• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.857-859
• /
• 2002

This paper describes an analysis of Magnetic actuator with permanent magnet using 2-D axisymmetric finite element method. Magnetic actuator is the machine to change electrical signal into mechanical signal, and fast switching device to be used for breaker and automation field etc. This magnetic actuator considered action for armature distance, external circuit, and nonlinear material characteristic and current. Also, comparative analysis is performed for 2 coil type and 1 coil type by coil type of actuator, then characteristic is grasped. It is Combined with external circuit for analyzing transient characteristic by variable time. According to the results, we analyzed action characteristic of Magnetic actuator.

• ETRI Journal
• /
• 제28권3호
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1394-1399
• /
• 2001

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S(Wind Turbine System) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S. the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program (STAR MODAL) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer. For validation of these experiments. the finite element analysis is performed with commercial F.E.M Program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• Korean Journal of Mathematics
• /
• 제29권3호
• /
• pp.483-492
• /
• 2021

This article concerns the property that for any element a in a ring, if a²ⁿ = aⁿ for some n ≥ 2 then a² = a. The class of rings with this property is large, but there also exist many kinds of rings without that, for example, rings of characteristic ≠2 and finite fields of characteristic ≥ 3. Rings with such a property is called reduced-over-idempotent. The study of reduced-over-idempotent rings is based on the fact that the characteristic is 2 and every nonzero non-identity element generates an infinite multiplicative semigroup without identity. It is proved that the reduced-over-idempotent property pass to polynomial rings, and we provide power series rings with a partial affirmative argument. It is also proved that every finitely generated subring of a locally finite reduced-over-idempotent ring is isomorphic to a finite direct product of copies of the prime field {0, 1}. A method to construct reduced-over-idempotent fields is also provided.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.265-270
• /
• 2005

In this paper, four-element MIMO(Multi-Input Multi-Output) antenna operating at 5.2GHz and 5.8GHz is proposed. Each antenna element is fabricated by using inverted-L type and the isolation characteristic among antenna elements is adjusted by the distance between radiation element and ground. The designed array antenna has the impedance bandwidth at 5.15$\sim$5.35 and 5.725$\sim$5.825GHz for VSWR$\leq$3 and the isolation characteristic less than -20dB at same frequency.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.85-87
• /
• 2003

In this paper, Surppose lumped element type power divider with superior Harmonic suppress characteristic This power divider is small than general power divider(Wilkinson power divider) in low frequency. The lumped element type power divider have applicationa Filter theory. The lumped element type power divider employ neighborhood low frequency as 10MHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.53-57
• /
• 1989

Until now, method of equivalent circuit is generally used in analyzing the characteristic of the synchronous alternator. But this method can't apply when loads are connected to alternator. In this paper, we analyzed the load characteristic of the synchronous alternator with permanant magnet using 2-dimensional finite element method having voltage source. The loads of a alternator are battary and diodes which are used to rectify. also, we used half periodic boundary condition in the F.E.M calculation

• 대한수학회보
• /
• 제49권3호
• /
• pp.589-599
• /
• 2012

An element of a ring is called strongly nil clean provided that it can be written as the sum of an idempotent and a nilpotent element that commute. We characterize, in this article, the strongly nil cleanness of $2{\times}2$ and $3{\times}3$ matrices over $R[x]/(x^2-1)$ where $R$ is a commutative local ring with characteristic 2. Matrix decompositions over fields are derived as special cases.

• 한국전자파학회논문지
• /
• 제18권7호
• /
• pp.784-795
• /
• 2007

본 논문에서는 휴대폰용 내장형 PIFA 형태를 바탕으로 안테나 면을 4개의 element로 나눔으로써 넓은 대역폭과 향상된 이득 특성을 갖는 multi element 안테나를 제안하였으며, CDMA 대역인 $824{\sim}896MHz$와 RFID 대역인 $908.5{\sim}914MHz$를 동시에 만족하도록 설계하였다. 제안된 안테나의 크기는 $35{\times}15{\times}5mm^3$로 S사 A 모델의 케이스를 바탕으로 설계되었으며, 각 element를 안테나 안쪽으로 접어 넣음으로써 안테나의 소형화를 이루었다. 안테나의 광대역 및 향상된 이득 특성을 얻기 위해 안테나의 면을 4개의 element로 나누었다. 그 결과 전류의 패스가 길어지고 나뉘어짐에 따라, 안테나의 중심 주파수가 낮아지고 대역폭이 넓어지는 특성을 보였다. 또한, 안테나를 여러 개의 element로 나눔으로써 좀 더 고른 전류 분포를 갖게 되어 안테나의 효율이 향상되고 이득 값이 향상되는 특성을 가질 수 있었다. 좀 더 고른 전류 분포를 유도하여 안테나의 효율을 향상시키기 위해 전류가 각 element로 직접 전달되도록 급전 점에 변화를 주었다. 그 결과, 안테나의 이득 값이 더욱 향상되었으며, 급전 구조에 변화를 주면서 element를 4개로 설계하여 그 특성을 고찰한 결과, 가장 높은 이득 값을 보임을 확인하였다. 안테나의 이득 값을 유지한 상태로 소형화하기 위해 전류 방향을 고려하여 안테나의 각 element를 안테나의 앞면은 아래쪽으로 양 옆면은 안테나의 안쪽으로 접어 넣었다. 또한, 급전 위치를 조절하여 안테나의 공진 길이를 늘리기 위해 급전 점의 위치를 접지면의 윗부분에 배치하였다. 케이스를 고려하지 않은 상태로 원하는 안테나 특성을 얻었다고 하더라도, 케이스에 부착되면 주파수가 이동되고 원하는 주파수 대역에서 안테나 이득 값이 저하되기 때문에 휴대폰 케이스에 부착 시 $150{\sim}200MHz$의 주파수 이동이 발생함을 확인한 후에 1.08 GHz에 공진 주파수가 나타나도록 설계하였으며, 공진 주파수에서의 측정된 최대 이득 값은 3.1 dBi를 나타내었다. 케이스를 고려하여 측정한 경우, VSWR<2 기준 임피던스 대역폭은 $0.824{\sim}0.936GHz$로 110 MHz의 대역폭을 갖고 CDMA 대역과 RFID 대역을 동시에 만족할 수 있음을 나타내었다. 측정된 이득 값은 최소 -3.4 dBi에서 최대 -0.5 dBi를 나타내었고, 무지향성 패턴을 보임을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.946-952
• /
• 2010

A method for the identification of structural characteristic parameters of a steel bar in the matrices form such as stiffness matrices and mass matrices from frequency response function(FRF) by genetic algorithm is proposed. As the method is based on the finite element method(FEM), the obtained matrices have perfect physical meanings if the FRFs got from the analysis and the FRFs from the experiments were well coincident each other. The identified characteristic matrices from the FRFs with maximun 40 % of random errors by the genetic algorithm are coincident with the characteristic matrices from exact FEM FRFs well each other. The fitted element diameters by using only 2 points experimental FRFs are similar to the actual diameters of the bar. The fitted FRFs are good accordance with the experimental FRFs on the graphs. FRFs of the rest 9 points not used for calculating could be fitted even well.