• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1376-1378
• /
• 1999

Most conventional protection relays are based on processing information in the spectrum that is close to or at power frequency. It is, however, widely known that faults on transmission lines produce frequency components of a wide range In this respect, this paper describes the basis of a Protection technique for transmission lines which utilises high-frequency components. Fault-generated signals caused by post-fault and the signal derived from stack tuner is connected to the coupling capacitor of CVT. Digital signal processing is then applied to the captured information to determine whether the fault is inside or outside the Protected zone, and to discriminate the fault type on transmission line.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.282-287
• /
• 2004

Noise and vibrations in the pipe systems may be arisen from pumps. compressors, etc. The source mechanism is classified with the mechanical and hydraulic. Mechanical vibrations may be excited by the unbalance in rotating machinery. Hydraulic source may be generated in the turbulent flow. The vibro-acoustic behaviour of flexible, fluid-filled pipe system is a very complex and determined by two parameters: the frequency and the mass ratio of fluid and pipe wall. As the frequency increases, the mode number in the pipe increases. The mass ratio is close to one, the structure and the fluid are strongly coupled. In ease the diameter is very small to the length of pipe, the behaviour of pipe is same as a beam. The finite element formulation when the fluid and the structure are coupled is derived by using beam element. The Numerical results are compared with the package (Sysnoise) which is using the shell element.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.29-33
• /
• 2007

Low frequency (400 kHz) Ferrite ICP has been proposed for large area processing. Because the coupling coefficient is close to 1, the transformer matching can be adapted to Ferrite ICP. The transformer matching system is simple. In this paper the new matching system by controlling the turns of transformer using relays is proposed for impedance matching. We developed a simple matching system and characterized it when the turns were changed. It was observed that the 2-channel relay is available for transformer matching.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1390-1392
• /
• 2000

In this paper, a numerical calculation method based on CSM has been described. The electric field must be nonuniform even close to railway feed system. In that case, to calculate induced voltage, this paper uses the mutual capacitances between a conductor and railway feed system. The induced voltages of a conductor located at point (height=4m, distance=8m) near by railway feed system are calculated from 370V to 668V.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.850-858
• /
• 1995

Golden-rule like formulas have been used without theoretical basis to calculate the resonance lifetimes and final state distributions in the predissociation of van der Waals molecules. Here we present their theoretical basis by extending Fano's configuration interaction theory. Such extensions were independently done by Farnonux [Phys. Rev. 1985, 25, 287] but his work, unfortunately, was not well known outside some small group of people in the field of Auger spectroscopy. Since my extension is easier to understand than his, it is presented here. Theoretical basis of Golden rule like formulas used in the predissociation of van der Waals molecules was obtained by using such extensions. Factors responsible for several aspects of predissociation dynamics, such as variations of dynamics as functions of resonance lifetimes, or variations in shapes of final quantum state distributions of photofragments around resonances, were identified. Parameters, or dynamical information that could be obtained from the measurement of partial cross section spectra were accordingly determined. The theory was applied to the vibrational predissociation of triatomic van der Waals molecules and its result was compared with those calculated by close-coupling method. An example where Golden-rule like expression fails and branching ratios vary greatly around a resonance was considered.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.10
• /
• pp.957-968
• /
• 1995

Generalized Multichannel Quantum Defect theory (MQDT) was implemented to the vibrational predissociation of triatomic van der Waals molecules in the previous paper [Bull. Korean Chem. Soc, 12, 228 (1991)]. Implementation was limited to the calculation of the scattering matrix. It is now extended to the calculation of the predissociation spectra and the final rotational distribution of the photofragment. The comparison of the results with those obtained by other methods, such as Golden-rule type calculation, infinite order sudden approximation (IOS), and close-coupling method, shows that the implementation is successful despite the fact that transition dipole moments show more energy dependence than other quantum defect parameters. Examination of the short-range channel basis functions shows that they resemble angle-like functions and provide the validity of the IOS approximation. Besides the validity of the latter, only a few angles are found to play the major role in photodissociation. In addition to the implementation of MQDT, more progress in MQDT itself is made and reported here.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.297-313
• /
• 2012

This paper is intended to show the robustness and capabilities of a coupled boundary element-finite element technique for the analysis of vibrations generated by high-speed trains under different geometrical, mechanical and operation conditions. The approach has been developed by the authors and some results have already been presented. Nevertheless, a more comprehensive study is presented in this paper to show the relevance and robustness of the method which is able to predict vibrations due to train passage at the vehicle, the track, the free-field and any structure close to the track. Local soil discontinuities, underground constructions such as underpasses, and coupling with nearby structures that break the uniformity of the geometry along the track line can be represented by the model. Non-linear behaviour of the structures can be also considered. Results concerning the excitation mechanisms, track behaviour and sub-Rayleigh and super-Rayleigh train speed are summarized in this work.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.329-335
• /
• 2021

The problem of polarized light scattering by a cylinder on or close to a planar substrate is analytically solved. The light is assumed to be normally incident to the axis of the cylinder. Transverse magnetic (TM) and transverse electric (TE) polarizations are treated separately. The solution for each polarization is composed of a coupled set of linear equations which couples the scattering characteristics of the cylinder and the planar substrate. The coupling comes from the scattering by the planar substrate and by the cylinder. The solution of the coupled set of equations obtained by iterative substitution consists of infinite series, where each term represents the contribution of single and multiple scatterings of all orders.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.17-17
• /
• 2003

Semiconductors with ferromagnetism at room temperature has been actively searched for in recent years; a prospect of devices using both charge and spin continuously gives impetus to the activities. Transition metal doped oxide materials have been of particular interest. Co substituted ZnO [1] and TiO$_2$ [2] thin films, for example, were reported to show ferromagnetic properties at room temperature. However, various studies do not seem to converge on a definite picture [3,4,5]. The issue is rather fundamental: whether a system shows ferromagnetic properties at all, and in case it does, whether the system possesses a close coupling between magnetism and transport properties. In this talk, we shall assess the current status of transition metal doped oxide materials as room temperature ferromagnetic semiconductors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.75-82
• /
• 2010

Korea has made a plan to allocate CH 14~CH 51 (470 MHz~698 MHz) for DTV. This paper assumes that DTV operates on CH 51 (692 MHz~698 MHz) and CDMA system operates on CH 52 (698 MHz~704 MHz) in spare band. Minimum Coupling Loss (MCL) method to get protection distance and Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) to get guard band through 5 % interference probability are used. The protection distance is required to be 665.67 km at close frequency offset of 698.625 MHz between DTV transmitter and CDMA Base Station (BS) receiver. The required guard band between DTV transmitter and CDMA Mobile Station (MS) receiver is 5 MHz for the worst case of rural environment. There is no serious impact between CDMA MS transmitter and DTV receiver. The required guard band between CDMA BS transmitter and DTV receiver is 6.25 MHz for the worst case of urban environment. The analysis results may offer a reference and be helpful for considering interference between DTV and other communication systems.