• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.461-476
• /
• 2015

Rankine's theory of earth pressure cannot be directly employed to c-${\phi}$ soils backfill with a sloping ground subjected to complex loadings. In this paper, an analytical solution for active earth pressures on retaining structures of cohesive backfill with an inclined surface subjected to surcharge, pore water pressure and seismic loadings, are derived on the basis of the lower-bound theorem of limit analysis combined with Rankine's earth pressure theory and the Mohr-Coulomb yield criterion. The generalized active earth pressure coefficients (dimensionless total active thrusts) are presented for use in comprehensive design charts which eliminate the need for tedious and cumbersome graphical diagram process. Charts are developed for rigid earth retaining structures under complex environmental loadings such as the surcharge, pore water pressure and seismic inertia force. An example is presented to illustrate the practical application for the proposed coefficient charts.

• 한국경영과학회지
• /
• 제20권3호
• /
• pp.123-146
• /
• 1995

Several quality control schemes have been extensively compared using multivariate normal data sets simulated with various correlation structures. They include multiple univariate CUSUM charts, multivariate EWMA charts, multivariate CUSUM charts and Shewhart T$^{3}$ chart. This paper considers a new approach of the multivariate EWMA chart, in which the smoothing matrix has full elements instead of only diagonal elements. Performance of the schemes is measured by avaerage run length (ARL), coefficient of variation of run length (CVRL) and rank in order of signaling of off-target shifts in the process mean vector. The schemes are also compared by noncentrality parameter. The multiple univariate CUSUM charts are generally affected by the correlation structure. The multivariate EWMA charts provide better ARL performance. Especially, the new EWMA chart shows remarkable results in small shifts.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.539-552
• /
• 2014

A simplified probability-based design charts for stone column-improved ground have been presented based on the unit cell approach. The undrained cohesion ($c_u$) and coefficient of radial consolidation ($c_r$) of the soft soil are taken as the most predominant random variables. The design charts are developed to estimate the diameter of the stone column or the spacing between the stone columns by employing a factored design value of $c_r$ and $c_u$ so as to satisfy a specific probability level of the target degree of consolidation and/or a target safe load that needs to be achieved in a specified timeframe. The design charts can be used by the practicing engineers to design the stone column-improved ground by considering consolidation and /or bearing capacity of the improved ground.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.71-81
• /
• 2018

Soils are mostly nonhomogeneous and anisotropic in nature. In this study, nonhomogeneity and anisotropy of soil are taken into consideration by assuming that the cohesion increases with depth linearly and also varies with respect to direction at a particular point. A three-dimensional rotational failure mechanism is adopted, and then a three-dimensional stability analysis of slope is carried out with the failure surface in the shape of a curvilinear cone in virtue of the limit analysis method. A quasistatic approach is used to develop stability charts in nonhomogeneous and anisotropic soils. One can easily read the safety factors from the charts without the need for iterative procedures for safety factors calculation. The charts are of practical importance to prevent a plane failure in excavation slope whether it is physically constrained or not. Then the most suitable location of piles within the reinforced slope in nonhomogeneous and anisotropic soils is explored, as well as the interactions of nonhomogeneous and anisotropic coefficients on pile reinforcement effects. The results indicate that piles are more effective when they are located between the middle and the crest of the slope, and the nonhomogeneous coefficient as well as the anisotropic coefficient will not only influence the most suitable location for piles but also affect the calculated safety factor of existing reinforced slope. In addition, the two coefficients will interact with each other on the effect on slope reinforcement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.858-876
• /
• 2021

Although widely used, the design of the bulbous bow for ships has been difficult due to the complex interference between the wave system generated by the bulb and the wave system of the ship hull. Until now, a bulbous bow has been often designed using Kracht charts, which were established based on model test data, but these charts apply only to ships with a block coefficient C_B = 0.56-0.82, Froude number Fn = 0.20-0.40, and the obtained bulb sizes are only close to optimal. This paper presents a new method for the optimal design of bulbous bow, starting from the design of an initial bulb using Kracht charts for ships with any block coefficient or Froude number, then resizing this initial bulb to define the optimal bulb sizes based on a multi-objective function of the required power reduction, and a combined solution of Computation Fluid Dynamics (CFD) analysis and surrogate models. This study was applied to a fishing vessel FAO 75, which has been model tested and used to design steel fishing vessels in Vietnam recently. The obtained quantitative results showed the same trend as the theory and practice, with a reduction of the ship's required power by about 14%.

• Journal of the Korean Data and Information Science Society
• /
• 제23권5호
• /
• pp.1037-1044
• /
• 2012

Multivariate control charts for effectively monitoring every component in the dispersion matrix of multivariate normal process are considered. Through the numerical results, we noticed that the multivariate control charts based on sample statistic $V_i$ by Hotelling or $W_i$ by Alt do not work effectively when the correlation coefficient components in dispersion matrix are increased. We propose a combined procedure monitoring every component of dispersion matrix, which operates simultaneously both control charts, a chart controlling variance components and a chart controlling correlation coefficients. Our numerical results show that the proposed combined procedure is efficient for detecting changes in both variances and correlation coefficients of dispersion matrix.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.102-109
• /
• 2006

This paper investigates the effects of non-normality on the performance of univariate and multivariate cumulative sum(CUSUM) control charts for monitoring the process mean. In-control and out-of-control average run lengths of the charts are examined for the univariate/multivariate lognormal and t distributions. The effects of the reference value and the correlation coefficient under the non-normal distributions are also studied. Simulation results show that the CUSUM charts with small reference values are robust to non-normality but those with moderate or large reference values are sensitive to non-normal data especially to process data from skewed distributions. The performance of the chart to detect mean shift of a process is not invariant to the direction of the shift for skewed distributions.

• Journal of the Korean Data and Information Science Society
• /
• 제22권4호
• /
• pp.803-809
• /
• 2011

Properties of multivariate Shewhart and CUSUM charts for monitoring variance-covariance matrix, specially focused on correlation coefficient components, are investigated. The performances of the proposed charts based on control statistic Lawley-Hotelling $V_i$ and likelihood ratio test (LRT) statistic $TV_i$ are evaluated in terms of average run length (ARL). For monitoring correlation coe cient components of dispersion matrix, we found that CUSUM chart based on $TV_i$ gives relatively better performances and is more preferable, and the charts based on $V_i$ perform badly and are not recommended.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1225-1256
• /
• 2014

Calculating the seismic displacement of retaining walls has an important role in the optimum design of these structures. Also, studying the effect of surcharge is important for the calculation of active pressure as well as permanent displacements of the wall. In this regard, some researchers have investigated active pressure; but, unfortunately, there are few investigations on the seismic displacement of retaining walls with surcharge. In this research, using limit analysis and upper bound theorem, permanent seismic displacement of retaining walls with surcharge was analyzed for sliding and overturning failure mechanisms. Thus, a new formulation was presented for calculating yield acceleration, critical angle of failure wedge, and permanent displacement of retaining walls with surcharge. Also, effects of surcharge, its location and other factors such as height of the wall and internal friction angle of soil on the amount of seismic displacements were investigated. Finally, designing charts were presented for calculating yield acceleration coefficient and angle of failure wedge.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.211-216
• /
• 2006

Monitoring variability is a vital part of modem statistical process control. The conventional Shewhart Rand S charts address the setting where the in-control process readings have a constant variance. In some settings, however, it is the coefficient of variation, rather than the variance, that should be constant. This paper develops a chart, equivalent to the S chart, for monitoring the coefficient of variation using rational groups of observations.