• 전기학회논문지
• /
• 제57권11호
• /
• pp.1976-1980
• /
• 2008

This paper deals the characteristic analysis of Switched Reluctance Motor(SRM) driven by single-pulse mode considering dc link voltage ripple. Two dimensional time-stepped Finite Element Method(FEM) is used to analyze the characteristic of SRM driven by single-pulse mode with dc link voltage ripple. The analysis results is verified by experimental test.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.411-414
• /
• 2007

In this paper, we studied on characteristic improvement of Balun-BPF using dual-mode ring resonators. The simulated Balun-BPF shows bandwidth of 150MHz at center frequency of 2.45GHz, 4-pole characteristic, return loss of 15dB and symmetrical out-put characteristic.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.873-877
• /
• 2019

본 논문에서는 휴대단말기 안테나의 대표적 형태인 역 F 안테나(Inverted F Antenna, IFA)와 루프(Loop) 안테나에 따른 디지털 노이즈의 결합(coupling) 정도를 특성모드(characteristic mode)를 사용하여 분석한다. 우선, 안테나를 포함한 인쇄회로기판(Printed Circuit Board, PCB)의 특성모드 전류와 디지털 신호라인의 방향에 따른 결합 정도를 비교 분석하고, 이를 토대로 휴대단말기의 WiFi 안테나와 전방 카메라(front camera)의 결합에 대해서 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프형 피더(feeder)로 모델링 했고, 안테나 타입(type)에 따른 노이즈 결합 변화에 대해서 분석을 했다.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.240-243
• /
• 2008

Using the well-known Fokker-Planck method, this paper presents a standard way to find the joint-characteristic function for the first- and second-order polarization-mode-dispersion vectors originally derived by Foschini and Shepp. Compared with the Foschini and Shepp's approach, the Fokker-Planck approach gives a more accurate and straightforward way to find the joint-characteristic function.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.261-266
• /
• 2003

The growth behavior of the transverse crack, which was one of the most dangerous damages of rail defects, was investigated under mode I and mixed mode loading in rail steel. In the case of variable amplitude loading, the fatigue crack growth behavior was discussed using characteristic stress intensity factor ranges ${\Delta}_{rms}$. In addition, characteristic comparative stress intensity factor ranges ${\Delta}_{V,rms}$ was proposed to evaluate the quantitative effects of the variable amplitude under mixed mode loading. As a result, crack growth rate under variable amplitude loading was faster than that under constant amplitude loading.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.474-478
• /
• 2019

본 논문에서는 휴대단말기 내의 디지털 노이즈와 안테나 사이의 결합(coupling)으로 인한 수신감도 저하 현상을 특성 모드(characteristic mode)를 사용해서 분석한다. 우선, 안테나와 디지털 잡음의 결합 메커니즘(mechanism)을 분석하고, 카메라 노이즈로 인한 안테나 수신감도 열화현상의 개선 방법 중 하나인 그라운드(ground) 선의 디커플링 커패시터(decoupling capacitor, decap)의 역할에 대해서도 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호 선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프(loop)형 피더(feeder)로 모델링 했고, 그라운드 선과 커패시터를 추가한 개선 모델에 대해서 분석을 했다.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.629-635
• /
• 1997

주기적인 축방향 슬롯이 있는 동축선로 도파관 구조에 TE 편파가 입사될 때 특성모드 이론(characteristic mode theory)을 사용하여 가중 고유방정식(weighted eigenvalue equation)을 유도하고, 일반적인 수치방볍 으로 특성값(characteristic values)과 특성전류(characteristic currents)를 구하여 미지의 등가 자기전류, 산 란패턴과 RCS(radar cross section)를 구하였다. 그리고 이 수치 결과들을 모멘트법을 이용하여 구한 결과들과 각각 비교하여 특성모드에 의한 해석방볍의 타당성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.200-203
• /
• 2002

This paper presents Continuous-current mode of $S^4$-PFC(Single-Stage Single-switch Power Factor Correction) converter. Proposed converter operates in the continueous current mode(CCM) at full load and discontinuous current mode(DCM) at light load. So, characteristic of proposed converter is no bus voltage stress and Zero Voltage Switching(ZVS) using resonant auxiliary circuit. And. This paper presents characteristic of $S^4$-PFC converter and effect of circuit parameter of proposed converter through the input inductor, PFC capacitor's variation. All of these theory and characteristic verified through the experiment with a 72W(12V, 6A), $90^{kHz}$ prototype converter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.791-794
• /
• 2001

We described a method resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equation is solved by using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult a mode identification. The analysis based on the approximated electromagnetic representation. This kinds of studies only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies have not been covered. But, the contour graph method to analyze the characteristic equations is simple and all parts of resonant frequency graph can be easily drawn, it is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1069-1072
• /
• 2001

We described a method resonant mode identification in dielectric-rod loaded cylindrical cavity resonators. Resonant frequency of dielectric loaded cavity is calculated by analyzing the characteristic equation. The characteristic equation is solved by using the ContourPlot graph of Mathematica. As the result of comparing calculation value and experimental value of resonant frequencies, we know that the field representation of non-decaying mode is exact. The contour graph method is not a method using approximated representation of electromagnetic field variation at the outer area of dielectric in the resonators but a method using exact representation.