• ALGAE
• /
• v.31 no.4
• /
• pp.391-401
• /
• 2016

To develop an easy and rapid method of quantifying lipid contents of marine dinoflagellates, we quantified lipid contents of common dinoflagellate species using a colorimetric method based on the sulpho-phospho-vanillin reaction. In this method, the optical density measured using a spectrophotometer was significantly positively correlated with the known lipid content of a standard oil (Canola oil). When using this method, the lipid content of each of the dinoflagellates Alexandrium minutum, Prorocentrum micans, P. minimum, and Lingulodinium polyedrum was also significantly positively correlated with the optical density and equivalent intensity of color. Thus, when comparing the color intensity or the optical density of a sample of a microalgal species with known color intensities or optical density, the lipid content of the target species could be rapidly quantified. Furthermore, the results of the sensitivity tests showed that only $1-3{\times}10^5cells$ of P. minimum and A. minutum, $10^4cells$ of P. micans, and $10^3cells$ of L. polyedrum (approximately 1-5 mL of dense cultures) were needed to determine the lipid content per cell. When the lipid content per cell of 9 dinoflagellates, a diatom, and a chlorophyte was analyzed using this method, the lipid content per cell of these microalgae, with the exception of the diatom, were significantly positively correlated with cell size, however, volume specific lipid content per cell was negatively correlated with cell size. Thus, this sulpho-phospho-vanillin method is an easy and rapid method of quantifying the lipid content of autotrophic, mixotrophic, and heterotrophic dinoflagellate species.

• Preventive Nutrition and Food Science
• /
• v.4 no.4
• /
• pp.265-269
• /
• 1999

Taurine is a major $\beta$-amino acid in various tissues. Taurine transporter (TAUT) is responsible for the transportation of taurine in the cell. The transporter is affected by various stimuli to maintain its cell volume. Macrophage cell volume varies in its activated states. In our experiment, it was found that the murine macrophage cell line, RAW264.7, expressed TAUT protein in its membrane. Its transportation activities could be blocked by a $\beta$-amino acid such as $\beta$-alanine, but not by $\alpha$-amino acids in this cell line. When assessed in RAW264.7 under the influence of immunosuppressive reagents, the activity of the TAUT was decreased by the treatment of rapamycin (RM) or cyclosporin A (CsA). However when ionomycin (IM) was added to this system, TAUT activity was recovered only in CsA-treated cells in a concentration-dependent manner. In order to inhibit the voltage gated {TEX}$Ca^{+2}${/TEX} channel, calmidazolium was added to the RAW264.7 cell line. Treatment of the cell with calmidazolium completely blocked TAUT. Furthermore, addition of IM to this system recovered the activity of TAUT again. When we added phorbol myristate acetate (PMA) to the cell line, secretion of nitric oxide (NO) was increased 4-fold and the TAUT activity was decreased 5-fold. However, the addition of N-nitro L-arginine methyl ester (L-NAME), an inducible NO synthase (iNOS) inhibitor, to the PMA-treated cells, resulted in the recovery of TAUT activity. These results showed that the activity of TAUT was sensitive to the intracellular concentrations of both {TEX}$Ca^{+2}${/TEX} and NO.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.330-336
• /
• 2001

Angiogenesis is an essential process for the growth, invasion and metastasis of cancer. However, it is uncertain that antiangiogenic effects can be a major treatment strategy of oral cancer. The aim of this study was to investigate whether thalidomide, which is known to be a potent inhibitor of angiogenesis, have inhibitory effect on the growth and antiangiogenic effects of oral squamous cell carcinoma(OSCC) xenografted in nude mice and whether antiangiogenesis of thalidomide can be included as a major treatment strategy of oral cancer. After human oral squamous cell carcinoma strain KB was subcutaneously implanted in 20 nude mice, the volume of tumor was measured every three days. When the tumor mass reached $75{\sim}100mm^3$, thalidomide(200mg/kg/d) was administered into 10 experimental nude mice and the same volume of distilled water was administered into 10 control nude mice and the tumor volume was measured every three days. The excised tumor masses on the 30th day after administration were frozen and processed for immunohistochemistry using vascular endothelial growth factor(VEGF) and CD31. We evaluated microvessel density and VEGF expression. The results were as follows ; 1. Thalidomide retarded the growth of human OSCC as compared with the control group, but it was not statistically significant. 2. A statistically significant lower microvessel density was observed in the thalidomide-treated group than in the control group(p<0.01) and thalidomide significantly reduced VEGF expression (p<0.01). Thalidomide exhibited significantly antiangiogenic effect, but did not inhibit the growth of human OSCC effectively. Antiangiogenic therapy of thalidomide alone is not likely to be effective in the treatment of human OSCC, but might be regarded as adjuvant chemotherapeutic strategy.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.1
• /
• pp.29-34
• /
• 2012

The structural changes of $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material for lithium ion battery during the first charge was investigated in comparison with $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ using a synchrotron based in situ X-ray diffraction technique. The structural changes of these two cathode materials show similar trend during first charge: an expansion along the c-axis of the unit cell with contractions along the a- and b-axis during the early stage of charge and a major contraction along the c-axis with slight expansions along the a- and b-axis near the end of charge at high voltage limit. In $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode, however, the initial unit cell volume of H2 phase is bigger than that of H1 phase since the c-axis undergo large expansion while a- and b- axis shrink slightly. The change in the unit cell volume for $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ during charge is smaller than that of $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$. This smaller change in unit cell volume may give the $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material a better structural reversibility for a long cycling life.

• Journal of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.60-62
• /
• 1967

The statistical mechanical basis of the significant structure theory was compared and discussed with the improved Onno's approximation in the cell theory.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.67-70
• /
• 2003

To develop an effective geometric modeling is essential in order that precise mechanical properties and the geometrical properties of the 3-D braided composites can be estimated. RVE(representative volume element) was adopted fur geometrical modeling. RVE consisted of IC(inner unit cell), ISUC(interior surface unit cell) and ESUC(exterior surface unit cell). The whole geometrical model fur hybrid 3-D braided composites was developed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.186-189
• /
• 2004

A thermal model of carbon spun yam is presented. The unit cell of spun carbon yam is divided into a number of volume elements and the local material properties have been given to each element. By using Finite Difference Method (FDM), temperature distribution in the unit cell can be obtained. Effective thermal conductivity of the spun carbon yam unit cell is calculated using the temperature distribution and thermal conductivities of local elements.

• Korean Management Science Review
• /
• v.12 no.1
• /
• pp.51-60
• /
• 1995

This paper presents a workload based model and cell design support system (CDSS) in manufacturing cell design. The proposed model consider manufacturing factor such as machine capacity, production volume, process time, and cell size. Based on those information, workload is calculated and according to the workload, the relationship between machine and part is represented by the workload matrix. To form the manufacturing cell, correlation similarity coefficient (CSC) among machines are calculated and a pair of machines that has the highest value of CSC is assigned to a machine cell. Repeat the above steps until the desired manufacturing cells are obtained. Finally, a cell design support system that could increase the efficiency in the application of a proposed model is developed. The proposed model and CDSS are illustrated by a numerical example.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.1
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.