• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.111-119
• /
• 1991

This study was performed to investigate the effect of gold electrodepositoin on porcelain color of palladium-silver alloy. The specimens were made by firing porcelain on the metal plates cast respectively in Au-Pt alloy, and Pd-Ag alloy. In the case of Pd-Ag alloy specimens, porcelain were fired under three different conditions of the metal plate: 1) without gold coating, 2) firing opaque beforehand on one side, gold coating on the other side, 3) gold coating on both sides of the metal plate. Color change was measured with fiber-optic colorimeter(Model TC-6FX, Tokyo Denshoku Co., Japan). The obtained results were as follows: 1. In the group of firing opaque beforehand on one side and gold coating on the other side, there was no significant differences in their color in comparison to the color of the control group of the Au-Pt alloys. 2. In the group of gold coating on both sides on metal plate, there were no significant differences except their value to the group of firing poaque beforehand on one side and gold coating on the other side.

• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.125-132
• /
• 2012

Mercury oxidation in an SCR(selective catalytic reduction) catalyst was tested in this study with the conditions simulating the SCR system in full-scale coal-fired flue gas. A commercially available SCR catalyst was located in a temperature-controlled reactor system, and simulated gas was injected into the reactor. Mercury oxidation efficiency was determined from the difference between inlet and outlet elemental mercury concentrations. A control experiment was carried out with the gas composition of 12% $CO_{2}$, 5% $H_{2}O$, 5% $O_{2}$, 500 ppm $SO_{2}$, 400 ppm NO, 400 ppm $NH_{3}$, 5 ppm HCl, and 20 ${\mu}g/m^{3}$ Hg. Additional tests were conducted with different gas composition from the control condition to investigate the effect of gas composition on mercury oxidation in the SCR catalyst.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.179-184
• /
• 2002

To compare surface roughness in various porcelains and know effects of condensation, We used Ceramco dentin porcelain, Creation dentin porcelain, Creation margin porcelain, Vintage margin porcelain, Vintage dentin porcelain, and Vita dentin porcelain, and built up the powders with condensation or not, and then fired according to the instructions with porcelain furnace( Dekema, Germany ). We polished the samples step by step using the porcelain adjustment kit( Shofu Inc., Japan ), and then measured, compared and analysed Ra, Rz, and Rmax with Surftest SV-400( Mitutoyo Co., Japan ). 1. With condensation, roughness is significantly increased in Ceramco dentin porcelain (p<0.05) and decreased in Vita dentin porcelain(p<0.05). 2. In Ra, Vita dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, (p<0.05), and there is no difference under condensation. 3. In Rz, Vita dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, and Creation margin porcelain is significantly the roughest and Creation dentin porcelain is rougher than others under condensation(p<0.05). 4. In Rmax, Vintage dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, and Creation margin porcelain is significantly the roughest than others under condensation(p<0.05).

• 한국전자파학회지:전자파기술
• /
• 제12권3호
• /
• pp.12-24
• /
• 2001

최근에 이동통신 시스템의 다기능/고기능화에 따 라 여러 선진업체에서 RF부품의 모듈화 개발이 추 진되고 있으며, 이에 대응하여 LTCC를 이용한 MCM (Multi-Chip Module)적층기술의 개발이 확대되고 있 다. 이 기술은 세라믹기판 내부에 L, C, R등의 수 동소자를 3차원적으로 구성, 일체화할 수 있기 때문 에 이들 수동소자 뿐 아니라 세라믹 개별 부품으로 이용되고 있는 대역통과 여파기 및 바이어스라인, 임피던스 매칭 회로, 스트립라인등을 하나의 구조물 에 집적화 시킴으로써 제품의 소형화 및 대량생산 이 가능해진다. 본 논문에서는 LTCC를 활용한 고 집적 복합모듈 기술과 동향에 대한 개요 및 개발사례로서 적층 VCO 모듈의 제작에 대해 소개하기로 한다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.164-173
• /
• 2009

In this paper, two new circuit structures for European and U.S. ultra-wide band(UWB) bandpass filters(BPFs) with sharp roll-off characteristics are introduced. We show first that the ultra-wide bandpass property is obtained from a $\lambda$/4 open T resonator with a capacitively coupled $\lambda$/4 short-circuited line, which provides two attenuation poles at lower and upper cutoff frequencies. Then, two identical capacitively coupled input/output lines, which can be $\lambda$/4-length open ends or $\lambda$/2-length short ends, with the T-resonator, are adopted to suppress lower and higher frequency components outside of the pass band. There is coupling between the input and output lines providing two additional transmission zeros in the lower and upper transition bands of the filter. Since the coupling between the T-resonator with the $\lambda$/4 short-circuited line and the input/output lines limits the bandwidth of the filter to the European UWB band, both the $\lambda$/4 short-circuited line and the input/output lines are inserted between the two stacked T-resonators for the U.S. UWB band. The filter structures are simulated with ADS and HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.30-39
• /
• 2017

Interests in fuel cell based power generation systems are on the steady rise owing to various advantages such as high efficiency, ultra low emission, and potential to achieve a very high efficiency by a synergistic combination with conventional heat engines. In this study, the performance of a hybrid system which combined a molten carbonate fuel cell (MCFC) and an indirectly fired micro gas turbine adopting carbon dioxide capture technologies was predicted. Commercialized 2.5 MW class MCFC system was used as the based system so that the result of this study could reflect practicality. Three types of ambient pressure hybrid systems were devised: one adopting post-combustion capture and two adopting oxy-combustion capture. One of the oxy-combustion based system is configured as a semi-closed type, while the other is an open cycle type. The post-combustion based system exhibited higher net power output and efficiency than the oxy-combustion based systems. However, the semi-closed system using oxy-combustion has the advantage of capturing almost all carbon dioxide.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.71-71
• /
• 2003

최근 통신용 전자부품의 소형화, 저가격화, 고기능화의 요구가 점점 더 증대되고 있으며 이를 위해서 기판의 배선밀도를 높이는 것과 개별 부품 또는 모듈의 크기와 무게를 줄이는 것이 절실히 필요하다. 본 연구에서는 저융점의 phosphate계 유리 프릿의 첨가를 통해 LTCC (Low Temperature Co-fired Ceramic) 에 적용 가능한 조성을 개발하고자 하였다. 마이크로파 용 유전재료로서 널리 사용되고있는 BNT (BaO-Nd$_2$O$_3$-TiO$_3$) 계 세라믹스에 저융점 유리 프릿의 양을 10-30wt% 범위로 변화시키면서 900-110$0^{\circ}C$ 범위에서 소결하여 이에 따른 수축률 변화와 상대밀도의 변화를 조사하였다 유리 프릿으로 P$_2$O$_{5}$-ZnO-BaO-Nd$_2$O$_3$ 계, P$_2$O$_{5}$-SnO-ZnO 계 2가지 조성의 유리를 사용하였다 그 결과로 소결체의 상대밀도는 소성온도가 900-110$0^{\circ}C$ 로 증가함에 따라 85-96% 로 증가하였고, 그 수축률은 소결온도 100$0^{\circ}C$ 에서 급격히 증가하였다. 이러한 결과는 저온 동시소성 세라믹 조성의 사용을 위해 좋은 결과가 예상된다.

• Advances in materials Research
• /
• 제1권3호
• /
• pp.191-204
• /
• 2012

In this paper, we report on the obtention of nanocrystalline $SrMoO_4$ synthesized through modified combustion process. These powders were characterized by X-ray diffraction, Fourier Transform Raman and Infrared Spectroscopy. These studies reveal that the scheelite-type $SrMoO_4$ crystallizes in tetragonal structure with I41/${\alpha}$ (N#88) space group. Transmission electron microscopy image shows that the nanocrystalline $SrMoO_4$ powders have average size of 18 nm. The optical band gap determined from the UV-V is absorption spectra for the as prepared sample is 3.7 eV. These powders showed a strong green photoluminescence emission. The samples are sintered at a relatively low temperature of $850^{\circ}C$. The morphology of the sintered pellet is studied with scanning electron microscopy. The dielectric constant and loss factor values obtained at 5 MHz for a well sintered $SrMoO_4$ pellet has been found to be 9.50 and $7.5{\times}10^{-3}$ respectively. Thus nano $SrMoO_4$ is a potential candidate for low temperature co-fired ceramics and luminescent applications.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.85-92
• /
• 2005

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2002년도 하계학술대회 및 세미나
• /
• pp.17-20
• /
• 2002

본 논문에서는 세라믹 칩 안테나를 LTCC로 구현하여 다중 대역 특성을 얻는 방법을 제안하고 있다. 휴대용 단말기에 칩 안테나를 내장함으로 물리적 손상을 피하고 위치추적 시스템(GPS) 대역과 단말기 송수신용 대역, 즉 두 대역 이상 사용 가능하고 ${\varepsilon}_r=7.8$인 세라믹 칩 안테나를 LTCC(Low Temperature Co-fired Ceramic)공정을 이용하여 세라믹 칩 내부에 정합 회로를 구현하여 이중 대역 특성을 갖는 구조에 대해 논의하고 있다. 안테나의 전체 크기는 $16mm{\times}4mm{\times}2mm$ 이며 대역폭은 삽입손실 -10dB 기준 대략 1560MHz에서 2160MHz까지 약 600MHz정도이다. 측정은 접지면의 넓이가50mmx50mm이고 두께=0.7874mm, ${\varepsilon}_r=4.6$인 FR4 기판을 이용하여 측정한다.