• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.177-179
• /
• 2018

After Fukushima nuclear accident at 2011, nuclear industrial has been focused on operation and maintenance phase, not design and construction phase. Continued good operating performance of nuclear power plants has been the best critical issue to nuclear utilities. Replacement for complete components as well as parts of components is being procured because nuclear utilities must maintain safety and reliability of operating nuclear power plants. However, many suppliers and manufacturers are giving up a nuclear quality assurance program under reduction in new construction of nuclear power plants. It is able to be increased difficulty in procuring spare parts to support operations and maintenance of nuclear power plants. Over 20% of nuclear power plant equipment in some countries is obsolete. Owing to obsolescence of nuclear safety-related items and/or withdrawing a nuclear quality assurance program of suppliers and manufactures, some replacement item and part might be procured to the item not covered by appendix B to USNRC 10 CFR Part 50. Under various methods of the nuclear repair and replacement methodology, utilities are supposed to establish a typical program for a repair and replacement of an electrical equipment and its parts in conjunction with a nuclear quality assurance. Concerning this typical program, this study suggests the repair and replacement methodology of electrical equipments used in nuclear power plants by procurement of a power supply, based on nuclear regulations, codes, standards, guidelines, specific and general technical information, etc..

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.243-245
• /
• 2001

The reliability and probabilistic generation production cost evaluation of composite power systems are important for power system operation and expansion planning. This paper present a computer program which can evaluate the reliability and probabilistic generation production cost of composite power system using GUI(Graphic User Interface). In this computer program, Monte Carlo simulation methods and CMELDC(CoMposite power system Effective Load Duration Curve) were used.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.56.3-56
• /
• 2002

For the weld quality improvement and the convenient operation of machines, laser vision system can be used to track weld seams on pressure vessels. There are many bad conditions to the weld grooves such as cutting error, gap variation of weld joint, and offset error of center line caused by misalignment. We developed a laser vision seam tracking system which consists of a laser vision sensor, a two axis positioning mechanism and a user interface program running on the Windows system. It was found that our system worked well for U, V and X shaped grooves. We used an industrial PC as the system controller to secure immunity to electrical noise and dust. We introduce here a simple and...

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.975-976
• /
• 2007

Thermal and mechanical stresses, caused by repetitive start and stop and load fluctuation during long time operation, on winding stator bars are one of the main causes for electrical degradation of insulating materials. To understand the degradation process, we manufactured bar specimens with the same processes that make generator winding stator bars and the specimens were subjected to various degrees of thermal cycling. Measurements of the insulation properties, such as dissipation factor, tip-up and partial discharge, for un-aged specimens and for specimens aged by thermal cycling at 50, 100, 250, 500 and 1000 thermal cycles were performed. Finally all specimens were tested to obtain electrical breakdown voltages. In this paper we present the data and electrical degradation analysis results obtained during this program.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.287-291
• /
• 2006

The IEA Wind agreement for co-operation in the R&D of wind energy system was founded in 1974. The Korea has been a contracting party to the IEA wind energy program since 2003. The contracting parties are designated by the 20 member countries and the EC. IEA Wind agreement is for member countries to exchange information, knowledge and to organize international collaboration on R&D projects called Taskes and Annexes. The Executive Committee approves and controls the R&D Tasks, and its meetings are held twice a year. This paper describes the status of current 7 implementing Tasks that were reported to the recent 57th Executive Committee meeting this year in Brussels, Belgium.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.154-157
• /
• 2007

본 논문에서는 컴퓨터로 정밀 계측기기들을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구 하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

• Journal of Families and Better Life
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2009

The purpose of this study was to resolve the issues of inferior housing environment and the population decrease in rural community by improving the environment and attracting urban inhabitants. A simulation on the costs and the local programs was operated from a point of view that Pension Insurance House with Long-term Lease and a plan for the program in connection with local resources should be accompanied to attract urban inhabitants. The study was carried out through mainly documents analysis and specialists' opinions. The simulation results are as follows. Firstly, the pre-existing rural housing development projects have only emphasized the hardware, while underestimated the post-management with operating programs. The software should be underlined when Pension Insurance House is developed. Secondly, as a result of the simulation on construction expenditure and the operating and maintenance cost for 30 years, about 82.3 million Wons are necessary residential expenses for 15 years per unit. Thirdly, in case of MUJU County, it has made the most of its pre-existing institutions. It's medical institutions provide medical care system with health education, facilities related leisure and culture offer recreational programs and the local community center and its program of each town helps new habitants adopt to the rural life. Additionally, the employment project of a local welfare center allow people living in a rural community to continue their careers with their talents and interests through local class programs for a life worth living. Lastly, guide for getting information of rural life, local community gathering and preliminary education should be carried out to reduce expectant tenants' incompatibility and assist them settle down early. The community program expansion is also required at the local government level.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.69-76
• /
• 2005

The performance of water-to-water heat pump system coupled with the ground source vertical heat exchanger is presented in this paper. The CAP program of Florida Heat Pump Co. is used to predict the heat pump performances while the EED program calculates the borehole fluid temperature. It is shown that COPH increases with decreasing the temperature of output water for the operation of heating mode and COPR increases with increasing temperature of output water for the operation of cooling mode. The value of specific heat extraction rate must be moderate to insure the reasonable installation cost of borehole system. With $1^{\circ}C$decrease of $T_{wo}$ the average COPH increase is estimated as about $0.06/^{\circ}C$(for $T_{wo}\;=\;45{\sim}60^{\circ}C$ range) while with $1^{\circ}C$ increase of $T_{wo}$ the estimation of COPR increase is about $0.13/^{\circ}C$(for $T_{wo}\;= \;5{\sim}11^{\circ}C$ range) at the specific heat extraction rate of 30W/m.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1681-1683
• /
• 2005

The molten carbonate fuel tell(MCFC) is endowed with the high potential especially in future electric power generation industry by its own outstanding characteristics. KEPCO(KEPRI) started a 100 kW MCFC system development program in 1993 and has been executed 100kW system develpilot plant successfully completed first phaseopment by 2005 on the basis of successful results of 25kW system development. In this program, the components and mechanical structure for 100 kW stack and system construction were completed on last year and now system pre-commissioning was being executed. A 100 kW MCFC power plant was constructed at the site of Boryeong Thermal Power Plant. A 100 kW MCFC system has characterized as a high pressure operation mode, $CO_2$ recycle, and externally reforming power generation system. The 100 kW MCFC system consisted with stacks which was made by two 50 kW sub-stacks, 90 cells with 6,000 cm2 active area and BOP including a reformer, a recycle blower, a catalytic burner, an inverter, and etc. The system will be operated under 3 atm pressure condition and expected to last over 5,000 hours by the end of this year.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1370-1376
• /
• 2015

Generally, an autotransformer(AT) feeding system consists of double tracks, up and down, with the trolley wire and feeder wire of the up and down tracks connected in the sectioning post(SP). Consequently, load current or fault current flows on two tracks based on catenary impedance characteristics, making it difficult to estimate catenary impedance accurately. This paper presents a technique for the estimation of catenary impedance using boosting current compensation based on the current division characteristics of an AT feeding system to improve the operation performance of impedance relay. To verify the technique, we model an AT feeding system through a power analysis program (PSCAD/EMTDC) and simulate various operation and fault conditions. Through the simulation, we confirmed that the proposed technique has estimated catenary impedance with a similar degree of accuracy to the actual catenary impedance