• Elastomers and Composites
• /
• v.58 no.4
• /
• pp.208-215
• /
• 2023

In this study, the properties of polyurethane-polydimethylsiloxane (PU-PDMS) hybrid foams containing different types and contents of physical blowing agents (PBAs) were investigated. Two types of blowing agents, namely physical blowing agents and thermally expandable microspheres (TEM), were applied. The apparent density was measured using precisely cut foam samples, and the pore size was measured using image software. In addition, the microstructure of the foam was confirmed via scanning electron microscopy and transmission electron microscopy. The thermal conductivities related to the microstructures of the different foams were compared. When 0.5 phr of the hydrocarbon-based PBA was added, the apparent density and pore size of the foam were minimal; however, the pore size was larger than that of neat foam. In contrast, the addition of 3 phr of TEM effectively reduced both the apparent density and pore size of the PBAs. The increase in resin viscosity owing to TEM could enhance bubble production stability, leading to the formation of more uniform and smaller pores. These results indicate that TEM is a highly efficient PBA that can be employed to decrease the weight and pore size of PU-PDMS hybrid foams.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.247-252
• /
• 2012

This study examined the control effects of amino acid biochemical agent extracted from chicken feathers on Meloidogyne incognita for the purpose of developing an environmentally friendly nematicidal agent that can replace chemical control of root-knot nematodes (RKN). We investigated the lethal effects of J2 juveniles for 19 types of commercial amino acids. As a result, five kinds of amino acids (L-asparagine, L-aspartic acid, L-methionine, L-tyrosine, L-cysteine) showed mortality rate of more than 50% at a concentration of 50 mM. L-asparagine showed the highest mortality rate at 94%. We also investigated the lethal effect of J2 juveniles and suppressive effects of egg hatching by feather amino acids (FAA) biochemical agent. It showed that the mortality rate of J2 juveniles was more than 80% and suppression rate of egg hatching was 74% at 1/50 concentrations of FAA. As a result of conducting a tomato pot culture experiment for 60 days after treating 1/50 concentrations of FAA biochemical agent in rhizosphere soil, it showed that the control effects were 63% of juveniles density in the soil, 59% of egg mass and 61% of root gall index, respectively. Based on the above results, it is considered that the FAA biochemical agent extracted from chicken feathers can be used as an environmentally friendly nematicidal agent of RKN.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.95.2-96
• /
• 2003

In order to develop a new microbial fungicide for the control of vegetable diseases using endophytic bacteria, a total of 260 bacterial strains were isolated from fresh tissues of 5 plant species. After they were cultured in broth media, their antifungal activities were screened by in vivo bioassays against Botrytis cinerea(tomato gray mold), Pythium ultimum(cucumber damping-off), Phytopkhora infestans(tomato late blight), Colletotrichum orbiculare(cucumber anthracnose), and Blumeria graminis f. sp. hordei(barley powdery mildew). As the results of screening, 38 bacterial strains showed potent antifungal activities against at least one of 5 plant pathogens. A bacterial strain EB072 displayed potent disease control activities against 3 plant diseases. Among the bacterial strains with a potent antifungal activity against cucunlber anthracnose, three bacterial strains, EB054, EB151 and EB215, also displayed a potent in vitro antifungal activity against C. acutatum, a fungal agent causing pepper anthracnose. A bacterial strain EB215 obtained from roots of cucumber was identified as Burkholderia cepacia based on its physiological and biochemical characteristics and 165 rRNA gene sequence. An antifungal substance was isolated from the liquid cultures of B. cepacia EB215 strain by ethyl acetate partitioning, repeated silica gel column chromatography, and invitro bioassay, Its structural determination is in progress by various instrumental analyses.

• Clean Technology
• /
• v.20 no.3
• /
• pp.212-217
• /
• 2014

In order to regenerate the sulfidated desulfurization sorbent, oxygen is used as the oxidant agent on the regeneration process. The small amount of oxygen un-reacted in regeneration process is flowed into direct sulfur recovery process. However, the reactivity for $SO_2$ reduction can be deteriorated with the un-reacted oxygen by various reasons. In this study, the deactivation effects of un-reacted oxygen contained in the off-gas of regeneration process flowed into direct sulfur recovery process of hot gas desulfurization system were investigated. Sn-Zr based catalysts were used as the catalyst for $SO_2$ reduction. The contents of $SO_2$ and $O_2$ contained in the regenerator off-gas used as the reactants were fixed to 5.0 vol% and 4.0 vol%, respectively. The catalytic activity tests with a Sn-Zr based catalyst were for $SO_2$ reduction performed at $300-450^{\circ}C$ and 1-20 atm. The un-reacted oxygen oxidized the elemental sulfur produced by $SO_2$ catalytic reduction and the conversion of $SO_2$ was reduced due to the production of $SO_2$. However, the temperature for the oxidation of elemental sulfur increased with increasing pressure in the catalytic reactor. Therefore, it was concluded that the decrease of reactivity at high pressure is occurred by catalytic deactivation, which is the re-oxidation of lattice oxygen vacancy in Sn-Zr based catalyst with the un-reacted oxygen on the catalysis by redox mechanism. Meanwhile the un-reacted oxygen oxidized CO supplied as the reducing agent and the temperature in the catalyst packed bed also increased due to the combustion of CO. It was concluded that the rapidly increasing temperature in the packed bed can induce the catalytic deactivation such as the sintering of active components.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.25-31
• /
• 2012

In the synthesis of nanoparticles (NPs) via wet chemical reduction using tin(II) acetate precursor, the effects of green reducing agents (sugar) and a capping agent (gelatin) on the formation of NPs were analyzed as functions of synthesis conditions and time. When glucose was used as the reducing agent, it was observed that irregular chainlike shapes, aggregates of NPs, were formed during the synthesis at $70-110^{\circ}C$. The NPs were determined as $SnO_2$ from the fast Fourier transform (FFT) pattern. In the synthesis at $110^{\circ}C$ by using sucrose, fine spherical NPs of ~10 nm in diameter were formed after the synthesis time of 3 h. As the time increased to 9 h, the chainlike NP aggregates besides irregularly aggregated spherical NPs were also formed locally. However, the chainlike NP aggregates were only observed when the synthesis was conducted at $130^{\circ}C$. The spherical NPs and chainlike NP aggregates were analyzed to be pure Sn and $SnO_2$, respectively.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.53-59
• /
• 2021

When using Medical Information Retrieval services, a typical retrieval method is to use the Anatomic Therapyutic Chemical Classification (ATC) code. Traditional ATC code-based medical information retrieval is very useful for single ingredient product retrieval with single ingredient. However, in the case of complex, retrieval errors often occur. The cause of this problem is that ATC code-based retrieval proceeds by pattern matching ATC code.In this work, we design the mapping scheme based on ATC code by analyzing the requirement scenarios for retrieval based on main ingredient in ATC code-based retrieval. the mapping scheme based on ATC is a schema that stores the ATC code of the complex and all the ATC code of the single agent included in the complex. ATC code-based retrieval using this schema retrieves a complex as ingredient of a single ingredient product, thus having higher accuracy than existing methods. the mapping scheme based on ATC is expected to increase the efficiency of doctors' prescription of patients and increase the accuracy of drug safety use services.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.40-44
• /
• 2003

Soil-borne infectious disease including Pythium aphanidermatum and Rhizoctonia solani causes severe damage to plants, such as cucumber. This soil-borne infectious disease was not controlled effectively by chemical pesticide. Since these diseases spread through the soil, chemical agents are usually ineffective. Instead, biological control, including antagonistic microbe can be used as a preferred control method. An efficient method was developed to select an antagonistic strain to be used as a biological control agent strain. In this new method, surface tension reduction potential of an isolate was included in the ‘decision factor’ in addition to the other factors, such as growth rate, and pathogen inhibition rate. Considering these 3 decision factors by a statistical method, an isolate from soil was selected and was identified as Bacillus sp. GB16. In the pot test, this strain showed the best performance among the isolated strains. The lowest disease incidence rate and fastest seed growth was observed when Bacillus sp. GB16 was used. Therefore this strain was considered as plant growth promoting rhizobacteria (PGPR). The action of surface tension reducing component was deduced as the enhancement of wetting, spreading, and residing of antagonistic strain in the rhizosphere. This result showed that new selection method was significantly effective in selecting the best antagonistic strain for biological control of soil-borne infectious plant pathogen. The antifungal substances against P. aphanidermatum and R. solani were partially purified from the culture filtrates of Bacillus sp. GB16. In this study, lipopeptide possessing antifungal activity was isolated from Bacillus sp. GB16 cultures by various purification procedures and was identified as a surfactin-like lipopeptide based on the Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), high performance liquid chromatography mass spectroscopy (HPLC-MS), and quadrupole time-of-flight (Q-TOF) ESI-MS/MS data. The lipopeptide, named GB16-BS, completely inhibited the growth of Pythium aphanidermatum, Rhizoctonia solani, Penicillium sp., and Botrytis cineria at concentrations of 10 and 50 mg/L, respectively. A novel method to prevent the foaming and to provide oxygen was developed. During the production of surface active agent, such as lipopeptide (surfactin), large amount of foam was produced by aeration. This resulted in the carryover of cells to the outside of the fermentor, which leads to the significant loss of cells. Instead of using cell-toxic antifoaming agents, low amount of hydrogen peroxide was added. Catalase produced by cells converted hydrogen peroxide into oxygen and water. Also addition of corn oil as an oxygen vector as well as antifoaming agent was attempted. In addition, Ca-stearate, a metal soap, was added to enhance the antifoam activity of com oil. These methods could prevent the foaming significantly and maintained high dissolved oxygen in spite of lower aeration and agitation. Using these methods, high cell density, could be achieved with increased lipopeptide productivity. In conclusion to produce an effective biological control agent for soil-borne infectious disease, following strategies were attempted i) effective screening of antagonist by including surface tension as an important decision factor ii) identification of antifungal compound produced from the isolated strain iii) novel oxygenation by $H_2O_2-catalase$ with vegetable oil for antifungal lipopeptide production.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7567-7573
• /
• 2015

Background: Catastrophic effects of mustard gas as a chemical warfare agent have always been a major problem for those exposed to this agent. In this meta-analysis it was tried to evaluate carcinogenesis, ocular, cutaneous and respiratory complications of mustard gas exposure among Iranians who had been exposed to this agent during the Iran-Iraq war. Materials and Methods: In this meta-analysis, the required data were collected using keywords "mustard gas", "sulfur mustard", "cancer", "neoplasm", "respiratory complications", "ocular complications", "lung disease", "chronic complication", "eye", "skin", "cutaneous complication", "carcinogenesis" and their combination with keywords "Iran", "Iranian", "prevalence", "mortality" and their Farsi equivalent terms from the databases of SID, Iranmedex, Magiran, Pubmed, Science Direct, Google Search engine, Gray Literature and Reference of References. To determine the prevalence of each complication and perform meta-analysis, CMA: 2 (Comprehensive Meta-Analysis) software with a randomized model was used. Results: Of the 542 articles found, 7 national articles, consistent with the aims of this study were selected. Meta-analysis of seven papers revealed that cancer risk, especially cancer of the respiratory system was elevated, so that the relative risk (RR) of cancer role of mustard gas was inconsistent from 2/1 to 4 in this survey. Also prevalence of delayed skin disorders due to sulfur mustard was 94.6%, pulmonary complications 94.5% and ocular complications 89.9%. The incidence of various cancers in victims exposed to mustard gas was 1.7% worldwide where the rate was 2.2% in Iranian victims of the Iraq-Iran war. Conclusions: Based on present study the prevalence of delayed mustard gas related cutaneous, pulmonary and ocular complications is above 90% and risk of carcinogenesis is higher in comparison to worldwide statistics. This may suggest need for long-term and persistent follow-up and rehabilitation procedures for populations exposed to this agent.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.5-12
• /
• 2014

Weatherstrip coatings of urethane and silicon type which are fit to EPDM and thermoplastic materials are used in sealing systems for automotive applications for noise reduction and high slip characteristics for external applications, respectively. Polyurethane binder was successfully synthesized from poly(butyladiphate)diol (PBAD), poly(tetramethylene)glycol (PTMG) and isocyanate as starting materials. Then, polyurethane coating agents were prepared by using various additives. To investigate effects of segment types on the abrasion resistance of polyurethane coating agents, thin films based on polyurethane coating materials were fabricated. With increasing the amount of hard segment in the coating agent, abrasion resistance, modulus and tensile strength of the coating films were improved, but the elongation of the coating films was decreased.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.288-296
• /
• 2009

In this study, the silica-based hybrid material with high barrier property was prepared by incorporating ethylene-vinyl alcohol (EVOH) copolymer, which has been utilized as packaging materials due to its superior gas permeation resistance, during sol-gel process. In preparation of this EVOH/$SiO_2$ hybrid coating materials, the (3-glycidoxy-propyl)-trimethoxysilane (GPTMS) as a silane coupling agent was employed to promote interfacial adhesion between organic and inorganic phases. As confirmed from FT-IR analysis, the physical interaction between two phases was improved due to the increased hydrogen bonding, resulting in homogeneous microstructure with dispersion of nano-sized silica particles. However, depending on the range of content of added silane coupling agent (GPTMS), micro-phase separated microstructure in the hybrid could be observed due to insufficient interfacial attraction or possibility of polymerization reaction of epoxide ring in GPTMS. The oxygen barrier property of the mono-layer coated BOPP (biaxially oriented polypropylene) film was examined for the hybrids containing various GPTMS contents. Consequently, it is revealed that GPTMS should be used in an optimum level of content to produce the high barrier EVOH/$SiO_2$ hybrid material with an improved optical transparency and homogeneous phase morphology.