• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.296-302
• /
• 2018

Purpose: The aim of this study was to determine appropriate threshing and selection conditions for sorghum harvesting using a rice combine-harvester. Methods: Sorghum harvesting performance was tested using an actual rice combine. Through this test, the grain loss rate and the composition of crops according to the engine and fan speeds of the combine were investigated. Furthermore, the optimal threshing and selection conditions were determined by carrying out a harvest test based on the opening size factor of the concave in a test field. Results: The grain loss rate for the sorghum using a concave ($18{\times}18mm$) of the rice combine was the lowest at 0.1% at a chaffer angle of $40^{\circ}$, engine speed of 2000 rpm, and fan speed of 20 m/s, but the sorting sieve clogged frequently. Furthermore, as the engine speed and fan speed increased, the grain loss rate also increased. The sorghum harvesting test results of the combine according to the concave opening size showed that the grain loss rate was 0.5% at a driving speed of 0.5 m/s, with a concave opening diameter of 13 mm, a chaffer angle of $40^{\circ}$, a concave sieve oscillation frequency of 4.8 Hz, a fan speed of 20 m/s, and an engine speed of 2000 rpm. Conclusions: Findings showed that sorghum could be harvested using a head feeding rice combine.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.265-274
• /
• 2019

Background: Methyl alcohol poisoning in mobile phone-manufacturing factories during 2015-2016 was caused by methyl alcohol use for cleaning in computerized numerical control (CNC) processes. To determine whether there were health complications in other workers involved in similar processes, the Occupational Safety and Health Research Institute conducted a survey. Methods: We established a national active surveillance system by collaborating with the Ministry of Employment and Labor and National Health Insurance Service. Employment and national health insurance data were used. Overall, 12,048 employees of major domestic mobile phone companies and CNC process dispatch workers were surveyed from 2016 to 2017. We investigated methyl alcohol poisoning by using the national health insurance data. Questionnaires were used to investigate diseases due to methyl alcohol poisoning. Results: Overall, 24.9% of dispatched workers were employed in at least five companies, and 23.9% of dispatched workers had missing employment insurance history data. The prevalence of blindness including visual impairment, optic neuritis, visual disturbances, and alcohol toxicity in the study participants was higher than that reported in the national health insurance database (0.02%, 0.07%, 0.23%, and 0.03% versus 0.01%, 0.07%, 0.13%, and 0.01%, respectively, in 2015). Moreover, 430 suspicious workers were identified; 415 of these provided an address and phone number, of whom 48 responded (response rate, 11.6%). Among the 48 workers, 10 had diseases at the time of the survey, of whom 3 workers were believed to have diseases related to methyl alcohol exposure. Conclusion: This study revealed that active surveillance data can be used to assess health problems related to methyl alcohol poisoning in CNC processes and dispatch workers.

• 한국간호교육학회지
• /
• 제27권2호
• /
• pp.175-185
• /
• 2021

Purpose: The aim of this study was to identify core keywords and topic groups in the 'Gestational diabetes mellitus (GDM) and Breastfeeding' field of research for better understanding research trends in the past 20 years. Methods: This was a text-mining and topic modeling study composed of four steps: 1) collecting abstracts, 2) extracting and cleaning semantic morphemes, 3) building a co-occurrence matrix, and 4) analyzing network features and clustering topic groups. Results: A total of 635 papers published between 2001 and 2020 were found in databases (Web of Science, CINAHL, RISS, DBPIA, RISS, KISS). Among them, 3,639 words extracted from 366 articles selected according to the conditions were analyzed by text network analysis and topic modeling. The most important keywords were 'exposure', 'fetus', 'hypoglycemia', 'prevention' and 'program'. Six topic groups were identified through topic modeling. The main topics of the study were 'cardiovascular disease' and 'obesity'. Through the topic modeling analysis, six themes were derived: 'cardiovascular disease', 'obesity', 'complication prevention strategy', 'support of breastfeeding', 'educational program' and 'management of GDM'. Conclusion: This study showed that over the past 20 years many studies have been conducted on complications such as cardiovascular diseases and obesity related to gestational diabetes and breastfeeding. In order to prevent complications of gestational diabetes and promote breastfeeding, various nursing interventions, including gestational diabetes management and educational programs for GDM pregnancies, should be developed in nursing fields.

• 한국물환경학회지
• /
• 제37권5호
• /
• pp.398-404
• /
• 2021

The use of water purifiers has been increasing every year due to increased drinking water safety concerns raised by the water pollution accidents occasionally reported. Currently, more than 10 million water purifiers have been distributed in Korea, and the estimation of the purifier sales reaches two million units per year. As a result, the number of used water purifier filters that must be replaced on a regular basis has gradually increased. However, regardless of the considerations for the capacity of used filters remaining, water purifier filters were replaced and collected at regular intervals. The high cost of disposal of the used filters by landfill or incineration were required. Thus, in this study, the current status and trends of recycling technologies for used water purifier filters were reviewed. It is noted that there was insufficient statistical data to understand the current status of the difference between the number of used water filters discarded and the number of those recycled. Most studies on the recycling of old water purifier filters have concentrated on pretreatment and cleaning methods for sediment filters and membrane filters, with the goal of extending the lifespan of used filters. Further, the study suggested future study directions on the recycling of used water purifier filters, which could be useful information on establishing environmental policy to promote the recycling of used filters.

• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.676-684
• /
• 2020

Objectives: In this study, the extent of environmental exposure reduction behavior among the elderly living in Gongju City was identified according to demographic and sociological characteristics of individual health behavior and environmental factors. In addition, the relationship between subjective health knowledge and environmental exposure reduction behavior among the elderly was investigated. Methods: Demographic and sociological factors, subjective health status, environmental factors, and environmental exposure reduction behavior were investigated among 120 elderly people in Gongju City. Through multiple regression analysis, variables with significant relationships with environmental exposure reduction behavior were identified (SPSS ver. 22, IBM, Armonk, NY, USA). The survey (IRB-2018-0096) was conducted over about two weeks (from Dec. 3 to 14, 2018). Results: The extent of practicing environmental exposure reduction behavior by the elderly in Gongju City was high in terms of cleaning, ventilation when cooking food, periodic outdoor activities, and ventilation when smoking. Significant variables were gender, past smoking and current non-smoking, subjective health knowledge, and subjective health status. The most influential variable was subjective health knowledge (β= .411). Conclusion: There was a significant relationship between the level of subjective health knowledge and the level of objective education for health behavior related to the reduction of environmental exposure among the elderly.

• 한국주조공학회지
• /
• 제41권2호
• /
• pp.139-143
• /
• 2021

타이타늄 합금 중 페로-타이타늄은 철강 업계에서 철강과 스테인리스강을 생산하는데 사용되는 주요 첨가물이다. 본 연구에서는 고품질의 페로-타이타늄 합금을 주조하기 위해 경제적인 면을 고려한 저비용 타이타늄 스크랩을 활용하고자 하였다. 먼저 재활용 타이타늄 스크랩의 표면에 형성되어 있는 절삭유 및 불순물을 제거하기 위한 최적의 전처리 공정을 연구하였다. 일반적인 세척 방법인 산이나 유기용제는 세척이 용이하나 환경적으로 문제가 되므로 친환경적인 방법을 고안하여 적용하고자 하였다. 또한, 타이타늄 스크랩을 활용하여 고품질의 페로-타이타늄 잉곳을 제조하고 성분 분석을 통해 불순물과 특성을 상용 소재 규격과 비교 분석하였다.

• 한국치위생학회지
• /
• 제21권4호
• /
• pp.441-453
• /
• 2021

Objectives: This study identified problems and improvements in projects targeted to dental workers in a child-adolescent dental care service. Methods: The subjects were 40 dentists, 43 dental hygienists, and 51 others who participated in service in Seoul. A self-administered questionnaire was used to address the problems and improvements in the project. Descriptive statistics, chi-square test, and one-way analysis of variance were performed using SPSS 23.0. Results: Oral examination was performed by 99.2% of dentists, and some service items such as professional tooth cleaning, fluoride application, and scaling were performed by dental auxiliary personnel regardless of legal duties. The problem was that the subjects took a lot of time in providing services, and students or guardians participating in the project refused to receive preventive dental services. As regards improvements, the insurance fee was the highest (48.1%), followed by the provision of regular services (38.8%), and system improvement and administrative support (35.7%). Conclusions: To activate a child-adolescent dental care service, it is thought that continuous efforts such as providing financial support by the government, education to increase participants' understanding, and social consensus for the participation of service providers and beneficiaries are required.

• 멤브레인
• /
• 제32권2호
• /
• pp.100-108
• /
• 2022

다양한 산업 중에서 섬유 산업은 섬유 염색을 위해 가장 많은 양의 물을 사용하는데, 이는 여러 종류의 염료를 포함한 폐수의 방대한 배출로 이어진다. 염료의 제거를 위한 방법에는 오존 처리, 흡착 등의 다양한 처리 방법이 존재한다. 하지만 이러한 처리 방법은 폐수 재사용의 문제로 인해 처리 가격이 상승하기 때문에 성공적이지 못하다. 이에 대한 대안으로 막분리 공정이 폐수의 염료 처리를 위한 가장 적절한 기술로 보고되고 있다. 이때 사용되는 분리막은 고분자 분리막과 세라믹 분리막으로 나눌 수 있다. 세라믹 분리막의 장점에는 세척의 용이함, 긴 수명, 내열성, 내화학성, 그리고 기계적 안정성이 있다. 세라믹 분리막은 다양한 원료로 만들 수 있으며, 점토, 제올라이트, 플라이 애시와 같은 천연 재료는 저렴하고 구하기 용이하다. 본 리뷰에서 폐수처리는 크게 한외여과(ultrafiltration), 정밀여과(microfiltration), 그리고 나노여과(nanofiltration) 세가지 공정으로 나누어져 있다.