• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.334-338
• /
• 2004

In this paper, we suggest a new antenna structure for RFID(Radio Frequency IDentification) reader. Conventional RFID reader uses a loop antenna. The central area of a loop antenna shows a low magnetic field strength especially for the case of a large loop antenna diameter. We propose a parallel-fed multiple loop antenna. Simulation results and measured results show that we can adjust field distribution with the number of turns and diameter of an inner loop antenna to obtain a longer reading distance. Simulation results for the specific case of a proposed antenna structure show that at the center point of a proposed parallel-fed multiple loop antenna, the typical card area averaged magnetic field strength is 2.53A/m, which is higher than the case of a conventional type single loop antenna of 0.44A/m and the case of a series-fed multiple loop antenna of 0.96A/m when we drive with same source signal. We realized the antenna for the case of 13.56MHz RFID reader and the performance of reading distance was much more improved than the case of a conventional antenna.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.43-48
• /
• 1993

The $^1H-NMR$ spectra of the NH-group were obtained for N-ethylacetamide (NEAA) in the series of n-alcohols over a temperature range of 310∼350K by using NMR spectroscopy. The $^1H-NMR$ lineshape coupled to $^{14}N$ nucleus were analyzed to obtain the reorientational correlation times ${\tau}_c$ of NEAA. The data indicate that the coupling of solute and solvent decreases as the chain length of n-alcohols increases. But in the n-alcohols the reorientational motion depends almost linearly on η/T of solvents over our temperature range. The results are discussed in the context of the subslip phenomenon.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.307-312
• /
• 2014

This study suggested the ARIMA model taking into consideration the seasonal characteristic factor as a method for efficiently forecasting passenger transport demand of the Joongang Line. The forecasting model was built including the demand for the central inland region tourist train (O-train, V-train), which was opened to traffic in April-, 2013 and run in order to reflect the recent demand for the tourism industry. By using the monthly time series data (103) from January-, 2005 to July-, 2013, the optimum model was selected. The forecasting results of passenger transport demand of the Joongang Line showed continuous increase. The developed model forecasts the short-term demand of the Joongang Line.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.319-325
• /
• 2005

A signal processing method for white light interferometry (WLI), which performs a series of analog signal processing steps to locate the central interference fringe position at high speed: is developed and applied to a WLI temperature sensor system. We found that the new method has random walk of $0.019^{\circ}C/\sqrt{Hz}$ with good linearity. However, the temperature change in the path-matching interferometer results in drift of the measured sensor output. The temperature dependence of drift in the WLI temperature sensor system, was calculated to be $1.42{\mu}m/^{\circ}C$. It is also found that the relationship between the peak spacing in the interferogram and the spacing measured by the method can be nonlinear when the fringe spacing is comparable to the coherence length of the source.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.5
• /
• pp.451-455
• /
• 2007

The glandular odontogenic cyst is an uncommon odontogenic cyst as a distinct entity. We reviewed a series of 7 glandular odontogenic cysts of the jaws experienced between 2003 and 2006 at the department of Oral and Maxillofacial surgery, Chosun university. The study group consisted of 3 females (42.9%) and 4 males (57.1%), with an age range of 31 to 75 years and mean age was 58.6 years. The maxilla was involved in 5 cases (71.4%) and the mandible in 2 cases (28.6%). Three cases involved impacted tooth. Clinically 6 cases showed swelling and tenderness. All the lesion presented well-defined unilocular radiolucent lesion radiographically. Provisional clinical diagnosis was varied, incisional biopsy was done in 1 case. Histopathologically, those were lined by non-keratinized stratified epithelium and thickened epithelial segments (plaques) are seen within the lining epithelium. And epithelial lining contains eosinophilic cuboidal type cells, mucous cells and mucin pools in microcystic areas are identified. All cysts were treated by enucleation. All cases are not recurred during follow up period.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.321-325
• /
• 2015

Determining the absolute neutrino mass scale and the neutrino mass hierarchy are central goals in particle physics, with important implications for the Standard Model. However, the final answer may come from cosmology, as laboratory experiments provide measurements for two of the squared mass differences and a stringent lower bound on the total neutrino mass - but the upper bound is still poorly constrained, even when considering forecasted results from future probes. Cosmological tracers are very sensitive to neutrino properties and their total mass, because massive neutrinos produce a specific redshift-and scale-dependent signature in the power spectrum of the matter and galaxy distributions. Stringent upper limits on ${\sum}m_v$ will be essential for understanding the neutrino sector, and will nicely complement particle physics results. To this end, we describe here a series of cosmological hydrodynamical simulations which include massive neutrinos, specifically designed to meet the requirements of the Baryon Acoustic Spectroscopic Survey (BOSS) and focused on the Lyman-${\alpha}$ ($Ly{\alpha}$) forest - also a useful theoretical ground for upcoming surveys such as SDSS-IV/eBOSS and DESI. We then briefly highlight the remarkable constraining power of the $Ly{\alpha}$ forest in terms of the total neutrino mass, when combined with other state-of-the-art cosmological probes, leaving to a stringent upper bound on ${\sum}m_v$.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1081-1087
• /
• 2002

This study was performed to research the characteristics of suspended particulate for Yellow Sand of January, 1999 in Busan. Yellow Sand frequency during 13 years(1988~2000) in Busan showed maximum in April(57%), next to March(21%), May(16%). According to result of 850hPa weather map and backward isentropic trajectory, this event originated from the Gobi Desert and the Loess Plateau of China. And three mode was found in time series of TSP and PM10 concentration, primary peak showed the maximum hourly concentration at ali station. Gamjeondong as industrial site showed the highest TSP concentration and also had the longest high concentration($geq700\mu\textrm{g}/m^3$). In PM10, concentration of primary peak showed maximum value at Yeonsandong, maximum concentration of secondary and third peak was Deokcheondong. Lasted time from primary peak to secondary peak was about 30 hours, between secondary peak and third peak was 18 hours in Busan, The traveling time between occurrence of Yellow Sand the finding of it was 8~9 hours in Busan and 4~5 hours in central area.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.5-17
• /
• 2000

This study about the Zoot Style is the first part of a series of research, which is to examine various subcultural styles in 1900s. The main concern of this research is to investigate the origin of a style, the way how it developed, and the reason it appealed to people. Subculture is a marginallized culture which the subordinal groups in the social structure developed as a means of reaction against the dominant groups of a society. The clothes and decorations of these groups can be regarded as the central expressions of exclusiveness, loyalty and identities for their groups. In 1990s, the distinction between the subcultural style and high fashion tend to be blurred, because it has gained more influence on the high fashion. Zoot Suit, adopted and diffused by Cap Calloway in 1940s, is the code of a subculture formed by a special race, class, space, gender, and generation identities. It develops as a reaction, and consequently reflects the struggles against the dominant culture: it is to refuse, appreciate and ridicule the dominant style. The Zoot Style had a great influence both in Paris and Cuba: the Zazous Style in Paris and the Caribbean Style of Cuba are the subcultural styles branched from the Zoot Style.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.303-310
• /
• 2020

In this research, a hybrid mathematical model is derived using the higher-order polynomial kinematic model in association with soft computing technique for the prediction of best fiber volume fractions and the minimal mass of the layered composite structure. The optimal values are predicted further by taking the frequency parameter as the constraint and the projected values utilized for the computation of the eigenvalue and deflections. The optimal mass of the total layered composite and the corresponding optimal volume fractions are evaluated using the particle swarm optimization by constraining the arbitrary frequency value as mass/volume minimization functions. The degree of accuracy of the optimal model has been proven through the comparison study with published well-known research data. Further, the predicted values of volume fractions are incurred for the evaluation of the eigenvalue and the deflection data of the composite structure. To obtain the structural responses i.e. vibrational frequency and the central deflections the proposed higher-order polynomial FE model adopted. Finally, a series of numerical experimentations are carried out using the optimal fibre volume fraction for the prediction of the optimal frequencies and deflections including associated structural parameter.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.86-92
• /
• 2010

In GMAW processes, bead geometry is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage, welding speed, shielding gas and so on. Thus the welding condition has to be selected carefully. In this paper, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the GMA V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. Through the experiments, the target values of the back bead width and the height were chosen as 4mm and 1mm respectively for the V-grooved butt weld joint. From a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.