• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1599-1610
• /
• 2019

Intelligent services have expanded as Internet of Things (IoT) technology has evolved and new requirements emerge to accommodate various services. One new requirement is transmitting data over long distances with low-power. Researchers have developed low power wide area (LPWA) network technology to satisfy the requirement; this can improve IoT network infrastructure and increase the range of services. However, network coverage expansion causes several problems. The traffic load is concentrated at a specific gateway, which causes network congestion and leads to decreased transmission efficiency. Therefore, the approach proposed in this paper attempts to recognize and then avoid congestion through gateway channel hopping. The LPWA network employs multiple channels, so wireless channel hopping is available in a gateway. Devices that are not delay sensitive wait for the gateway to reappear on their wireless channel; delay sensitive devices change the wireless channel along the hopping gateway. Thus, the traffic load and congestion in each wireless channel can be reduced improving transmission efficiency. The proposed approach's performance is evaluated by computer simulation and verified in terms of transmission efficiency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.203-207
• /
• 2004

Yangtze River channel is in natural condition for a long time. There are more to be done in grade of navigation and transport. Since 1980's the rate of vessel in JiangSu channel is going up every year, especially for ocean vessels. Meanwhile, the serious factors such as no sailing at night have become a battlement causing the long period for vessels, high cost for shipowners, lower competitiveness for JiangSu ports along the Yangtze River. It also can not meet the port logistic development. After the Ships' Routeing in JiangSu has been carried out. It has improved the safety of navigation in JiangSu area and reduced the risk of pollution or other damage to the marine environment caused by ships colliding or anchoring in or near JiangSu channel. By analyzing, compareing, calculating and model forecasting. The main focus of the paper is put on the study the development of port, channel in JiangSu and efficiency in many fields. Navigation efficiency of the sailing at night; Safety efficiency of reducing the risk by ships; More efficiency of the higher cargo volumes of the other ports in Yangtze River with the increase cargo volume of JiangSu ports along Yangtze River. The purpose of this study is: To get the social and economical efficiency after the Ships' Routeing in JiangSu has been carried out. Also the role of the Ships' Routeing of JiangSu in the development of Port and Channel.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.47-50
• /
• 2008

A novel high channel efficiency transceiver based on a fast acquisition frequency synthesizer has been designed. The direct digital synthesis (DDS) technique is applied and a simple memory look-up table is incorporated to expedite channel acquisition. The technique simplifies the frequency control process in the transceiver and thus reduces the channel switching time. As a result, the channel efficiency is improved. The designed transceiver is ideal for frequency hopping mobile communication applications.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1593-1599
• /
• 2017

This paper presents a multi-channel light-emitting diode (LED) driver IC with a current-mode current regulator. The proposed current regulator replaces resistors for current sensing with a sequentially controlled single current sensor and a single regulation loop for sensing and regulating all LED channel currents. This minimizes the current mismatch among the LED channels and increases voltage headroom or, equivalently, power efficiency. The proposed LED driver IC was fabricated in a $0.35-{\mu}m$ BCD 60-V high voltage process, and the chip area is $1.06mm^2$. The measured maximum power efficiency is 93.4 % from a 12-V input, and the inter-channel current error is smaller than as low as ${\pm}1.3%$ in overall operating region.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.43-47
• /
• 2009

Glass forming technology is used to form channels of external electrode flat fluorescent lamps (FFL). The efficiency of FFL depends on the number and the length of the channels. Five FFLs with same size ($300\;mm{\times}80\;mm$), different channel number, and different channel length were fabricated. The electrical and optical characteristics of 5 FFLs were evaluated. It was found that the FFL with one channel with its channel length of 1,110 mm and channel width of 7 mm corner width was shown to have the highest efficiency at room temperature operation.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.413-419
• /
• 2014

Underwater acoustic channel has time-variability. Time varying channel which disturbs the continuous transmission of information data reduces the underwater acoustic communication performance. In this paper, we show the temporal coherence as time-variability of channel and indicate throughput efficiency in accordance with transmission time of information data. Then we analyzed influence of underwater channel time-variability on communication throughput efficiency. We confirmed that the throughput efficiency reduced when the time-variability of the channel increased via lake trial.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.549-560
• /
• 2008

In this paper, we propose a new multi-channel MAC protocol to improve the channel efficiency by using two interfaces. Most of previous researches that have considered multi-channel wireless network environments use a common control channel to exchange control signals and they have a bottle neck problem at common control channel as increasing the number of data channels. In the proposed MAC protocol, we separate receiving and transmitting channels so that sending and receiving data and control packets at the same time is possible. It increases the total network throughput. Since there is no common control channel, the network does not suffer from the bottle neck problem. By applying a TDMA scheme, we can avoid packet collisions between data packets and control packets and reduce the possibility of CTS or ACK packet collisions. Simulation results show that the proposed multi-channel MAC protocol improves the total network throughput and channel efficiency compared with the existing method.

• Journal of agriculture & life science
• /
• v.44 no.1
• /
• pp.69-80
• /
• 2010

The purpose of this study is to analyse current marketing practices and marketing efficiency using operational efficiency. Through field survey on marketing situations and channels, we found that major marketing channels of paprika were classified into six types : channels in exporting market included (1) producer's organization leading channel (type I), (2) regional cooperative leading channel (type II), (3) individual producer leading channel (type III), and channels in domestic market included (4) wholesale markets targeting channel (type IV), (5) distribution agents targeting channel (type V), (6) cooperative system selling channel (type VI). According to the estimated result of operational efficiency of marketing channels, marketing efficiency of type III and IV was relatively higher than type I,II and type V, VI respectively.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.145-150
• /
• 2010

In this paper, we propose additional data transmission system for spectrum efficiency improvement and derive channel capacity formula as a approximated closed-form. Spread spectrum watermarking scheme is selected for the watermarking embedder. Nakagami-q (Hoyt) model is considered as a multipath fading channel. Numerical results show the channel capacity variation of the proposed system in wireless fading channel. From the results, we confirm that the channel capacity of the watermarking system is affected by the fading coefficient and system parameters such that host sampling frequency, host-to-watermark ratio, watermark-to-noise ratio, and PN sequence length.