• Computational Structural Engineering : An International Journal
• /
• 제1권1호
• /
• pp.31-38
• /
• 2001

In the case of the non-proportionally damped system such as the soil-structure interaction system, the structural control system and composite structures, the eigenproblem with the damping matrix should be necessarily performed to obtain the exact dynamic response. However, most of the eigenvalue analysis methods such as the subspace iteration method and the Lanczos method may miss some eigenvalues in the required ones. Therefore, the eigenvalue analysis method must include a technique to check the missed eigenvalues to become the practical tools. In the case of the undamped or proportionally damped system the missed eigenvalues can easily be checked by using the well-known Sturm sequence property, while in the case of the non-proportionally damped system a checking technique has not been developed yet. In this paper, a technique of checking the missed eigenvalues for the eigenproblem with the damping matrix is proposed by applying the argument principle. To verify the effectiveness of the proposed method, two numerical examples are considered.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.657-664
• /
• 2011

This paper shows a whole noise quality checking system for the new developed 6th speed automatic transmission manufactured in USA. Due to demand for manufacturing of the high NVH quality transmissions in the mass product line, some special checking system called EOL NVH is adapted. This EOL system is using vibration sensor and analysis technologies. Through adapting vibration analysis technologies and functions likewise RMS, crest factor, harmonics, peak, band and order tracking, various noise problems caused by wear, nick and deformations could be successfully detected and predicted. Therefore, automatic transmissions manufactured in the USA could get high NVH quality. The developing process described in this paper and results on EOL system will offer good guides to the engineers who built the next transmission factory.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1241-1246
• /
• 2004

The verification confirms a correspondence between requirements and a specification before implementing. The problem in the formal method verifying a protocol specification using model checking is that the protocol behaviors must be always specified in L TS(Label Transition System). But if Region Automata is applied to the model checking, it is enable to verify whether properties are true on specification specified in I/O FSM(Input/Output Finite State Machine) as well as LTS. In this paper, we verify the correctness of rail signal control protocol type 1 specified in I/O FSM by using model checking method and region automata. This removes many errors and ambiguities of an informal method used in the past and saves down expenditures and times required in the protocol development. Therefore it is expected that there will be an increase in safety, reliability and efficiency in terms of the maintenance of the signaling system by using the proposed verification methods.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.1342-1345
• /
• 2011

A valid scenario generation is essential for model checking software. This paper suggests an automated scenario generation technique through the analysis of function called-by graphs and call graphs of the program source code. We provide the verification process including the scenario generation and show application results on the Trampoline operating system using CBMC as a back-end model checker.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권10호
• /
• pp.518-524
• /
• 2002

A software system that has functions of setting and coordination checking of protective relays in power transmission system has been developed. The developed system utilizes database system to store the setting values of protective relays, power system parameters, checks the relay operation and evaluates coordination of relays in real Power system or test system. The fault data to simulates a fault to evaluate the coordination of relays is generated by PSS/E and EMTP. A universal logic generator module is added to adopt the variation of each relay＇s trip logic. The proposed system has been verified through many tests in the case study, and proved to be very powerful in inspecting the setting values and coordination of relays.

• 한국멀티미디어학회논문지
• /
• 제3권1호
• /
• pp.77-90
• /
• 2000

실시간 검증은 명세와 요구사항과의 논리적 정확성 뿐만 아니라 시간적 정확성을 확인하는 일련의 과정이다. 하지만 시간의 무한성에 의해 시스템 상태가 무한히 증가할 수 있는 상태 폭발 문제가 검증과정에서 중요한 문제점이 되고 있다. 본 논문에서는 형식 검증에 기반을 두며, 시스템의 행위 측면을 시간 오토마타로 기술한 시스템 모델이 Timed mu-calculus로 표현된 시스템의 특성에 만족하는지의 여부를 통해 명세의 완전성을 확인하는 실시간 검증 비법을 기술한다. 이를 위해 초기상태의 논리값에 초점을 두어 검증과정에서 필요로 하는 노드로만 Product Graph를 구성하여 노드 값을 결정해나가는 지역모형검사 기법에 대해 제안한다. 이 방법은 모델의 모든 상태를 조사하지 않으므로 상태 폭발 문제를 최소화 시킬 수 있어 실시간 시스템 검증에 효과적으로 적용이 가능하다.

• 한국정보과학회논문지:데이타베이스
• /
• 제34권6호
• /
• pp.493-502
• /
• 2007

지식을 효과적으로 표현하고 검색하는 방법에 대한 관심이 증가함에 따라, 토픽맵을 비롯한 지식 표현 기법들이 점점 중요해지고 있다. 토픽맵은 지식을 구조화하여 표현하게 되는데 지식은 매우 복잡한 의미적 관계를 포함하고 있기 때문에 이를 의미적으로 일관성 있게 유지, 관리하는 것은 매우 중요한 문제가 된다. 현재 토픽맵 무결성 검사를 위하여 TMCL을 비롯한 여러 토픽맵 제약 조건 언어와 시스템들이 제안되었다. 그러나 이들은 단순한 의미적 제약들에 대해 지원하고 있지만, 의존성과 같은 복잡한 제약들에 대한 것들은 다루고 있지 못하다. 또한, 단순히 응용 레벨에서 제약들을 검사함으로써 좋지 않은 성능을 보인다. 이에 본 논문에서는 기존의 정보 시스템 분야 및 관련 분야에서 제공하고 있는 제약 언어들의 특성을 기반으로 TMCL을 확장하였다. 또한 이를 효율적으로 지원하기 위한 관계형 데이타베이스기반의 토픽맵 무결성 검사 기법을 제안하고 구현하였다. 구현한 시스템에서는 TMCL에서 제공하고 있는 기본적인 토픽맵 제약 조건들뿐만 아니라 의존성과 같은 복잡한 형태의 제약도 다루고 있다. 그리고 각각의 제약 조건을 검사할 때 템플릿을 이용하여 질의를 생성시켜 효율적인 무결성 검사가 가능하게 함으로써 기존 시스템들의 검사 방식에 비해 높은 성능을 보임을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.306-314
• /
• 1996

A seeder monitoring system was developed to solve the problems of mis-sowing and tube clogging in direct seeding machines, which have been one of the factors that reduce the performance of sowing operations. The system consisted of photo sensors, air nozzles, an air compressor, and a one-chip micro-computer based controller. The system was also equipped with the devices that perform the functions of self-checking and intermittent air injection for cleaning seed tubes. The performance of the system was tested in the laboratory and field. Using the well-cleaned rice seed, the average time for checking the mis-sowing was 1.37 seconds in the field and 1.2 seconds in the laboratory without any malfunction. Overall evaluation of the system indicated that the system can be utilized for seeding machines not only for paddies but beans and corns.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2156-2159
• /
• 1998

This paper describes a Battery Checking & Monitoring System for monitoring battery cell and power system in Uninterruptible Power Supplies(UPS). The system is capable of measuring, in a matter of setting time, float and discharge voltage of up to 240 cells in a single installation, and has the memory capacity to store battery's alarm data information on up to 200 separate sites. This system are easy to maintain and attain cost effectively, so that prepared for meeting the customer's service needs immediately. The system is additionally programmed with a each model, that will enable to accurately determine the remain battery capacity in a UPS system following a short discharge test. It is also equipped with remote interrogation and control facilities.

• 산업공학
• /
• 제24권1호
• /
• pp.71-77
• /
• 2011

Design works consist of essential works and subsidiary works. Essential design works means designing creative ideas and productive ideas, while subsidiary design works means helping essential works those are making data tables and specification sheets, checking CAD data's integrity. Subsidiary design works forms the bulk of the whole design process and affects the time limit of delivery. Therefore we propose the automatic data matching system for CAD data's integrity. Proposed system is automatic system supporting subsidiary design works. The data matching system consists of three parts; 1) automatic generation of data tables 2) supporting module for checking CAD data's integrity between Drawings 3) automatic generation of spec. sheets. Developed system was tested in LCD equipment manufacture company and was found to be useful system.