• 제목/요약/키워드: cobalt catalyst

검색결과 125건 처리시간 0.023초

티타니아 담지 코발트 촉매를 이용한 일산화탄소 수소화 반응에서 칼륨첨가에 의한 선택성 변화 (Selectivity Changes in CO Hydrogenation over Potassium Added Titania-supported Cobalt Catalysts)

  • 이동근;안주현
    • 공업화학
    • /
    • 제1권1호
    • /
    • pp.100-105
    • /
    • 1990
  • 칼륨과 티타니아 담체가 일산화탄소 수소화 반응에서 분자량이 큰 불포화 탄화수소의 합성에 유리할 것으로 예상하여, 칼륨염이 첨가된 티타니아 담지 코발트 촉매를 제조하여 일산화탄소 수소화 반응에 사용하였다. 칼륨과 티타니아 담체는 일산화탄소 수소화 반응에서 분자량이 큰 불포화 탄화수소 화합물을 합성하는 데 있어 중요한 역할을 하였을 뿐 아니라, 탄소 누적에 의한 촉매의 비활성화 방지에도 기여하였다. 이는 티타니아 담체가 코팔트 금속과 강한 상호작용을 하고, 칼륨은 코발트 금속에 전자를 풍부하게 하는 전자 공급자로 작용하여 일산화탄소의 흡착력을 증가시켰기 때문으로 믿어진다.

  • PDF

Effect of Manganese Promotion on Al-Pillared Montmorillonite Supported Cobalt Nanoparticles for Fischer-Tropsch Synthesis

  • Ahmad, N.;Hussain, S.T.;Muhammad, B.;Ali, N.;Abbas, S.M.;Khan, Y.
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권10호
    • /
    • pp.3005-3012
    • /
    • 2013
  • The effect of Mn-promotion on high surface area Al-pillared montmorillonite (AlMMT) supported Co nanoparticles prepared by hydrothermal method have been investigated. A series of different weight% Mn-promoted Co nanoparticles were prepared and characterized by XRD, TPR, TGA, BET and SEM techniques. An increase in the surface area of MMT is observed with Al-pillaring. Fischer-Tropsch catalytic activity of the as prepared catalysts was studied in a fixed bed micro reactor at $225^{\circ}C$, $H_2/CO$ = 2 and at 1 atm pressure. The data showed that by the addition of Mn the selectivity of $C_1$ dropped drastically while that of $C_2-C_{12}$ hydrocarbons increased significantly over all the Mn-promoted Co/AlMMT catalysts. The $C_{13}-C_{20}$ hydrocarbons remained almost same for all the catalysts while the selectivity of $C_{21+}$ long chain hydrocarbons decreased considerably with the addition of Mn. The catalyst with 3.5%Mn showed lowest $C_{21+}$ and highest $C_2-C_{12}$ hydrocarbons selectivity due to cracking of long chain hydrocarbons over acidic sites of MMT.

Preparation of [C60]Fullerene-CoS2 Nanocomposites and Kinetics Study for Photocatalytic Degradation of Organic Dyes

  • Kim, Jae Jin;Ko, Weon Bae
    • Elastomers and Composites
    • /
    • 제51권1호
    • /
    • pp.49-55
    • /
    • 2016
  • Nanosized cobalt disulfide ($CoS_2$) particles were synthesized with 0.08 M cobalt chloride hexahydrate ($CoCl_2{\cdot}6H_2O$) and 0.2 M sodium thiosulfate pentahydrate ($Na_2S_2O_3{\cdot}5H_2O$) dissolved in distilled water under microwave irradiation. $[C_{60}]Fullerene-CoS_2$ nanocomposites were prepared with nanosized $CoS_2$ particles and [$C_{60}$]fullerene as heated by $700^{\circ}C$ for 2 h in an electric furnace. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) identified the heated $[C_{60}]fullerene-CoS_2$ nanocomposites. Heated $[C_{60}]fullerene-CoS_2$ nanocomposites were investigated the activity of photocatalytic degradation as a catalyst in various organic dyes like acid yellow 23, methylene blue, methyl orange, and rhodamine B with ultraviolet light at 254 nm by UV-vis spectrophotometer.

Effect of activated carbon modified with oxalic acid on the production of IPA from MX catalyzed by H3PW12O40@carbon and cobalt

  • Fang, Zhou-wen;Liu, Hua-jie;Wang, Zhi-hao;Wen, Di;Long, Xiang-li
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제68권
    • /
    • pp.87-98
    • /
    • 2018
  • The production of IPA from the oxidation of MX is completed under the catalysis of $H_3PW_{12}O_{40}$ (HPW) loaded on carbon and cobalt. Oxalic acid is tried to modify the carbon to upgrade the catalytic activity of HPW@C catalyst. The experiments show that the best carbon is acquired by carbonizing the carbon at $450^{\circ}C$ for 2 h in $N_2$ after being soaked in a $0.20mol\;l^{-1}$ oxalic acid solution for 16 h. The IPA produced by the HPW@C catalysts prepared with the carbon modified is 58.9% over that obtained by the catalysts prepared with the original carbon.

Synthesis of CoSe2/RGO Composites and Its Application as a Counter Electrode for Dye-Sensitized Solar Cells

  • Ko, Yohan;Choi, Wooyeol;Kim, Youbin;Lee, Chanyong;Jun, Yongseok;Kim, Junhee
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권3호
    • /
    • pp.313-320
    • /
    • 2019
  • In this study, cobalt diselenide ($CoSe_2$) and the composites ($CoSe_2@RGO$) of $CoSe_2$ and reduced graphene oxide (RGO) were synthesized by a facile hydrothermal reaction using cobalt ions and selenide source with or without graphene oxide (GO). The formation of $CoSe_2@RGO$ composites was identified by analysis with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and scanning electron microscopy (SEM). Electrochemical analyses demonstrated that the $CoSe_2@RGO$ composites have excellent catalytic activity for the reduction of $I_3{^-}$, possibly indicating a synergetic effect of $CoSe_2$ and RGO. As a consequence, the $CoSe_2@RGO$ composites were applied as a counter electrode in DSSC for the reduction of redox couple electrolyte, and exhibiting the comparable power conversion efficiency (7.01%) to the rare metal platinum (Pt) based photovoltaic device (6.77%).

비귀금속촉매 미생물연료전지의 연속운전을 통한 전기 생산 (Continuous electricity generation in microbial fuel cells with non-precious metal catalysts)

  • 문충만;김동훈
    • 유기물자원화
    • /
    • 제23권1호
    • /
    • pp.45-51
    • /
    • 2015
  • 본 연구에서는 비귀금속 촉매인 iron(II) phthalocyanine (FePc)와 cobalt tetramethoxyphenylporphyrin(CoTMPP)를 환원전극촉매로 이용하여 미생물연료전지의 연속운전을 진행하였다. 연속운전은 유기물 부하 (0.5~3 g COD/L/d)와 HRT (0.25~1 day)의 조건을 달리 운전하여 미생물연료전지의 성능을 평가하였다. 미생물연료전지의 전력밀도는 환원전극의 성능에 크게 영향을 받았으며, 최대전력밀도는 $3.3W/m^3$로 백금을 사용한 미생물연료전지에서 나타났다. 하지만, HRT의 조건을 달리 한 실험에서 FePc를 사용한 미생물연료전지가 백금을 사용한 미생물연료전지와 유사한 성능을 나타냈으며, 연속운전에서 백금 촉매를 대체할 수 있는 적합한 물질로 나타났다. 반면에 CoTMPP를 사용한 미생물연료전지는 연속운전에서 내부 저항의 급격한 증가로 전력밀도가 급격히 감소하였다.

담지 코발트 촉매를 이용한 SO2의 원소황으로의 환원반응 특성 (The Catalytic Reduction of Sulfur Dioxide to Elemental Sulfur over Supported Cobalt Catalysts)

  • 박준효;한종대
    • 공업화학
    • /
    • 제10권8호
    • /
    • pp.1129-1135
    • /
    • 1999
  • ${\gamma}-Al_2O_3$, $TiO_2$$SiO_2$에 코발트를 함침시켜 촉매를 제조하고, 고정층 미분반응기에서 CO에 의한 $SO_2$환원반응 특성을 조사하였다. 이때 온도는 $350{\sim}550^{\circ}C$ 영역에서, $SO_2$농도를 1000~10000 ppm, $CO/SO_2$몰비를 1.0~3.0, 공간속도를 $5000{\sim}15000h^{-1}$의 영역에서 사용하였으며 대기압하에서 실행하였다. ${\gamma}-Al_2O_3$$TiO_2$는 코발트 담체로 우수한 특성을 보였으며, 5 wt % 코발트를 ${\gamma}-Al_2O_3$에 함침시켜 얻은 촉매로 $400^{\circ}C$ 이상의 온도에서 90% 이상의 높은 $SO_2$전환율과 6% 이하의 낮은 COS수율을 얻을 수 있었다. $CO/SO_2$의 최적몰비는 양론비인 2.0으로 나타났으며, 몰비가 3.0으로 증가하면 $SO_2$전환율은 증가하였으나 대부분의 반응생성물이 COS로 나타났다. 실험영역의 $SO_2$농도와 공간속도의 변화는 $SO_2$ 전환율과 반응선택성에 큰 영향을 미치지 않았다. 코발트는 활성화된 이후에 $CoS_2$ 상태로 존재하였으며 반응후에도 상변화는 관찰되지 않았다.

  • PDF

Selective Production of Aromatic Aldehydes from Heavy Fraction of Bio-oil via Catalytic Oxidation

  • Li, Yan;Chang, Jie;Ouyang, Yong;Zheng, Xianwei
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권6호
    • /
    • pp.1654-1658
    • /
    • 2014
  • High value-added aromatic aldehydes (e.g. vanillin and syringaldehyde) were produced from heavy fraction of bio-oil (HFBO) via catalytic oxidation. The concept is based on the use of metalloporphyin as catalyst and hydrogen peroxide ($H_2O_2$) as oxidant under alkaline condition. The biomimetic catalyst cobalt(II)-sulfonated tetraphenylporphyrin ($Co(TPPS_4)$) was prepared and characterized. It exhibited relative high activity in the catalytic oxidation of HFBO. 4.57 wt % vanillin and 1.58 wt % syringaldehyde were obtained from catalytic oxidation of HFBO, compared to 2.6 wt % vanillin and 0.86 wt % syringaldehyde without $Co(TPPS_4)$. Moreover, a possible mechanism of HFBO oxidation using $Co(TPPS_4)/H_2O_2$ was proposed by the research of model compounds. The results showed that this is a promising and environmentally friendly method for production of aromatic aldehydes from HFBO under $Co(TPPS_4)/H_2O_2$ system.

고분자전해질형 연료전지에서 산소극을 위한 백금-크롬-니켈 합금촉매의 전극특성 (Electrode Performance of Pt-Cr-Ni Alloy Catalysts for Oxygen Electrode in Polymer Electrolyte Fuel Cell)

  • 심중표;이홍기
    • 한국재료학회지
    • /
    • 제10권12호
    • /
    • pp.831-837
    • /
    • 2000
  • 고분자전해질형 연료전지에서 촉매의 활성을 증가시키기 위하여 기존에 사용되고 있는 백금과 전이금속인 chromium, nickel과의 합금을 제조하였다. XRD를 이용하여 합금의 구조가 $33^{\circ}$에서 superlattice line을 가지고 있는 것으로 보아 face centered cubic 구조를 가진 ordered alloy로 이루어졌다는 것을 알 수 있었다. 열처리 온도가 증가할수록 합금의 입자 크기는 증가하였으며, 결정 격자 상수는 감소하였다. 전지성능테스트, cyclic voltammogram 등을 통하여 mass activity, specific activity, Tafel slope, 개회로 전압을 측정한 결과, 합금촉매의 활성이 순수한 백금촉매보다 크게 향상되었음을 알 수 있었다.

  • PDF

Improved Tri-iodide Reduction Reaction of Co-TMPP/C as a Non-Pt Counter Electrode in Dye-Sensitized Solar Cells

  • Kim, Jy-Yeon;Lee, Jin-Kyu;Han, Sang-Beom;Lee, Young-Woo;Park, Kyung-Won
    • Journal of Electrochemical Science and Technology
    • /
    • 제1권2호
    • /
    • pp.75-80
    • /
    • 2010
  • We report Co-tetramethoxyphenylporphyrin on carbon particles (Co-TMPP/C) as a non-Pt catalyst for tri-iodide reduction in dye-sensitized solar cells (DSSCs). The presence of well-dispersed carbon and cobalt source in the catalyst surface is confirmed by transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray analysis. In the C 1s, Co 2p, and N 1s peaks measured by X-ray photoelectron spectroscopy, the C-N, Co-$N_4$, and N-C are assigned to the component at 285.7, 781.8, and 401 eV, respectively. Especially, the Co-TMPP/C shows improved current density, diffusion coefficient, and charge-transfer resistance in the ${I_3}^-/I^-$ redox reaction compared to conventional catalysts. Furthermore, in the DSSCs performance, the Co-TMPP/C shows increased short circuit current density, higher open circuit voltage, and improved cell efficieny in comparison with Pt/C.