• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.124-125
• /
• 2017

In this study, the shielding effectiveness of the Zn-Al arc thermal metal film coated cement-mortar mixed with copper powder by reflection, absorption, multi-reflection loss in 2.25~2.65 GHz was reviewed. By enhancing the mixing ratio of copper powder, the shielding effectiveness by absorption and multi-reflection loss was increased, but shielding rate(%) based on 80 dB showed below 20%. The Zn-Al arc thermal metal film coated on specimen, the shielding rate increased 3.5 times by reflection loss.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.57-61
• /
• 2006

Waste foundry sand of industrial waste which is happening by vast quantity according to fast development of industry has much the occurrence amount and processing method is depended on reclamation, and is using by fine aggregate for construction by recycling method among others. In this research Waste foundry sand powder into cement replace fare use possibility availability judge wish to Slump and air content decreased the replacement ratio increases by concrete special quality that do not harden according to experiment result, and unit capacity mass and bleeding increased the replacement ratio increases. Hardening concrete intensity special quality displayed strength improvement to replacement ratio 20%, and tendency that watertightness increases most in replacement ratio loft in watertight property appear. Considering the strength and watertight properties, the adequate usage of waste foundry sand powder is the 10% of replacement ratio.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1119-1120
• /
• 2006

High Energy Milling (HEM) is applied for the grinding of cement and this can lead to substantial refinement $(<2{\mu}m)$ and mechanically activation of the powder particles. The present paper reviews the preliminary studies, explains the novel technique and suggests the route into commercial application. Particular attention is paid to wear results with an applied $Si_3N_4-grinding$ unit where no substantial wear was found after 4000 h of operation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.533-536
• /
• 2005

Drying shrinkage and strength of the redispersible SBR and PAE powder-modified mortars were experimentally investigated. Results of the study that the drying shrinkage rapidly increased until 7 days of age and it was then saturated to the value of about $1\~2\times10^{4}$ after 14 days. It turned out that the polymer-cement ratio exerted more influence on the drying shrinkage than the content of powder shrinkage-reducing agent did. Flexural (compressive) strength of the mortar increased (decreased) as the polymer-cement ratio increased and it was 7$\~$11 (23$\~$39) MPa at 7 days of age. The average (maximum) increasing (decreasing) rate turned out to be about 10 (30) $\%$. As in the drying shrinkage case, the polymer-cement ratio exerted more influence on both flexural and compressive strengths than the content of powder shrinkage agent did.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.207-208
• /
• 2019

In this study, compressive strength was measured to evaluate the initial strength of cement mortar substituted with coal gasification slag containing desulfurized gypsum, and the reactivity of desulfurized gypsum was confirmed. In order to improve the reactivity, 2% gypsum mixed type and gypsum unfedged type specimens were fabricated and the influence of desulfurization gypsum on compressive strength of coal gasification slag and blast furnace slag fine powder replacement cement mortar was compared and confirmed. As a result of the experiment, it was confirmed that the initial compressive strength of the specimen containing the desulfurized gypsum was improved at the initial stage.

• 한국농공학회지
• /
• 제42권2호
• /
• pp.93-98
• /
• 2000

This study is performed to evalute experimentally the nondestructive properties on the concrete that is treated with crushed oyster shell powder of 0.15m or smaller in diameter. The ultrsonic pulse velocity of crushed oyster shell concrete(COSC) is in the range of 4.110-4.267m/s, and the dynamic modulus of elasticity of COSC range from 288$\times$10$^3$ to 318 $\times$10$^3$kgf/$\textrm{cm}^2$. The ultrasonic pulse velocity and dynamic modulus of elasticity are similar to those of normal portland cement concrete. The highest ultrasonic pulse velocity and dynamic modulus of COSC are measured at the 2.5% addition rate by weight of crushed oyster shell powder. The acid-resistance in increased of the content of crushed oyster shell powder. The acid-resistance of COSC with 15% addition rate by weight of crushed oyster shell power is 1.6 times greater than that of normal portland cement concrete. It is concluded that the addition of crushed oyster shell powder to normal portland cement concrete contributed to improve the nondestructive properties of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.120-121
• /
• 2021

The organic insulation material has excellent thermal insulation property, but it is difficult to expect fire stability, and semi inorganic insulation only delays combustible hour but it is difficult to expect fire stability. In this study, thermal insulation property of cement-based non-combustible inorganic insulation using cement and non combustible materials and redispersible polymer powder was studied. As a result of the experiment, the thermal insulation property decreased as the use of redispersible polymer powder increased, but the heat insulation property improved when using the appropriate amount.

• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.429-437
• /
• 2018

본 연구에서는 실제 레미콘 공장에 납품되는 OPC 20회분의 시료를 채취하여 성적서상 분말도와 실측 분말도 간의 상관성을 분석하고, 아울러 종전에 연구된 액체밀도계법 밀도 값과 OPC 분말도간의 상관성을 분석하므로서 시멘트 분말도 신속 추정 가능성을 평가 하고자 하였다. 또한 납품된 시멘트 시료를 이용하여 시멘트 모르타르 상태에서 유동성, 공기량, 강도 등 제반 기초적 특성과 성적서 및 실측 분말도와의 상관성을 분석하고자 하였다. 실험결과 성적서상 OPC 분말도와 실측 분말도는 매우 낮은 상관성을 나타내었다. 또한, 액체밀도계 밀도 값과 OPC 분말도간의 상관성은 성적서상 분말도는 매우 낮은 상관성을 나타낸 반면, 실측 분말도는 매우 높은 상관성을 나타내었다. 이때 액체밀도계 3분밀도 값과 OPC 분말도가 가장 높은 상관성을 나타내었는데, 그 회귀식을 활용할 경우 액체밀도계를 사용한 OPC 분말도의 신속 품질 평가가 가능할 것으로 판단되었다. 또한, OPC 분말도와 모르타르 특성치의 상관관계로서 성적서상 분말도의 경우는 상관성이 거의 없는 반면 OPC 분말도가 클수록 유동성, 공기량, 응결시간 및 강도치는 모두 높은 상관성이 나타남을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.129-137
• /
• 2011

본 연구는 석회석미분말을 4단계(0, 10, 20 및 30%)로 대체한 모르타르 및 콘크리트의 내해수성을 평가하기 위하여 수행되었다. 내해수성 평가를 위하여 모르타르의 해수침식 저항성 및 콘크리트의 염소이온 침투저항성 실험을 각각 실시하였다. 실험결과에 의하면, 시멘트 경화체의 내해수성은 석회석미분말의 대체율에 의존적으로 나타났다. 다시 말해서, 석회석미분말을 10% 대체한 모르타르 및 콘크리트는 대체적으로 OPC와 유사한 내해수성을 나타낸 반면, 석회석미분말의 대체율이 큰 모르타르 및 콘크리트의 내해수성은 OPC와 비교하여 현저하게 떨어지는 것으로 조사되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.33-34
• /
• 2023

Currently, research on construction materials using industrial by-products is being conducted in the Inhan construction industry due to CO₂ emissions during the cement production process and a shortage of aggregates. Among these, research has been conducted to use steel furnace slag as an aggregate by reducing the reactivity of free-CaO, which has the characteristic of expanding through open storage, aging, and rapid cooling. However, research on the use of powder as a cement admixture or substitute is insufficient. Therefore, this study aims to analyze the properties of fresh mortar using steel furnace slag powder. The mixing ratio of steel furnace slag powder was divided into three levels: 0, 20, and 40 (%), and the test items were flow and unit weight. The experimental results showed that as the mixing ratio of steel furnace slag powder increased, flow and unit weight tended to increase. Therefore, it is expected to have a positive effect on improving workability or strength as a cement admixture.