• Journal of Preventive Medicine and Public Health
• /
• 제27권4호
• /
• pp.807-814
• /
• 1994

This study is to find out changes in medical practice at a university hospital before and after covering intraocular lens (IOL) from the health insurance benefit. The coverage started on March 1, 1993 and a total of 596 cases who were discharged from July 1 to December 31, 1992 and 580 cases who were discharged from July 1 to December 31, 1993 were analyzed. Since the standard reimbursement scheme was changed from March 1, 1993, the charges for 1992 were transformed into 1993 scheme. Major findings are as follows: Average length of stay was statistically significantly decreased from 8.24 days in 1992 to 6.86 days in 1993. Charges except IOL has been statistically significantly decreased from 501,000 Won in 1992 to 444,000 Won in 1993. Charges for drugs and injection have been reduced. However, charge per day for them was not much different. This is due to decrease in length of stay. Charges for laboratory tests and radiologic examination were quite the same. Charges which are not covered by the insurance remained the same. The revenue of the hospital was reduced as expected. However, the hospital reduced the length of stay and increase the turnover rate In order to compensate the potential loss of revenue due to the difference of reimbursement between the out-of-pocket expense and the insurance coverage. By introducing the IOL benefit in the insurance, the insured pays less, hospital generates more revenue through shortening the hospital stay, and the total medical care cost becomes less nationwidely.

• 한국조명전기설비학회지:조명전기설비
• /
• 제1권2호
• /
• pp.74-81
• /
• 1987

고분자 절연재료에 전하주입시 발생하는 캐리어 트랩현상은 재료의 절연성을 저하시키는데 중요한 영향을 미치는 것으로 알려져 있다. 따라서 본 연구에서는 절연재료의 전기적 특성을 개선한다는 측면에서 캐리어의 거동을 파악하기 위해 내열성이 폴리프로필렌보다 우수한 이축 연신된 폴리프로필렌 필름(두께 $50\mu\textrm{m}$)을 선정하여 전계변화에 따른 열자격전류 스펙트라를 분석 검토하였다. 온도범위 303~413[K]와 전계범위 2~80[㎹/m]에서 열자격 전류의 변화를 살펴본 결과 전계 12[㎹/m]이하에서는 전하주입의 효과가 관찰되지 않았으나 전계가 점점 높아지면 트랩된 공간전하와 전극으로부터 주입된 공간전하가 형성되어 Hetero 및 Homo성 열자격전류 스펙트라가 나타나며 이는 결국 절연파괴를 야기시키는 것으로 예측되어진다. 또한 이축 연신된 시료가 미연신 재료보다 우수한 절연특성을 가지고 있음을 확인 할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.45-49
• /
• 2001

We have investigated physical and electrical properties of the Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin film for alternative gate dielectrics in the metal-oxide-semiconductor device. The oxidation of Hf deposited directly on the Si substrate results in the H $f_{x}$/ $O_{y}$ interfacial layer and the high-k Hf $O_2$film simultaneously. Interestingly, the post-oxidation N2 annealing of the H102/H1Si70y thin films reduces(increases) the thickness of an amorphous HfS $i_{x}$/ $O_{y}$ layer(Hf $O_2$ layer). This phenomenon causes the increase of the effective dielectric constant, while maintaining the excellent interfacial properties. The hysteresis window in C-V curves and the midgap interface state density( $D_{itm}$) of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin films less than 10 mV and ~3$\times$10$^{11}$ c $m^{-2}$ -eV without post-metallization annealing, respectively. The leakage current was also low (1$\times$10-s A/c $m^2$ at $V_{g}$ = +2 V). It is believed that these excellent results were obtained due to existence of the amorphous HfS $i_{x}$/ $O_{y}$ buffer layer. We also investigated the charge trapping characteristics using Fowler-Nordheim electron injection: We found that the degradation of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ gate oxides is more severe when electrons were injected from the gate electrode.e electrode.e.e electrode.e.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

• 대한전자공학회논문지
• /
• 제11권2호
• /
• pp.5-11
• /
• 1974

IMPATT다이오드의 자기혼합효과(self mixing effect)를 이론으로 해석하고 실험으로 확인하였다. 이론은 증배과정에서 외부의 마이크로도 신호에 의하여 공간전하가 변조를 받는 것에 근거하였다. 비이트출력은 신호전력과 IMPATT다이오드발진전력에 직선적으로 비례하였고 IMPATT다이오드의 부성저항이 클수록 비이트출력이 증대하였다. 실험은 GaAs의 EPi층과 금속사이의 Schottky접합을 갖는 IMPATT다이고드를 사용하였다. 전자계산기의 계산결과 10(GHz)에서 변환이득은 -0.4[db]였으며 실험치는 비이트주파수 20(MHz)에서 -6.6[db]였다. 이 차이는 Read모델의 단순한 가정과 공진기의 구조에 의한 것이었다. 1개의 다이오드가 국부발진 및 R합작용을 동시에 수행할 수 있었으며, 또 변환이득은 일반다이오드보다 높았고 IMPATT다이오드의 발진출력에 따란 증대시킬 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제18권1호
• /
• pp.41-50
• /
• 1985

To find out the differences in medical practice according to the environment of patient care and managerial situation of the medical care institutions, normal spontaneous vaginal delivery and acute appendicitis were selected, which is suitable for comparison because of their high comparability. A total of 473 cases of normal spontaneous vaginal delivery and 408 cases of acute appendicitis was sampled from the claims to Korea Medical Insurance Cooperations during January to June 1984. Complicated cases were excluded from population and sampling was restricted from 40 to 60 percentile for total charges by the type of medical care facility in order to rule out the influence originating from case mix. Important items representing type and quantity of medical care service were compared by type of facility. Major findings are as follows : 1. University hospital shows the highest in charges per case and decrease in order of general hospital, and clinic. 2. In case of normal spontaneous vaginal delivery, average length of stay shows statistically significant difference by type of facility. 3. Charge amount for each service item affected by practice pattern shows statistically significant difference mostly by type of facility. It is suggested that medical practice pattern is different by type of facility for medical services. 4. Difference in total medical expenditure by type of facility is affected more with charges for materials, consumables and drugs than with fee for service activity. 5. In administering drugs to patients, hospital and clinic show higher injection rate than university and general hospital. 6. Clinical Laboratory tests were common in order of uninalysis, hemoglobin, hematocrit, white blood cell count, urine microscopic examination in cases of normal spontaneous vaginal delivery; white blood cell count, urinalysis, hemoglobin, hematocrit, urine microscopic examination, white blood cell differential count, in cases of acute appendicitis. 7. The result for Laboratory test and Radiologic study shows extreme difference by type of facility. Test rate is lowest in clinic and increase hospital, general hospital, and university hospital in order, both in type and frequency.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• Rapid Communication in Photoscience
• /
• 제3권1호
• /
• pp.16-19
• /
• 2014

Anodic self-organized titania nanotube (TNT) arrays have a great potential as efficient electron-transport materials for dye-sensitized solar cells (DSSC). Herewith we report the photovoltaic and kinetic investigations for a series of heteroleptic ruthenium complexes (RD16-RD18) sensitized on TNT films for DSSC applications. We found that the RD16 device had an enhanced short-circuit current density ($J_{SC}/mAcm^{-2}=15.0$) and an efficiency of power conversion (${\eta}=7.2%$) greater than that of a N719 device (${\eta}=7.1%$) due to the increasing light-harvesting and the broadened spectral features with thiophene-based ligands. However, the device made of RD17 (adding one more hexyl chain) showed smaller $J_{SC}(14.1mAcm^{-2})$ and poorer ${\eta}(6.8%)$ compare to those of RD16 due to smaller amount of dye-loading and less efficient electron injection for the RD17 device than for the RD16 device. For the RD18 dye (adding one more thiophene unit and one more hexyl chain), we found that the device showed even lower $J_{SC}(13.2mAcm^{-2}) $ that led to a poorest device performance (${\eta}=6.2%$) for the RD18 device. These results are against to those obtained from the same dyes sensitized on $TiO_2$ nanoparticle films and they can be rationalized according to the electron transport kinetics measured using the methods of charge extraction and transient photovoltage decays.

• ETRI Journal
• /
• 제31권6호
• /
• pp.660-666
• /
• 2009

We investigate the effects of interfacial dielectric layers (IDLs) on the electrical properties of top-gate In-Ga-Zn-oxide (IGZO) thin film transistors (TFTs) fabricated at low temperatures below $200^{\circ}C$, using a target composition of In:Ga:Zn = 2:1:2 (atomic ratio). Using four types of TFT structures combined with such dielectric materials as $Si_3N_4$ and $Al_2O_3$, the electrical properties are analyzed. After post-annealing at $200^{\circ}C$ for 1 hour in an $O_2$ ambient, the sub-threshold swing is improved in all TFT types, which indicates a reduction of the interfacial trap sites. During negative-bias stress tests on TFTs with a $Si_3N_4$ IDL, the degradation sources are closely related to unstable bond states, such as Si-based broken bonds and hydrogen-based bonds. From constant-current stress tests of $I_d$ = 3 ${\mu}A$, an IGZO-TFT with heat-treated $Si_3N_4$ IDL shows a good stability performance, which is attributed to the compensation effect of the original charge-injection and electron-trapping behavior.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.