DOI QR코드

DOI QR Code

Crystal Structure Changes of LiNi0.5Co0.2Mn0.3O2 Cathode Materials During the First Charge Investigated by in situ XRD

  • Received : 2012.02.24
  • Accepted : 2012.03.07
  • Published : 2012.03.30

Abstract

The structural changes of $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material for lithium ion battery during the first charge was investigated in comparison with $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ using a synchrotron based in situ X-ray diffraction technique. The structural changes of these two cathode materials show similar trend during first charge: an expansion along the c-axis of the unit cell with contractions along the a- and b-axis during the early stage of charge and a major contraction along the c-axis with slight expansions along the a- and b-axis near the end of charge at high voltage limit. In $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode, however, the initial unit cell volume of H2 phase is bigger than that of H1 phase since the c-axis undergo large expansion while a- and b- axis shrink slightly. The change in the unit cell volume for $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ during charge is smaller than that of $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$. This smaller change in unit cell volume may give the $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material a better structural reversibility for a long cycling life.

Keywords

References

  1. K. Mizushima, P.C. Jones, P.C. Wiseman and J.B. Goodenough, Mater. Res. Bull., 15, 783 (1980). https://doi.org/10.1016/0025-5408(80)90012-4
  2. T. Nagaura and K. Tozawa, Prog. Batt. Solar Cells, 9, 209 (1991).
  3. K. Ozawa, Solid State Ionics, 69, 212 (1994). https://doi.org/10.1016/0167-2738(94)90411-1
  4. D.D. MacNeil and J.R. Dahn, J. Electrochem. Soc., 149, A912 (2002). https://doi.org/10.1149/1.1483865
  5. R. Gupta and A.J. Manthiram, Solid State Chem., 121, 483 (1996). https://doi.org/10.1006/jssc.1996.0067
  6. M. Broussely, Abstract No. 415, eleventh international meeting on lithium batteries, Monterey, California, USA, 23-28 (2002).
  7. T. Ohzuku and Y. Makimura, Chem. Lett., 642 (2001).
  8. Z. Lu, D.D. MacNeil and J.R. Dahn, Electrochem. Solid State Lett., 4, A200 (2001). https://doi.org/10.1149/1.1413182
  9. M. Balasubramanian, X. Sun, X.Q. Yang and J. McBreen, J. Power Sources, 92, 1 (2001). https://doi.org/10.1016/S0378-7753(00)00493-6
  10. M.S. Whittingham, Chem. Rev., 104, 4271 (2004). https://doi.org/10.1021/cr020731c
  11. X.Q. Yang, X. Sun, and J. McBreen, Electrochem. Commun., 8, 1257 (2006). https://doi.org/10.1016/j.elecom.2006.06.005

Cited by

  1. Thermal stability of charged LiNi0.5Co0.2Mn0.3O2 cathode for Li-ion batteries investigated by synchrotron based in situ X-ray diffraction vol.562, 2013, https://doi.org/10.1016/j.jallcom.2013.02.060
  2. Study on structure and electrochemical properties of carbon-coated monoclinic Li3V2(PO4)3 using synchrotron based in situ X-ray diffraction and absorption vol.569, 2013, https://doi.org/10.1016/j.jallcom.2013.03.188
  3. Layered-Layered-Spinel Cathode Materials Prepared by a High-Energy Ball-Milling Process for Lithium-ion Batteries vol.8, pp.1, 2016, https://doi.org/10.1021/acsami.5b08906
  4. Enhanced High-Temperature Performance of LiNi0.6Co0.2Mn0.2O2Positive Electrode Materials by the Addition of nano-Al2O3during the Synthetic Process vol.19, pp.3, 2016, https://doi.org/10.5229/JKES.2016.19.3.80
  5. Li+-Ion Extraction/Insertion of Ni-Rich Li1+x(NiyCozMnz)wO2(0.005https://doi.org/10.1002/celc.201500160
  6. In operando neutron diffraction study of a commercial graphite/(Ni, Mn, Co) oxide-based multi-component lithium ion battery vol.326, 2016, https://doi.org/10.1016/j.jpowsour.2016.06.105
  7. Activating layered LiNi 0.5 Co 0.2 Mn 0.3 O 2 as a host for Mg intercalation in rechargeable Mg batteries vol.96, 2017, https://doi.org/10.1016/j.materresbull.2017.04.047
  8. Design, synthesis, and performances of double-shelled LiNi0.5Co0.2Mn0.3O2 as cathode for long-life and safe Li-ion battery vol.265, 2014, https://doi.org/10.1016/j.jpowsour.2014.04.107