• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.269-273
• /
• 2011

This study was conducted to investigate the resistance to abiotic stress in the progeny obtained by a cross between NDPK2-transgenic line (NDPK2-7-1) and MnSOD (SOD2) transgenic line (SOD2-2-1-1-35) to develop transgenic petunia highly resistant to environmental stress. At the treatment of 100 and $200{\mu}M$ methyl viologene (MV), the progeny was significantly less damaged than its parental plants (SOD2- or NDPK2-transgenic lines) as well as non-transgenic plants, implying its resistance to oxidative stress enhanced than SOD2- or NDPK2-transgenic plants. In an expression of 11 quantitative traits, the progeny remained similar to control plants, although it infrequently displayed slightly longer or wider than non-transgenic control plants. In the color and shape of flowers, there was no significant difference between the progeny and its parents or non-transgenic control.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.195-207
• /
• 1995

In order to study the embryonic development and hatching of wild long shanny, Stichaeus grigorjewi, were caught with the gill nets in the East Sea of Korea, and stocked at indoor tanks to induce natural spawning in February 25, 1994 and February 16 to 24, 1995. They were already matured when stocked, and average body length (50.66 cm) and body weight (1,192.74 g) of 57 females and average body length (48.62 cm) and body weight (612.58g) of 43 males were recorded. Before stocking, they were inserted with identification tags(ID tags) in the dorsal muscle, and spawning was traced by the portable reader (Destron/lDl Ltd.) Forty females among 57 spawned successfully in the average of 4 days after stocking. Females spawned almost all eggs contained in the ovaries at one time in the form of an egg mass and averaging 227,200 eggs Per egg mass. The egg mass was oval in shape, translucent milky in color, 20.32cm long axis and 14.57cm short axis in size, and 803.7g in weight. Male parents guarded their egg masses and circulated water with the tail part of the body. Fertilized egg was spherical in shape, and their average diameter was 1.54 mm. Each egg had a containing single oil globule, and it's average diameter was 0.37 mm. The average water temperature was $13.2^{\circ}C$ and incubation times after fertilization were 5 hours 25 minutes up to 2-cell stage, 13 hours up to morula stage, and 66 hours 35 minutes up to embryo formation stage. Hatching rate was approximately 10 percent in 368 hours 50 minutes after fertilization, and approxionateoly 90 percent of eggs were hatched in 425 hours 30 minutes after fertilization.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.81-96
• /
• 2013

Video information retrieval has become a very important issue because of the explosive increase in video data from Web content development. Meanwhile, content-based video analysis using visual features has been the main source for video information retrieval and browsing. Content in video can be represented with content-based analysis techniques, which can extract various features from audio-visual data such as frames, shots, colors, texture, or shape. Moreover, similarity between videos can be measured through content-based analysis. However, a movie that is one of typical types of video data is organized by story as well as audio-visual data. This causes a semantic gap between significant information recognized by people and information resulting from content-based analysis, when content-based video analysis using only audio-visual data of low level is applied to information retrieval of movie. The reason for this semantic gap is that the story line for a movie is high level information, with relationships in the content that changes as the movie progresses. Information retrieval related to the story line of a movie cannot be executed by only content-based analysis techniques. A formal model is needed, which can determine relationships among movie contents, or track meaning changes, in order to accurately retrieve the story information. Recently, story-based video analysis techniques have emerged using a social network concept for story information retrieval. These approaches represent a story by using the relationships between characters in a movie, but these approaches have problems. First, they do not express dynamic changes in relationships between characters according to story development. Second, they miss profound information, such as emotions indicating the identities and psychological states of the characters. Emotion is essential to understanding a character's motivation, conflict, and resolution. Third, they do not take account of events and background that contribute to the story. As a result, this paper reviews the importance and weaknesses of previous video analysis methods ranging from content-based approaches to story analysis based on social network. Also, we suggest necessary elements, such as character, background, and events, based on narrative structures introduced in the literature. We extract characters' emotional words from the script of the movie Pretty Woman by using the hierarchical attribute of WordNet, which is an extensive English thesaurus. WordNet offers relationships between words (e.g., synonyms, hypernyms, hyponyms, antonyms). We present a method to visualize the emotional pattern of a character over time. Second, a character's inner nature must be predetermined in order to model a character arc that can depict the character's growth and development. To this end, we analyze the amount of the character's dialogue in the script and track the character's inner nature using social network concepts, such as in-degree (incoming links) and out-degree (outgoing links). Additionally, we propose a method that can track a character's inner nature by tracing indices such as degree, in-degree, and out-degree of the character network in a movie through its progression. Finally, the spatial background where characters meet and where events take place is an important element in the story. We take advantage of the movie script to extracting significant spatial background and suggest a scene map describing spatial arrangements and distances in the movie. Important places where main characters first meet or where they stay during long periods of time can be extracted through this scene map. In view of the aforementioned three elements (character, event, background), we extract a variety of information related to the story and evaluate the performance of the proposed method. We can track story information extracted over time and detect a change in the character's emotion or inner nature, spatial movement, and conflicts and resolutions in the story.

• Journal of KIISE:Software and Applications
• /
• v.31 no.10
• /
• pp.1332-1344
• /
• 2004

Upon development of information super-highway and multimedia-related technoiogies in recent years, more efficient technologies to transmit, store and retrieve the multimedia data are required. Among such technologies, firstly, it is common that the semantic-based image retrieval is annotated separately in order to give certain meanings to the image data and the low-level property information that include information about color, texture, and shape Despite the fact that the semantic-based information retrieval has been made by utilizing such vocabulary dictionary as the key words that given, however it brings about a problem that has not yet freed from the limit of the existing keyword-based text information retrieval. The second problem is that it reveals a decreased retrieval performance in the content-based image retrieval system, and is difficult to separate the object from the image that has complex background, and also is difficult to extract an area due to excessive division of those regions. Further, it is difficult to separate the objects from the image that possesses multiple objects in complex scene. To solve the problems, in this paper, I established a content-based retrieval system that can be processed in 5 different steps. The most critical process of those 5 steps is that among RGB images, the one that has the largest and the smallest background are to be extracted. Particularly. I propose the method that extracts the subject as well as the background by using an Image, which has the largest background. Also, to solve the second problem, I propose the method in which multiple objects are separated using RGB channel selection techniques having optimized the excessive division of area by utilizing Watermerge's threshold value with the object separation using the method of RGB channels separation. The tests proved that the methods proposed by me were superior to the existing methods in terms of retrieval performances insomuch as to replace those methods that developed for the purpose of retrieving those complex objects that used to be difficult to retrieve up until now.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.2
• /
• pp.87-99
• /
• 2016

This study was carried out to characterize 127 recently developed cultivars of Rose of Sharon (Hibiscus spp.) in Korea and foreign Countries for landscape uses. The examined factors were growth characteristics such as tree height of a 1-year grafted plant(cm), plant type, growth habit, leaf characteristics such as shape and size, flower characteristics such as color, shape, size, and red eye during 2014 and 2015 for landscape uses. The results are obtained as follows; Hibiscus hybrid 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' had vigorous shoot growth and tall tree size of 100cm. New Hibiscus cultivars, Hibiscus hybrid 'Daewangchun' and 'Daeil', having vigorous growth, uniform plant habit, upright, and compact branches were developed through interspecific crosses between H. syriacus 'Samchully' (♀) and H. sinosyriacus 'Seobong' (♂). This newly developed cultivar 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' having tall vigorous growth d unique flower with long red eye can be used as street tree or specimen plant in landscape. Otherwise, H. syriacus 'Tamla', 'Melrose', 'Bidan', 'Hi Lea', 'Byeollee', 'Byunghwa', 'Mibak', 'Hanyang', 'Chungam', 'Lil Kim Violet', 'Jongmoo', 'Eunhasu', Hibiscus hybrid 'Saehanseo', and Hibiscus hybrid 'Yousoon' were selected as small tree of 30~39cm. They had dwarf form in tree seemed to be suitable for pot or flower bed planting on both indoor and outdoor conditions. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim' were less than 30 cm of tree size. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim', characterized by its compact, upright and outwardly spreading plant habit; freely branching habit; dark green-colored leaves; good garden performance. Therefore, the new cultivars with tall and small tree size were a promising cultivar as a ground covers or pot planting as woody landscape plant.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.142-157
• /
• 2015

This study examines how traditional knowledge functions in the specific techniques to make pottery in terms of the traditional knowledge on the pottery techniques of Onggi potters. It focuses on how traditional pottery manufacturing skills are categorized and what aspects are observed with regard to the techniques. The pottery manufacturing process is divided into the preparation step of raw material, the molding step of pottery, and the final plasticity step. Each step involves unique traditional knowledge. The preparation step mainly comprises the knowledge on different kinds of mud. The knowledge is about the colors and properties of mud, the information on the regional distribution of quality mud, and the techniques to optimize mud for pottery manufacturing. The molding step mainly involves the structure and shape of spinning wheels, the techniques to accumulate mud, ways to use different kinds of tools, the techniques to dry processed pottery. The plasticity step involves the knowledge on kilns and the scheme to build kilns, the skills to stack pottery inside of the kilns, the knowledge on firewood and efficient ways of wood burning, the discrimination of different kinds of fire and the techniques to stoke the kilns. These different kinds of knowledge may be roughly divided into three categories : the preparation of raw material, molding, and plasticity. They are closely connected with one another, which is because it becomes difficult to manufacture quality pottery even with only one incorrect factor. The contents of knowledge involved in the manufacturing process of pottery focused are mainly about raw material, color, shape, distribution aspect, fusion point, durability, physical property, etc, which are all about science. They are rather obtained through the experimental learning process of apprenticeship, not through the official education. It is not easy to categorize the knowledge involved. Most of the knowledge can be understood in the category of ethnoscience. In terms of the UNESCO world heritage of intangible cultural assets, the knowledge is mainly about 'the knowledge on nature and universe'. Unique knowledge and skills are, however, identified in the molding step. They can be referred to 'body techniques', which unify the physical stance of potters, tools they employ, and the conceived pottery. Potters themselves find it difficult to articulate the knowledge. In case stated, it cannot be easily understood without the experience and knowledge on the field. From the preparation of raw material to the complete products, the techniques and traditional knowledge involved in the process of manufacturing pottery are closely connected, employing numerous categories and levels. Such an aspect can be referred to as a 'techniques chain'. Here the techniques mean not only the scientific techniques but also, in addition to the skills, the knowledge of various techniques and levels including habitual, unconscious behaviors of potters.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.117-142
• /
• 1997

This study is on perfume case that is one of a great number of ornaments which was designed by out ancestors. We had developed the tradition and the history of perfume case bag fan-weight etc. These have the same function as the present perfume. case. There were basket-shaped perfume cases which were the smellest one among the personal girdle ornaments in the silla era. The various patterned perfume case were made of gold metal coral platinum or green jadeite etc. In the single-crop trinkets a embroidered perfume bag with the gold and silver thread whose forms perfectly match their functions appeared during the Yi Dynasty. There was also a perfume bag which was one of the daily necessities. A precious "jul perfume" was carried by noble women. A fan-weight perfume bag was attached to the fan to emphasize the intrinsic beauty of utility and function. It is necessary to know the function of prefume case. As perfume case is weared on the clothes it was given more decorative effects as well as the function of medicinal amulet with a sweet smell. Therefore it is very important for us to study perfume case that has various function as an ornament. So The purpose of this study is to investigate the practical and decorative side of perfume case with the general examines of perfume finding how to practice use through our life. The results were as follows; 1. The first use of perfume is perfume through smoke which is for ceremony of religion It removes human body odor by degrees and spreads a sweet odor. Also the materials for making perfume of early age is aromatic plants which will be used flour-made flowers stems. As the materials for making perfume use is increasing today we can invent alcohol perfume today 2. Our country the custom of perfume-used is wide. Among them men's perfume-used was very special phenomenon. For example men were wearing perfume bag in the Silla era. Because perfume represented wealth and noble in those days. They shew off social position personality through perfume-used. 3. One of early religion ceremony article there was the perfume. And perfume case was means for containing perfume. Gradually the perfume case was used widly as increasing needs of perfume in human life. 4. In the middle period of 'Koryo' Dynasty perfume cases had a close relationship with clothes but after Mongolian has been attacked 'Koryo' there were changes in wearing clothes therefore the position of perfume cases were transfered to coat string that was the origin of decoration style that they began. That is to say the perfume case has been influenced the position of perfume case shapes with changing of fashion. 5. The perfume case has been made manifest various function as an ornament. In the practical side First medical-perfume in perfume case has been played an important role in first-aid medicine in critical condition. Second it was amulet for self protection. That is the shape pattern color materials perfume of the perfume case was represented the amuletive nature. Third it was used as substitute article of perfume. Modern women use liquid-perfume as our ancestors used perfume case bag or jul perfume As started above. Also In the decorative side the perfume case has a beautiful formative arts by itself as well as a close relationship with clothes. That well as a close relationship with clothes. That is when the perfume case is worn on the clothes costume is showed aesthetices. That is the materials shapes color pattern of the perfume case we can see the visual beauty also the materials colors embroidered pattern knots tassel that are used the perfume case are increased the decorative beauty of costume. Sixth the symbol in pattern of the pattern case is shown ancetor's wealth and rank health longevity immortality many-born-boy in those days. Today the perfume case is not used with changing of costume by degrees, Accordingly I hope that the result of this study is an influened in devlopment of the perfume case design with matching the modern fashion.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.142-153
• /
• 2011

'Silla Monument Stone in Jungseong-ri, Pohang' was discovered in Pohang City, Gyeongsangbuk Province of Korea in 2009. The monument stone with irregular shape has dimensions of maximum height of 105cm, width of 47.6~49.6cm, thickness of 13.8~14.7cm and weight of 115kg. The results of monument stone was found to be granitite. Conservation treatment procedure was carried out in the order of production of Weathering map, cleaning of surface pollutants, consolidation using ethyl silicate. Black pollutant(crust) that covered more than 60% of the surface was analyzed first in order to remove the pollutants on the surface of the monumental stone by cleaning of surface pollutants using laser. The purpose on analysis was not only to verify the pollutants on the stone but also to carry out preliminary cleaning by securing rocks with same pollutant as the monumental stone. As the results of analysis using p-XRF(PMI. INNOV-X, USA) on the site, high level of Mn and Fe were detected, and the analysis of small section that had been fallen off with SEM/EDX for the purpose of quantitative analysis also detected high level of Mn. The Similar contaminants on Stone secured in the manner described above were made into 10 samples ($5cm{\times}5cm$) and was subjected to preliminary cleaning by Nd-YAG Laser(Laser&Physics, Korea). The results of surface observation through portable microscope during cleaning revealed that the power of 460mJ, wavelength of 1064nm and irradiation frequency of 1,800~2,300 per $25cm^2$ were most effective. Evaluation on the preservative treatment was made through confirmation of the extent of removal through color-difference meter measurement and component analysis prior to and following removal of the pollutants. As the result of color-difference meter measurement increase in the brightness was evidenced by the increase in the brightness ($L^*$)value from 33 to 49, and it was possible to ascertain the reduction in the pollutants as the content of Mn was reduced by about 80% from $50,000{\pm}5,000ppm$ to $10,000{\pm}2,000pmm$ from the result of component analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Korean Journal of Plant Resources
• /
• v.20 no.1
• /
• pp.43-49
• /
• 2007

This study was conducted to examine the pattern and characteristics of flowering and leaf emergence for twenty two kinds of the genus of Lycoris sp. One species of Lycoris was flowered on July to August, twelve species on August, and nine species on September. Shape of flowers were as follows : Nine species belong to L. radiara-shaped flower, seven species L. squamigera-shaped flower, and seven species the intermediate type. Flower color of three kind were an order of descent red and pink. seven kind white, four kind yellow, three kind orange, and two kind purple colors. Ten Lycoris species were good fertile, and two kinds were poor fertile. The average length of pollen grain was ranged from $48.53\;to\;88.62{\mu}m$, and the width from $22.87\;to\;33.67{\mu}m$. Eleven kinds were spring-leaf emergence type, and ten kind autumn-leaf emergence types. Hunter values in leaves were as follows : $L^*$ value was ranged from 31.6 to 45.2; $a^*$ values from -6.74 to -17.46; $b^*$ values from 6.19 to 21.89 Leaf width was ranged from 0.90 to 2.35cm, and its shape was oblong. The length of epidermal cells was 0.33 to 0.75mm, and the width was $38.53\;to\;90.00{\mu}m$. Most of stomata were distributed in the back side of leaves. The length of stomata was ranged from $67.12\;to\;104.89{\mu}m$, and its width was from $14.90\;to\;71.52{\mu}m$.