• Journal of Chest Surgery
• /
• v.26 no.5
• /
• pp.365-372
• /
• 1993

We analyzed the patients who were admitted to Surgical Intensive Care Unit[SICU] of Kyungpook National University Hospital from January 1987 through December 1991. The results were as followings: The total number of patients for 5 years was 2446 and 1553[63.5%] were male,893[36.5%] were female. The average age was 34.1 years old and the greatest age group was the 1-9 age group.The number of the patients in the Department of Thoracic and Cardiovascular Surgery, which was the highest among all departments,was 1608 [65.7%].Congenital Heart disease was the most common among all diseases.The patients who had undergone any kinds of operations were 89.9% of all patients.The averge stay in SICU was 5.2 days.The overall mortality rate was 12.1% ,which included hopelessly discharged patients and the highest mortality rate occurred in the patients over 80 years old.The highest cause of death was cardiac problem[30.4%]. The next was sepsis.The proportion of patients who had received a mechanical ventilatory support was 35.7% and 52% of those patients belonged to the department of thoracic and cardiovascular surgery.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.375-382
• /
• 2022

This paper proposes a multi-core cooperative computing structure considering the heterogeneous features of automotive embedded on-chip software. The automotive embedded software has the heterogeneous execution flow properties for various hardware drives. Software developed with a homogeneous execution flow without considering these properties will incur inefficient overhead due to core latency and load. The proposed method was evaluated on an target board on which a automotive MCU (micro-controller unit) with built-in multi-cores was mounted. We demonstrate an overhead reduction when software including common embedded system tasks, such as ADC sampling, DSP operations, and communication interfaces, are implemented in a heterogeneous execution flow. When we used the proposed method, embedded software was able to take advantage of idle states that occur between heterogeneous tasks to make efficient use of the resources on the board. As a result of the experiments, the power consumption of the board decreased by 42.11% compared to the baseline. Furthermore, the time required to process the same amount of sampling data was reduced by 27.09%. Experimental results validate the efficiency of the proposed multi-core cooperative heterogeneous embedded software execution technique.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.403-405
• /
• 2000

This paper describes a single transistor type ferroelectric field effect transistor (1Tr FeFET) memory cell scheme, which select one unit memory cell and program/read it. The well voltage can be controlled by isolating the common row well lines. Through applying bias voltage to Gate and Well, respectively, we implement If FeFET memory cell scheme in which interference problem is not generated and the selection of each memory cell is possible. The results of HSPICE simulations showed the successful operations of the proposed cell scheme.

• Language and Information
• /
• v.18 no.2
• /
• pp.1-29
• /
• 2014

Relativization is one of the common syntactic operations to merge two different clauses into a single information unit. This operation plays a pivotal role to structuralize multiple clauses cohesively as well as serves to specify the property an individual has within the context. That implies that relativization contributes to information structure of multiclausal sentences. In this context, this paper delves into information structure of relative clauses in English with an eye toward creation of a computational model from a standpoint of machine translation. The current work employs Head-driven Phrase Structure Grammar (HPSG, Pollard and Sag (1994)) as a theory of grammar and Minimal Recursion Semantics (MRS, Copestake et al. (2005) as a meaning representation system. Building upon these formalisms, this paper addresses how information structure of relative clauses can be represented and constrained. The current work makes use of Individual CONStraints (ICONS) for modeling relative clauses with respect to information structure. The current work also investigates which relative clause involves which information structure constraint. The present study argues that non-restrictive relative clauses impose a more specific constraint on information structure than restrictive relative clauses.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.397-405
• /
• 1995

In order to operate the automatic devices of manufacturing process more efficiently and to solve the needs of the resource sharing,network technology is applied to the unit control devices located in common manufacturing zone and operated by connecting them.In this paper,functional standard of the network operation layer is set as MAP standard application layer of MMS(manufacturing message standard)for the cell or group,which is suggested by CIM (computer integrated manufacturing) standardization as common manufacturing zone.MMS is composed of abstract message which is not consider specific devices.Then,specific message standard must be defined to operate MMS.It is designed as VMD (virtual manufacturing device)objects which are abstract objects to perform group management based on the companion standard.Also they are operated in the group management model system.Group management operation takes multicast communication method which is the communication from single source to the multiple sinks, and the group management system and unit control devices are performed as VMD and real device mapping.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.85-92
• /
• 1969

The goal for the improvement of rice culture in our country is to increase the rice yield per unit area, and that thoroughly, to equalize the rice yield per unit are highly by adaptation of high technique, while on the side of the efficiency, to increase the productivity of the labour through the cooperative work. And then, the theory for execution of the cooperative rice culture which is the productive system embodying the goal above and the expected effects as well as the future prospect for the development of the cooperative rice culture must be studied and defined. The results studied up to now are summarized as follows: 1. The cooperative rice culture is one of the most effective ways to execute highly efficient farm management and to supply the technical details on the cultivation for equalized high yield per unit area in the rice cultivating districts. 2. For the most effective accomplishment of the cooperative rice culture, the water control, and soil and variety of rice must be investigated in advance an then the basic technical details for the rice culture must be defined. 3. The rice cultivation calender is drawn up with the main technical details of rice culture by the mutual agreement of all farmers belong to the cooperative farm. All technical details for the rice cultivation in the cooperative farm are standardized by the rice cultivation calendar and the main technical operations should be worked together and the other operations executed individually. 4. The technique for rice cultivation, which was difficult to be introduced in the individual farm management, could be introduced easily to the cooperative rice culture, and the rice yield of the cooperative farm was increased 23.3% compared to that of common farm in 1968. 5. At present, the type of the cooperative rice culture is a primary type of the agreement for farm management, rarely including the associated operation type and the contracted operation type for a part of operation, However, for stabilized high yield through the mechanization of the cultivation system, the cooperative farm must be developed for a course promoting the associated operation type including the technique trust type and the contracted operation type according to the condition of location.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.185-192
• /
• 1995

A common control model used to implement computer integrated manufacturing(CIM) is based on the hierarchical decomposition of the shop floor activities, in which supervisory controllers are responsible for all the interactions among subordinates. Although the hierarchical control philosophy provides for easy understanding of complex systems, an emerging manufacturing paradigm, agile manufacturing, requires a new control structure necessary to accommodate the rapid development of a shop floor controller. This is what is called CSCW(computer supported cooperative work)-based control or component-based heterarchical control. As computing resources and communication network on the shop floor become increasingly intelligent and powerful, the new control architecture is about to come true in a modern CIM system. In this paper, CSCW-based control is adopted and investigated, in which a controller for a unit of device performs 3 main functions - planning, scheduling and execution. In this paper, attention is paid to a planning function and all the detailed planning activities for CSCW-based shop floor control are identified. Interactions with other functions are also addressed. Generally speaking, planning determines tasks to be scheduled in the future. In other words, planning analyzes process plans and transforms process plans into detailed plans adequate for shop floor control. Planning is also responsible for updating the process plan and identifying/resolving replanning activities whether they come from scheduling or execution.

• Journal of Chest Surgery
• /
• v.24 no.3
• /
• pp.310-321
• /
• 1991

Between April 1986 and September 1990, 34 patients with a single or dominant right ventricle underwent modified Fontan procedure for definite palliation in Seoul National University Children`s Hospital. Their age at operation ranged from 8 months to 14 years [Mean 5.5 years]. The ventricular chamber was solitary and of indeterminate trabecular pattern in 6 patients. 28 patients had posteriorly located rudimentary chamber, all of which were trabecular pouches having no communication with outlet septum. The patterns of atrioventricular connection were common inlet[9], double inlet [11], left atrioventricular valve atresia [12] and right atrioventricular valve atresia with L-loop [2]. Pulmonary outflow tracts were atretic in 7 patients and stenotic in 26 patients. Major associated anomalies included anomalous systemic venous drainage [15], dextrocardia [12] and total anomalous pulmonary venous connection[3]. Shunt operations were previously performed in 13 patients and pulmonary artery banding and atrial septectomy in 1 patients. Surgery included intraatrial baffling in 26 patients, bidirectional cavopulmonary shunt in 13 patients, atrioventricular valve obliteration in 3 patients and atrioventricular valve replacement in 3 patients. Central venous pressure measured postoperatively at intensive care unit ranged from 18cm H2O to 28cm H2O [mean 23.2cm H2O]. Hospital mortality was 35.3% [12/34], all died out of low output syndrome. Suspected causes of low output syndrome include ventricular dysfunction [8], hypoplastic or tortuous pulmonary artery [2] and elevated pulmonary vascular resistance [2]. 19 patients had 31 major complications including low output syndrome [18], arrhythmia [4], acute renal failure [3] and respiratory failure [3]. Mortality rate was significantly higher in the groups receiving intraatrial baffling and AV valve replacement respectively [p<0.05]. 20 patients were followed up postoperatively with the mean follow-up period 15.0$\pm$11.6 months. There were no late death and follow-up catheterization was performed in 10 patients. Mean right atrial pressure was 15.4$\pm$6.8mmHg and ventricular contraction was reasonable in all but one case. Thus, Fontan principle can be applied successfully to all the patients with complex cardiac anomaly of single ventricle variety and better results can be anticipated with judicious selection of patient and improvement of postoperative care.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.1
• /
• pp.9-17
• /
• 2005

Nanotechnology has penetrated into the various branches of research and development and it is particularly of benefit to the particle size engineering. It has been widely known that the particle size of an active pharmaceutical ingredient (API) is critical in determining the bioavailability and processability of pharmaceutical formulation. However, the window of appropriate particle size has been limited mainly due to related processing difficulties. The windows have been widened by the recent development of nanotechnologies, resulting in diversified drug delivery systems. The impact of this development is far more fundamental than what can be expected from conventional particle size engineering. It is the case that the preparation and use of nanoparticles will soon be a common task in the particle engineering step of pharmaceutical unit operations. In this chapter, the basic principles of variouspreparation techniques will be discussed in detail. Regardless of processing details, the preparation methods of pharmaceutical nanoparticles mainly concern how to deal with the extra energy related with particle size. Depending on the ways of treating the e103 energy, preparation methods can be classified into two major classes, i.e.. thermodynamic and kinetic approaches. The recent progresses have shown the possibilities of much more complex combinations of different approaches and the use of new types of energy and nanostructures.

• Quality Improvement in Health Care
• /
• v.10 no.1
• /
• pp.28-41
• /
• 2003

Background : Because unplanned readmissions to intensive care unit(ICU)might be related with undesirable patient outcomes, we investigated the pattern of and reason for unplanned ICU readmission to provide baseline data for reducing unplanned returns to ICU. Methods : The subjects included all patients who readmitted to ICU during the same hospitalization at a tertiary referral hospital between January 1st and June 30th 2002. Quality improvement(QI) nurse collected the data through medical records and a medical director reviewed the data collected. Results : 1) The average unplanned ICU readmission rate was 5.6%(gastroenterology 14.6%, pediatrics 12.7%, pulmonology 11.9%, neurosurgery 6.3%, general surgery 5.3%, chest surgery 3.9%, and cardiology 3.3%). 2) Among the unplanned readmissions, more than 50% of cases were from patients older than 60 years, and the main categories of diagnose at hospital admission were neurologic disease(29.9%) and cardiovascular disease(27.6%). 3) Of unplanned ICU readmissions, 41.8% had recurrence of the initial problems, 44.8% had occurrence of new problems. And 9.7% required post-operative care after unplanned operations. 4) The most common cause responsible for unplanned ICU readmission were respiratory problem(38.3%) and cardiovascular problem(14.3%). 5) About 40% of unplanned ICU readmission occurred within 3 days after ICU discharge. 6) Average length of stay of the readmitted patients to ICUs were much longer than that of non-readmitted patients. 7) Hospital mortality rate was much higher for unplanned ICU readmitted patients(23.6%) than for non-readmitted patients(1.5%) (P<0.001). Conclusions : This study showed that the unplanned ICU readmitted patients had poor outcomes(high morality and increased length of stay). In addition study results suggest that more attention should be paid to patients in ICU with poor respiratory function or elderly patients, and careful clinical decisions are required at discharged from ICU to general ward.