• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.301-309
• /
• 2006

KDC-1 canister for PWR spent fuels which will be used for the Korean Reference Disposal System was developed. The structural analysis of the canister was carried out as a part of the safety analysis. Two conditions, disposal condition and handling condition, were considered for the structural analysis. Three kinds of load cases, normal, abnormal and rock movement, were considered for the disposal condition. The results of the calculation showed that the safety factors from the structural analysis were greater than the design requirements. Two accident scenarios, gripper failure accident and canister drop accident, were analyzed for the handling condition. According to the gripper failure scenario analysis, the handling machine with grippers could be used even in the cases that one or two grippers failed. The maximum von Mises stress from the canister drop accident scenario was 0.762 MPa, which was negligible compared with the yield stress of nodular cast iron. The proposed KDC-1 canister for PWR spent fuels proves to be safe under the repository condition that is based upon the Korean reference disposal system according to the structural analysis for disposal condition and handling condition.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.109-118
• /
• 1993

Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

• Fisheries and Aquatic Sciences
• /
• v.22 no.12
• /
• pp.31.1-31.12
• /
• 2019

Background: The black-chinned tilapia, Sarotherodon melanotheron, is the most abundant fish species in the Nakwa (an open lagoon) and Brenu (a closed lagoon) in the Central Region of Ghana. Aspects of the life history characteristics and the ecology of the fish populations in both lagoons were studied to assess the bio-ecological status of this important resource. Methods: Fish samples were obtained from fishermen that fish on the Nakwa and Brenu lagoons using cast, drag and gill nets. The age of the fish was assessed from otoliths analysis and its growth modelled following the von Bertalanffy growth function. Morphometric characteristics of the fish populations were analysed using power regression and ANOVA for parameters comparisons, and Student's t test to determine whether species grew isometrically. The percentage occurrence method was used to analyse the stomach contents of the fish. Results: A total of 382 fish samples from both lagoons were measured, comprising 209 from Nakwa lagoon and 176 from Brenu lagoon. The size and weight of fish samples ranged between 3.9-11.5 cm total length and 1.0-27.3 g for Nakwa Lagoon and 5.6-12.8 cm total length and 3.2-29.8 g for the Brenu Lagoon. The estimated von Bertalanffy growth parameters were L∞ = 12.04 cm and K = 2.76/year for the Nakwa Lagoon samples and L∞ = 13.44 cm and K = 3.27/year for Brenu Lagoon samples. Daily otolith incremental rate ranged from 0.01-0.03 mm per day to 0.01-0.02 mm per day for Nakwa and Brenu lagoons, respectively. Stomach content analysis of the fish samples revealed that the species are planktivorous and the range of food varied between the lagoons. Green algae were the most prevalent food item in the stomachs of the fish samples from Nakwa with the frequency of 69% whilst diatoms (80.5%) were most prevalent phytoplanktonic food item for the fish in Brenu lagoon. Conclusions: The estimates of asymptotic length for the species in both lagoons are close to known values of the species length at first sexual maturity and points to intensive fishing pressure. As a consequence, a comprehensive sample-based survey is required in both lagoons to derive estimates of management reference points. The results of the stomach content analysis are beneficial to the construction of diet matrix for ecosystem models of the two systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.54-63
• /
• 2018

In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.361-366
• /
• 1986

Fracture of the carpal scaphoid bone is the most common fracture of the carpus. Unfortunately. nonunion are common since the symptoms do not alert patients to seek early medical treatment and the diagnosis is easily missed. Fracture of the scaphoid is a common condition whose management remains controversial. The conservative treatment has many complications, these include inability to work while in plaster, stiffness of the wrist afterwards, muscle wasting, weakness and malunion. So various operative treatments of scaphoid fracture have been developed. Open reduction by use of screws suggested by Maclaughlin first in 1954. In 1984 a new and simple operative technique has been developed to provide rigid internal fixation for all types of fractures of the scaphoid by T.J. Herbert. This involves the use of a double-treaded bone screw which provides good fixation that, after operation, a plaster cast is rarely required and most patients are able to return to work within a few weeks. Authors have experienced 10 cases of scaphoid fracture and accomplished good result in all cases by internal fixation using Herbert screw. The results are as follows : Of these 10 fractures, 2 were fresh fractures and 8 were non unions of scaphoid fracture. In nonunion cases, the time interval between fracture and operation was from 5 months to 5 years. The postoperative immobilization period was average of 4 weeks. Short period of immobilization achieved early functional recovery of the wrist. The bony unions in roentgenogram were seen from 3 months to 9 months after operation. In 2 cases the fracture gap was seen after 9 months. But in these cases the symptoms such as pain and range of motion of wrist were improved.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of Pharmacopuncture
• /
• v.18 no.4
• /
• pp.45-50
• /
• 2015

Objectives: In this study, we investigated the 4-week repeated-dose oral toxicity of gami-jakyak gamcho buja decoction (Mecasin) to develop safe treatments. Methods: In order to investigate the 4-week oral toxicity of Mecasin, we administered Mecasin orally to rats. Sprague-Dawley (SD) rats were divided into four groups of five male and five female animals per group: group 1 being the control group and groups 2, 3, and 4 being the experimental groups. Doses of Mecasin of 500, 1,000, and 2,000 mg/kg of body weight were administered to the experimental groups, and a dose of normal saline solution of 10 mL/kg was administered to the control group. We examined the survival rate, weight, clinical signs, and gross findings for four weeks. This study was conducted under the approval of the Institutional Animal Ethics Committee. Results: No deaths occurred in any of the four groups. No significant changes in weights or food consumption between the control group and the experimental groups were observed. Serum biochemistry revealed that some groups showed significant decrease in inorganic phosphorus (IP) (P < 0.05). During necropsy on the rats, one abnormal macroscopic feature, a slight loss of fur, was observed in the mid dosage (1,000 mg/kg) male group. No abnormalities were observed in any other rats. In histopathological findings, the tubular basophilia and cast of the kidney and extramedullary hematopoiesis of the spleen were found. However, those changes were minimal and had occurred naturally or sporadically. No other organ abnormalities were observed. Conclusion: During this 4-week, repeated, oral toxicity test of Mecasin in SD rats, no toxicity changes due to Mecasin were observed in any of the male or the female rats in the high dosage group. Thus, we suggest that the doses in a 13-week, repeated test should be 0, 500, 1,000, and 2,000 mg/kg respectively.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.93-104
• /
• 2018

Purpose - This study is to investigate the relationship among emotional intelligence, self-efficacy and job stress of foreign life insurance consultants focusing on the mediating effect of self-efficacy. Regarding job security, in general foreign life insurance companies in Korea have more severe working conditions in terms of required contract performance. For foreign life insurance consultants, they are assumed to need higher level of emotional intelligence and self efficacy to meet the conditions. In this study, focus is cast on these aspects. Research design, data, and methodology - Basically the research is conducted upon questionnaires responded by foreign life insurance consultants. That is, data are collected from 255 sample of insurance consultants who work for a foreign owned life insurance company. The Questionnaire measure the level of emotional intelligence, self-efficacy and job stress of insurance consultants. The data are analyzed using pearson's correlation coefficient and hierarchical multiple regression, descriptive statistics, t-test, ANOVA, Durbin-Watson test. Results - The general characteristics of respondents are gender, age, marital status, education level, income monthly, career length, change jobs no, working day per week, call no. per week, meeting no. with client per week, contract regularity, contract no. per month and cancellation contract per year. The mean of emotional intelligence is 2.63, self-efficacy is 3.44 and job stress is 2.20. Emotional intelligence is composed with mean value of self emotion appraisal(3.93), other's emotion appraisal(3.78), regulation of emotion(3.29) and use of emotion(3.52). The mean of self efficacy is composed with mean value of self-confidence(3.41), self-regulated efficacy(3.59) and preference task difficulty(3.30). The job stress is composed with mean value of job requirement(2.61), lack of job autonomy(1.99), conflict of personal relations(1.99), job instability(2.38), organizational system(2.19) and inappropriate compensation(2.07). There is a significant positive correlation between emotional intelligence and self-efficacy. The emotional intelligence and self-efficacy are significantly negative correlation with job stress. The self-efficacy is showed a mediating variable between emotional intelligence and job stress. Conclusions - To decrease job stress level, foreign life insurance company should find the factors to improve the emotional intelligence and self-efficacy of life insurance consultants, and develop appropriate plans using a mediating role of self- efficacy between emotional intelligence and job stress.

• Strategy21
• /
• s.30
• /
• pp.143-176
• /
• 2012

We are witnessing the growing maritime tension on the East Asian sea these days. Each naval powers in the region are competing each other to acquire more advanced naval capabilities. Based upon the rapid economic development, China is actively beefing up its naval capabilities and expand its boundary of naval activities all over the East Asian region. Chinese Navy already unveiled its expansive naval strategy replacing the traditional concept of 'Near-Sea Defense' with the new concept of 'Far-Sea Defense' strategy. In response to potential rival's naval build up, the U.S. is redeploying its naval forces focusing on the Asia-Pacific region. The U.S. enhances its joint naval exercises with the countries in the region, such as Japan, India, Australia and so on. In addition, Washington is devising new naval strategy under the concept of 'Air-Sea Battle' to deter Peking's so-called 'Anti-Access/ Area Denial(A2AD)' strategy. As a close ally of the U.S., Japan also disclosed its clear intention to strengthen the Maritime Self Defense Force(MSDF)'s capabilities by introducing the new concept of 'Dynamic Defense Force' in 2011. Under the new concept, JMSDF is pursuing the additional acquisition of submarines, quasi-aircraft carriers, Aegis-equipped destroyers, etc. Under the new president's strong leadership, Russia is also invigorating the naval build-up. Especially, Russia is fortifying the Pacific Fleet's naval assets by deploying new-type of naval ships such as the Mistral which was imported from France. In the midst of competitive naval build-up among the major naval powers in the region, we are observing the growing maritime conflicts on the East China Sea as well as South China Sea. Those naval conflicts can pose severe threats to our national interests. Maritime conflicts on the East or South China Sea can imperil our sea lanes which will be indispensible for national economic development. Neighboring countries' maritime conflicts also will cast an uncertainty on the path to mobilize international cooperation to resolve the North Korean issues. We should contribute to ease the maritime tension in the region by various ways. First, we should actively galvanize the bilateral maritime dialogue among the major naval powers in the region. Second, we also should take the lead to form a multilateral maritime cooperation mechanism in the region. Above all, we should set the aim to be a peaceful maritime power who can contribute to a building of stable maritime order in the region with a considerable naval power.

• Journal of Labour Economics
• /
• v.30 no.2
• /
• pp.1-31
• /
• 2007

The purpose of this paper is to analyse wage differentials between non-regular and regular works. Data from EAPS(Economically Active Population Survey) 2005 show that the monthly wage level of non-regular worker is only 63% of regular worker and thus there exist 37% wage differentials. However, these wage differentials do not control for hours of work, the amount of human capital, job characteristics, and other individual characteristics affecting wages. If these variables are added to the hourly wage regression equation, the wage gap between non-regular and regular workers drastically decreases to 2.2%. Furthermore, decomposition of the wage differentials by Oaxaca method shows that productivity difference between non-regular and regular workers explains up to 91% of the wage gap. This implies that the magnitude of wage discrimination against non-regular workers is at most 0.2% of hourly wage of regular workers. To control for unobserved individual heterogeneities more accurately, we also construct panel data and estimate wage differentials. The results from the panel data approach show that there is no difference in the hourly wages between non-regular and regular workers. In some specifications, the wage rate of non-regular worker is rather higher than that of regular worker. These results are consistent with economic theory. Other things being equal, workers with unstable employment may require higher wages to compensate their unstability. Firms are willing to pay higher wages if they can get more flexibility from non-regular employment. Empirical results in this paper cast doubt on the view that there is wage discrimination against non-regular workers in the labor market. Public policies should be targeted for disadvantaged groups among non-regular workers, not for non-regular workers in general.