• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.384-387
• /
• 1999

In this paper, we have proposed a testing methodology for Speed-Independent asynchronous control circuits using the self-checking property where the circuit detects certain classes of faults during normal operation. To exploit self-checking properties of Speed-Independent circuits, the Proposed methodology generates tests from the specification of the target circuit which describes the behavior of the circuit. The generated tests are applied to a fault-free and a faulty circuit, and target faults can be detected by the comparison of the outputs of the both circuits. For the purpose of efficient comparison, reachability information of the both circuits in the form of BDD's is used and operations are conducted by BDD manipulations. The identification for undetectable faults in testing is also used to increase efficiency of the proposed methodology. The proposed identification uses only topological information of the target circuit and reachability information of the good circuit which was generated in the course of preprocess. Experimental results show that high fault coverage is obtained for synthesized Speed-Independent circuits and the use of the identification process decreases the number of tests and execution time.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.31-38
• /
• 2001

In the case of the non-proportionally damped system such as the soil-structure interaction system, the structural control system and composite structures, the eigenproblem with the damping matrix should be necessarily performed to obtain the exact dynamic response. However, most of the eigenvalue analysis methods such as the subspace iteration method and the Lanczos method may miss some eigenvalues in the required ones. Therefore, the eigenvalue analysis method must include a technique to check the missed eigenvalues to become the practical tools. In the case of the undamped or proportionally damped system the missed eigenvalues can easily be checked by using the well-known Sturm sequence property, while in the case of the non-proportionally damped system a checking technique has not been developed yet. In this paper, a technique of checking the missed eigenvalues for the eigenproblem with the damping matrix is proposed by applying the argument principle. To verify the effectiveness of the proposed method, two numerical examples are considered.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.313-324
• /
• 2016

As building information modeling (BIM) is expanding its influence in various fields of architecture, engineering, construction and facility management (AEC-FM) industry, BIM-based automated code compliance checking has become possible prospects. For the automated code compliance checking, requirements in building code need to be processed into explicit representation that enables automated reasoning. This paper aims to develop high-level methods that translate verb phrases into explicit representation. The high-level methods represent conditions, properties, and related actions of the building objects and clarify the core content of the constraints. The authors analyze building permit requirements in Korea Building Code and establish a standardized process of deriving the high-level methods. As a result, 60 kinds of the high-level methods were derived. In addition, method classification, analysis, and application are introduced. This study will contribute to the representation of explicit building code sentences and establishment of the automated building permit system of Korea.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.931-936
• /
• 2005

There may be subtle errors in embedded software since its functionality is very complex. Thus formal verification for detecting them is very needed. Model checking is one of formal verification techniques, and SLAM is a well-known software model checking tool for verifying safety properties of embedded C program. In this paper, we develop a software model checker like SLAM for verifying embedded Java program Compared to SLAM, our tool allows to verify liveness properties as well as safety ones. As a result, we verify some desired properties in embedded Java program for controlling REGO robot.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.303-309
• /
• 2008

Landcover map can use to establish basic national environment policy as main data predicting living place, counting pollution like a atmosphere, water and forest part. During the 1998-2005 years, Korean government made landcover maps using satellite image for part of south Korea. Landcover maps are offered free for public purpose to university and institute. So, it used basic data for policy and research parts. There are some problems for application parts because of inconsistency. So, in this study, to estimate accuracy of source data by quality checking for landcover maps. As a result, there are some errors like classification inconsistencies. So, it need verification process for landcover maps.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.33-46
• /
• 2006

This study was carried out to investigate a radio-frequency/vacuum (RF/V) drying ability and physical properties of the green boards and the pre-kiln dried boards with 40 mm thickness, and the 70 mm-thick green board of Iroko (Milicia excelsa). The major results were summarized as follows; The drying time from initial moisture content (MC) of 110% to approximate 6% MC for a 40mm-thick green board was 192 hours, and about 200 hours for the 70 mm-thick green board, respectively and so the RF/V drying times were dramatically shortened compared to conventional kiln drying time. The case hardenings at the RF/V drying completion stage test were very negligible, thus represented almost no existence of the residual stress. The checks were very slightly formed on all of the boards during the RF/V drying test, but crook appeared quite severely. During the accelerating test, the water-resistant treated specimens had not experienced any signs of checking occurred, whereas the control boards had encountered very frequent occurrences of end checking and slight surface checking. There were no observations of warping and discoloring regardless of the treatment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.7
• /
• pp.657-664
• /
• 2011

This paper shows a whole noise quality checking system for the new developed 6th speed automatic transmission manufactured in USA. Due to demand for manufacturing of the high NVH quality transmissions in the mass product line, some special checking system called EOL NVH is adapted. This EOL system is using vibration sensor and analysis technologies. Through adapting vibration analysis technologies and functions likewise RMS, crest factor, harmonics, peak, band and order tracking, various noise problems caused by wear, nick and deformations could be successfully detected and predicted. Therefore, automatic transmissions manufactured in the USA could get high NVH quality. The developing process described in this paper and results on EOL system will offer good guides to the engineers who built the next transmission factory.

• Language and Information
• /
• v.18 no.2
• /
• pp.59-79
• /
• 2014

This paper aims at exploring the processing mechanism of filler-gap dependency resolution and feature checking in Korean wh-constructions. Based on their findings on Japanese sentence processing, Aoshima et al. (2004) have argued that the parser posits a gap in the embedded clause in head-final languages, unlike in head-initial languages, where the parser posits a gap in the matrix clause. In order to verify their findings in the Korean context, and to further explore the mechanisms involved in processing Korean wh-constructions, the present study replicated the study done by Aoshima et al., with some modifications of problematic areas in their original design. Sixty-four Korean native speakers were presented Korean sentences containing a wh-phrase in four conditions, with word order and complementizer type as the two main factors. The participants read sentences segment-by-segment, and the reading times at each segment were measured. The reading time analysis showed that there was no such slowdown at the embedded verb in the scrambled conditions as observed in Aoshima et al. Instead, there was a clear indication of the wh-feature checking process in terms of a major slowdown at the relevant region.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.219-223
• /
• 2021

Considering the current COVID 19 pandemic, herein, we developed a material that can be used to fabricate a device for checking the body temperature of a person who has been exposed to influenza or corona virus. This material was formed by mixing pluronic F127 (F127) with a polydiacetylene (PDA) vesicle, which was formed with 10,12-pentacosadiynoic acid. The color of the system started to change from blue to light purple at 37 ℃, finally turning reddish at 40 ℃. Thus, the developed material can be used to detect changes in body temperature, and thus, detect signs of fever. The mixing ratio of the PDA vesicle and F127 was an important factor for controlling the temperature at which the color change started. The results showed that the color change accompanied by the separation of the PDA vesicle with F127. We believe that this phenomenon plays an important role in reducing the conjugation length in the double and triple bond of PDA.