• Journal of Chest Surgery
• /
• v.23 no.5
• /
• pp.922-928
• /
• 1990

Treatment of patients with esophageal carcinoma remains disappointing. Fewer than 20% *of patients with esophageal carcinoma treated with curative intent by surgery and radiation therapy will be alive at 5 years. Fifty five patients underwent treatment for carcinoma of the esophagus and cardia which retrospective clinical study done between January 1983, and December, 1989 in Department of Thoracic and Cardiovascular Surgery, National Medical Center, Seoul, Korea. There were 48 men. 7 women and the mean age was 56.2 years[range, 38 to 78 years]. The most frequent preoperative findings included dysphagia[46 cases], weight loss[33 cases] and substernal pain[19 cases]. 19 cases[34.5%] were underwent resectional surgery, which was total esophagectomy with esophagogastrostomy[ 5 cases], with colon interposition[3 cases], lower esophagectomy with esophagogastrostomy [10 cases], with total gastrectomy and esophagojejunostomy [1 case]. The operative mortality was 15.8%[3/19] and causes of death were respiratory failure in 2 cases, and 1 case of sepsis. Palliative procedures, such as feeding gastrostomy and jejunostomy[14 cases], bypass surgery without resection[ 4 cases], radiation therapy[ 3 cases] were done.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.245-252
• /
• 1996

$\lambda$/4 phase-shifted DFB lasers with nonideal grating structure have been studied by using an effective-index transfer matrix method where material dispersion, vwaveguide dispersion and waveguide-structuredependent loss are taken into consideration. Nonideal grating structure in the center phase-shift region does not incur serous degradation of laser characteristics. Phase-shift error from the ideal shift of $\pi$ causes a decrease in the threshold gain difference and lasing wavelength shift and should be less than $\pi$/4 when residual facet reflectivity is 0.7%. also, positional error of the phase-shift should be less than 9% of the cavity length in order for the threshold gain difference to be decreased less than 10%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.803-808
• /
• 2011

In this study, $1{\times}2$ microstrip patch array antenna of 5.150 - 5.350GHz for wireless LAN was investigated and analyzed after optimizing the antenna parameters. From the measurement result, we obtained that the center frequency of the antenna is 5.214GHz and -41.17dB of the insertion loss, and 258MHz of bandwidth. The fabricated antenna has VSWR value of 1.1 and impedance value of $49.724{\Omega}$.

• Publications of The Korean Astronomical Society
• /
• v.22 no.1
• /
• pp.21-33
• /
• 2007

Ever since the identification of 6830 and 7088 features as the Raman scattered O VI 1032, 1038 resonance doublets in symbiotic stars by Schmid (1989), Raman scattering by atomic hydrogen has been a very unique tool to investigate the mass transfer processes in symbiotic stars. Discovery of Raman scattered He II in young planetary nebulae (NGC 7027, NGC 6302, IC 5117) allow one to expect that Raman scattering can be an extremely useful tool to look into the mass loss processes in these objects. Because hydrogen is a single electron atom, their wavefunctions are known in closed form, so that exact calculations of cross sections are feasible. In this paper, I review some basic properties of Raman scattered features and present detailed and explicit matrix elements for computation of the scattering cross section of radiation with atomic hydrogen. Some astrophysical objects for which Raman scattering may be observationally pertinent are briefly mentioned.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.133-136
• /
• 2011

This study concerned with the steel beam of bonding method and bonded steel beams by this method and both ends of different height, steel beams and steel beams in the center makes the junction. Both ends and the central part of steel beams connecting the lower flange by additional combining steel plates to convey stress, the stress to focus on the beam connections are passed to both ends of steel beams, and strength of beam connections is improved and steel structural beams is proposed to minimize the loss by Incision. If you use the developed method, the construction period is shortened, and reducing the amount of material can decrease the cost and reduction in floor height can be maximized business feasibility.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.29-35
• /
• 2013

The heterogeneous emergency communication radios is used at disaster management agencies of Korea to response activity in the event of disaster. The compensation method by communication connection time difference is necessary to seamless voice communication because radios have different communication method and delay. In this paper, we suggested solution for voice transmission chance and data loss problem.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.731-734
• /
• 2005

Cut slopes are collapsed in Korea every year. Cut slope collapses cause a loss of lives and assets. Many researchers make clear collapse factor of cut lope. Fresh rock weathered through reaction undergroundwater and groundwater. During weathering process, weathered minerals are created. Weathered minerals are analysed by X-ray diffraction meter. X-ray diffraction meter make possible quantity assessment of degree of weathering and indicator of potential collapse possibilities. This paper discuss possibilities of cut slope dangerous with analysis of weathered minerals of cut slope.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.64-70
• /
• 1995

We discussed the thermal analysis for a recording media with the variation of the laser pulse duration, the laser power and the temperature distribution in order to optimize the Te-based antireflection structure from the computer calculations. In the case that the radial heat diffusion is negligible, we can calculate the maximum temperature of the recording layer at the center of the spot by the Simple Model. The temperature profile of the recording layer is obtained from the Numerical Model by considering the total specific heat and the latent heat. As a result, the effect of the heat sinking acting as a thermal loss for the hole formation could be minimized by introducing the pulse with the hole formation duration(.tau.) below the thermal time constant(.tau.$_{D}$) of a dielectric layer. These requirments can be satisfied by using the dielectric thickness of the 2nd ART(Anti-Reflection Trilayer) condition or the dielectric materials with a low thermal diffusivity.y.

• The Journal of the Korean dental association
• /
• v.22 no.11 s.186
• /
• pp.973-978
• /
• 1984

The authors observed a case of Burkitt's lymphoma, occurred in the mandible, of 6-year-old female patient who admitted to the Department of Oral Radiology, Kyung Hee University Medical Center. The serial radiograms, clinical findings, and microscopid findings had been taken and obtained following results: 1. In serial radiograms, invasive and infiltrative bone destruction in the both mandibular body region was observed. Perforation and erosion of cortical plate of the mandibular angle area and loss of alveolar lamina dura in involved teeth were also noticed. 2. In microscopic findings, a monotous overgrowth of undifferentiated monomorphic lymphoreticular cells found. Macrophages with and abundant clear cytoplasm are usually found scattered uniformly throughout the tumor, producing the very characteristic 'starry-sky' appearance.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.149-152
• /
• 1992

A simple and practial equivalent technique has been presented in this study. Arbitrary number of bus system can be aggregated to the equivalent one-bus system, equivalents are totel real, and reactive bus powers and T/L losses viewing form boundary buses. Variables to be determined are line impedance between boundary buses and the equivalent bus, voltage and angle of that bus. IEEE 14 bus system is used to demonstrate the proposed method. even in contingency cases very good results have been obtained