and time diversity gain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.99-114
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) has received considerable attention between telecommunications and the Internet communities and does not require active participation of the Mobile Node (MN) by way of network-based mobility management. The PMIPv6 domain is studying establishment in progress to support extensively a number of MN by using a low handover latency. In this research, we are propose a novel 3S scheme for building Scalable and Secure and Seamless PMIPv6 domains. In the proposed scheme, all of Mobility Access Gateway (MAG) are acting as the Local Mobility Anchor (LMA) and composing a virtual ring with another MAG. General hashing is used in the efficient distribution-mapping between each MN and the MN's LMA of all MAGs. And, MAG and MN are authenticated using the symmetric key. Through mathematical analysis, we verifies the safety, scalability, and seamless service for 3S. Also, we're propose a handover procedure of 3S and show better than the existing schemes in terms of handover latency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.1-16
• /
• 2013

Smartphones and tablets including phone, calendar are the necessities of modern man. They are one of the MN(Mobile Node), each with wireless network capabilities. Necessities of modern human MNs are almost included cellular module available in LTE/3G and Wi-Fi module for high-speed Internet. Until now, MN mobility management is handled, but using network-based mobility management in this paper. Then, carriers can manage and maintain the network for low-cost. In addition, it was considered that use a lot of modern people with Wi-Fi and LTE/3G, and using Cross-Layer-Based handoff.