• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.75-80
• /
• 2019

Sales of the Korean clothing industry grew to 16.9 percent on-year in 2010, but the growth rate dropped to 3 percent from 2011 to 2016 and the overall market began to slump to 1.1.6 percent in 2017. The competitiveness of clothing companies is also a major sector in logistics capability, and the average logistics cost of domestic clothing companies is 8.3 percent of sales in 2011, higher than the average 8 percent of domestic industries, and 36.4 percent of the total storage cost in 2011, higher than the 28.8 percent share of the total storage cost of domestic companies. As domestic production conditions such as wage hikes and labor disputes worsened in the 1990s, production facilities were rapidly moved overseas, which led many clothing companies to have no production facilities or a minimal production base in Korea and focus on marketing and design capabilities. The total storage capacity and storage efficiency of the logistics center became very important as the products were changed to the form of mass warehousing and small-volume forwarding. Research shows that building column spacing, a model of this research, can affect the amount of hanger rack storage empirically, so for sustainable growth of clothing companies, it is necessary to improve competitiveness in the logistics market by reducing costs and improving efficiency to overcome difficulties in corporate management. Because logistics costs are 8.3 percent and operating profit to sales ratio is 2 percent, it is expected that operating profit will increase by 41.5 percent if logistics costs are reduced by 10 percent. If 10% of storage cost is saved based on storage cost, operating profit is expected to increase by 15% To strengthen the competitiveness of the clothing industry, a reduction in logistics costs is essential. Therefore, the purpose of this study is to provide hints that logistics experts can have empirically small amounts in reducing storage costs through column spacing adjustment of logistics centers that have not been dealt with statistically until now, and to contribute to the continued growth of clothing companies and the development of the domestic logistics industry.

• 한국식품과학회지
• /
• 제32권3호
• /
• pp.513-518
• /
• 2000

당귀의 정유물을 Nickerson 동시 중류 추출법으로 추출하여, 저장온도와 기간에 따른 정유량의 변화를 비교하였고, 저장 60일째의 각 시료의 휘발성 성분을 GC 및 GC-MS법으로 분석, 동정하였다. 당귀의 정유함량을 비교한 결과 저장 10일째는 저온저장$(1{\sim}5^{\circ}C)$과 상온저장한 당귀는 저장직전에 분석한 당귀의 정유량과 거의 차이가 없었으나 20일 이후에는 저온저장한 당귀 시료의 정유량이 상온저장한 당귀의 정유량보다 함량이 많았다. 상온저장한 시료는 저장기간이 길어짐에 따라 정유량의 중가가 완만하다가 60일에는 정유량이 증가하였다. 저온 저장한 시료는 저장기간 20일째는 정유량의 현저한 중가추세를 보였으나 60일까지는 유지 혹은 완만한 중가추세를 보였다. 당귀의 휘발성 성분을 분석한 결과 당귀의 주요 향기성분으로 극성 컬럼에서는 ${\beta}-elemene$ 등의 terpene hydrocarbon류, eudesmol 등의 terpene alcohol류, (-)-trans-myrtanyl acetate ester 등이 둥정되었다. 비극성 컬럼에서는 camphene 등의 terpene hydrocarbon류, ${\alpha}-eudesmol$ 둥의 terpene alcohol류, butylidene phthalide 등이 동정되었다. 특히 eudesmol류는 상온저장에서 전체 정유량의 45%, 저온저장에서 48%를 차지했다. 당귀의 휘발성 성분으로 극성과 비극성 컬럼에서 함량이 많은 eudesmol과 terpene alcohol류 등은 독특하고 상쾌한 당귀의 향에 기여하리라고 생각된다. 저장 방법 면에서 상온저장한 시료와 저온 저장한 시료를 비교해보면 당귀의 대부분의 향기성분의 함량은 저온저장한 시료에서 많았다. 그리고 eudesmol은 전체적으로 상온저장 시료와 저온저장 시료 양쪽에서 많았으나 저온저장한 시료 쪽의 함량이 더 많았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.229-233
• /
• 1990

A new on-line optimization technique of a distillation column is presented. The equation decoupling method and the simultaneous solution method are combined to simulate the distillation process. The storage requirement is small enough to run on a PC. A improved successive quadratic programming is used to find the optimum operating conditions. The optimizer is intensively tested by using the dynamic simulator, SPEEDUP. After this, the technique is applied to a binary distillation column that treats methanol and water.

• FOCUS: LIFE SCIENCE
• /
• 제1호
• /
• pp.8.1-8.3
• /
• 2024

Ultra-high performance liquid chromatography (UHPLC) systems are integral to modern analytical laboratories, necessitating careful maintenance and operation protocols to ensure optimal performance. This document provides comprehensive guidelines for the proper shutdown and reactivation of UHPLC systems to prevent damage and maintain operational efficiency. • Shutdown: Remove the column and replace it with a union to avoid blockages. Flush the system with a compatible solvent mix, clean mobile phase reservoirs to prevent microbial growth, flush the pump with storage solvent, and clean the autosampler, including the needle and injection port. • Reactivation: Inspect the system for wear or damage, gradually reintroduce mobile phases starting with a weak solvent, reinstall the column securely, and perform system checks on baseline stability, pressure consistency, and detector performance. By adhering to these guidelines, laboratories can ensure the longevity and reliability of their UHPLC systems, maintaining high analytical performance and minimizing downtime. These procedures help prevent common issues such as blockages, contamination, and component wear, thereby supporting efficient and accurate analytical operations.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.417-439
• /
• 2017

The stone columns are increasingly being used as a soil improvement method for supporting a wide variety of structures (such as road embankment, buildings, storage tanks etc.) especially built on soft soil. Soil improvement by the stone column method overcomes the settlement problem and low stability. Nevertheless, stone column in very soft soils may not be functional due to insufficient lateral confinement. The required lateral confinement can be overcome by encasing the stone column with a suitable geosynthetic. Encasement of stone columns with geogrid is one of the ideal forms of improving the performance of stone columns. This paper presents the results of a series of experimental tests and numerical analysis to investigate the behavior of stone columns with and without geogrid encasement in soft clay deposits. A total of six small scale laboratory tests were carried out using circular footing with diameters of 0.05 m and 0.1 m. In addition, a well-known available software program called PLAXIS was used to numerical analysis, which was validated by the experimental tests. After good validation, detailed of parametric studies were performed. Different parameters such as bearing capacity of stone columns with and without geogrid encasement, stiffness of geogrid encasement, depth of encasement from ground level, diameter of stone columns, internal friction angle of crushed stone and lateral bulging of stone columns were analyzed. As a result of this study, stone column method can be used in the improvement of soft ground and clear development in the bearing capacity of the stone column occurs due to geogrid encasement. Moreover, the bearing capacity is effected from the diameter of the stone column, the angle of internal friction, rigidity of the encasement, and depth of encasement. Lateral bulging is minimized by geogrid encasement and effected from geogrid rigidity, depth of encasement and diameter of the stone column.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.357-373
• /
• 2019

Steel storage racks are slender structures whose overall behavior and the capacity depend largely on the flexural behavior of the base-plate to upright connections and on the behavior of beam-to-column connections. The base-plate upright connection assembly details, anchor bolt position in particular, associated with the high-rise steel storage racks differ from those of normal height steel storage racks. Since flexural behavior of high-rise rack base connection is hitherto unavailable, this investigation experimentally establishes the flexural behavior of base-plate upright connections of high-rise steel storage racks. This investigation used an enhanced test setup and considered nine groups of three identical tests to investigate the influence of factors such as axial load, base plate thickness, anchor bolt size, bracket length, and upright thickness. The test observations show that the base-plate assembly may significantly influence the overall behavior of such connections. A rigid plate analytical model and an elastic plate analytical model for the overall rotations stiffness of base-plate upright connections with concentric anchor bolts were constructed, and were found to give better predictions of the initial stiffness of such connections. Analytical model based parametric studies highlight and quantify the interplay of components and provide a means for efficient maximization of overall rotational stiffness of concentrically anchor bolted high-rise rack base-plate upright connections.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.121-129
• /
• 2006

쇄석기둥 공법은 성토제방, 교량교대기초, 오일탱크와 같은 침하에 민감한 구조물의 지지력 증대 및 압밀 촉진에 효과적인 지반 개량 공법이다. 쇄석기둥 공법은 지반의 지지력 증대, 침하감소, 측방유동 방지 및 액상화 방지 등의 효과를 기대할 수 있다. 최근 들어서는 쇄석기둥의 외벽을 토목섬유로 보강(감쌈) 구속력을 증가시켜 줌으로써 쇄석기둥 지반의 하중지지력을 개선시키는 공법에 대한 관심이 증가하고 있으나, 지오그리드 보강 쇄석기둥 공법에 대한 연구는 체계화되어 있지 않는 실정이다. 본 연구에서는 실내모형실험을 통해 지오그리드로 보강 쇄석기둥의 하중지지력 특성 및 파괴형태를 고찰하였으며, 실험결과를 통해 지오그리드로 보강하지 않은 쇄석기둥공법에 비해 지오그리드보강 쇄석기둥공법의 지지력 개선효과가 크게 나타남을 알 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.208-210
• /
• 2008

We have developed a LCD Panel that form storage capacitance for pixels between pixel electrode of bottom glass and common electrode of top glass. This method could make higher transmission and higher production yield than before by removing storage electrode line and capacitance on the bottom glass by simplifying bottom pixel structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.776-781
• /
• 2001

Internal pipes technology for LNG Storage tank developed because of the perceived safety risk of having an opening near the base of the shell. This is because the shell at this point is the most highly stressed component of the primary containment. other, secondary, problems arise because the movement of the tank in this region is also at a maximum. This requires the use of bellows either in the interspace or on the outside of the outer tank. Therefore the internal pipe, through the roof, solves these problems. The loading conditions calculated from design concept are then used to perform a pipe stress analysis. As well as determining the stresses in the internal pipe and checking against allowable stress, it determines the reaction forces at the support positions.

• 한국식품조리과학회지
• /
• 제19권1호
• /
• pp.83-95
• /
• 2003

Investigations were conducted on the changes in carotenoids content, and quantification of cis-trans-${\beta}$-carotene Isomers in pureed and cooked carrot and spinach during storage. The isomerization and degradation of carotenoids were monitored by high-performance liquid chromatography on a C$\_$30/ reversed-phase column with diode-array detection. The results showed that lutein, ail-trans-${\beta}$-carotene, ${\alpha}$-carotene, 9-cis-${\beta}$-carotene and 13-cis-${\beta}$-carotene were present in carrot and spinach. Zeaxanthin and cryptoxanthin were present in raw spinach. The contents of lutein, zeaxanthin, cryptoxanthin, ${\alpha}$-carotene and all-trans-${\beta}$-carotene in pureed and cooked carrot and spinach decreased with increasing storage period. The 9-cis and 13-cis carotenoid isomers were the major types formed in cooked carrot during storage. Cooking was not found to alter the carotenoid profile of the sample, but increased the total amount of carotenoids compared with pured ones. This increase could be explained that cooking itself increased the extraction efficiency and inactivated the enzymes degradating carotenoids.