• 제목/요약/키워드: cascade impactor

검색결과 103건 처리시간 0.028초

수질에 대한 대기건식침적의 영향 - 건식침적량 추정 방법론의 비교를 중심으로 (Effect of Dry Deposition on Water Quality -The comparison of several methodologies for estimating dry deposition flux)

  • 정장표
    • 상하수도학회지
    • /
    • 제22권1호
    • /
    • pp.159-168
    • /
    • 2008
  • A special field experiment has been carried out from March 2001 to June 2001 at the Changhowon in Kyunggi to investigate a better methodology for the estimation of dry deposition of pollutions applicable in Korea. In this study, dry deposition plate was used to measure of total and water soluble acidic mass fluxes, and CPRI(Coarse Particle Rotary Impactor), CI(Cascade Impactor) were also used to measure ambient concentrations in various particle size ranges. Sehmel-Hodgson model was used to estimate dry depostion velocity and Weibull probability distribution function was applied to get generalized particle size distribution for the size fractioned concentration data sampled by CPRI and CI. Atmospheric dry deposition fluxes of mass and ionic matters estimated by the various techniques(one-step, multi-step, equi-concentration, subdivision for only the coarse particle range, applying Weibull distribution function, etc.) were compared to flux data sampled by DDP. It was found out that the deposition fluxes estimation methodology calculated by the each particle size range devided by particle size distribution characteristics and the rapidly changed points of deposition velocity using Weibull probability distribution function was the most applicable.

수도권지역 미세입자의 입경분포 (Particle Size Distribution of Seoul Metropolitan Area)

  • 유민경;조석연;한진석;이석조
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2003년도 춘계학술대회 논문집
    • /
    • pp.195-196
    • /
    • 2003
  • 대기에서 입경에 따른 먼지의 무게농도를 측정하는 방법은 cascade impactor와 MOUDI(Micro-Orifice Uniform Deposit Impactor) 등이 비교적 잘 정립되어 있는 반면, 입경에 따른 먼지 개수를 측정하는 방법에 대한 연구는 아직 미진한 상태이다(McMurry, 2000). 현재 시도되고 있는 먼지 입경별 개수 측정방법은 SMPS와 APS를 결합하여 직경 0.005~10 $\mu\textrm{m}$에 이르는 먼지의 입경에 따른 개수를 측정하는 방법이다. 그러나, 일반대기 조건에서 SMPS와 APS의 정확성이 문제시되는데, 특히0.5~10$\mu\textrm{m}$의 먼지를 대상으로 하는APS는 대기에서 포집 효율이 낮을 수 있으며 또한 저농도에 대한 정확성도 문제시될 수 있다(Shen et al, 2002; Kim et al., 2002) (중략)

  • PDF

대기중 에어로졸 입경분포의 변화 (Variations of Aerosol Size Distribution on Ambient Air)

  • 김신도;안기석;김종호;김태식
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 1999년도 추계학술대회 논문집
    • /
    • pp.83-84
    • /
    • 1999
  • 시정악화나 광화학 스모그를 비롯하여 지구 온난화에 부유 입자상 물질이 미치는 영향 등을 파악하기 위해선 중량농도, 화학적 성분분석 등과 함께 그 입경별 크기 분포도 반드시 고려되어야만 한다. 입경분포 측정을 위하여 다단식 임팩터(Cascade Impactor)나 광학입자계수기(OPC, Optical Particle Counter), Aerosizer, SMPS (Scanning Mobility Particle Sizer), EAA(Electrical Aerosol Analyzer) 등 이주로 사용되고 있다.(중략)

  • PDF

상압 다단임팩터의 설계 및 성능평가 (Design and Evaluation of Atmospheric Cascade Impactor)

  • 권순박;임경수;이규원;지준호;배귀남
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 춘계학술대회 논문집
    • /
    • pp.219-220
    • /
    • 2000
  • 대기 중에 부유하는 입자상 물질을 크기별로 측정하는 기술은 크게 입자의 전기적 특성, 광학적 특성 및 공기역학적 특성을 이용하는 방법이 널리 사용된다. 이중 입자의 공기역학적 특성, 다시 말해 입자의 관성력을 이용한 다단임팩터는 설계 및 제작이 용이하고, 입경별 분리능력이 우수하기 때문에 대기 에어로졸의 입경분포 측정에 가장 많이 사용되고 있다. 본 연구의 목표는 분리입경이 각각 10, 5, 2.5, 1 $\mu\textrm{m}$ 인 상압 4단임팩터를 설계, 제작하여 성능평가하는 데 있다. (중략)

  • PDF

입자상물질(PM) 실시간 모니터링을 위한 코로나 입자하전기의 실험적 연구 (Experimental Study on a Corona Charger for Real-time Monitoring of Particulate Matter (PM))

  • 권순박;정정선;이규원
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 춘계학술대회 논문집
    • /
    • pp.227-228
    • /
    • 2002
  • 대기오염물질 중 입자상물질(particulate matter, PM)의 크기분포 측정은 주로 다단임팩터(cascade impactor)에 의해 이루어지고 있다. 임팩터 각 단에 포집된 입자의 무게를 측정하여 입자상물질의 크기 분포로 환산하는 다단임팩터는 입자의 샘플링에 많은 시간이 소모되며 필터의 전처리 및 무게측정과정이 번거롭고, 시간에 따른 농도분포의 추이를 파악할 수 없는 단점이 있다. (중략)

  • PDF

전기적 다단임팩터(ECI)와 ELPI의 측정 전류값 비교 연구 (Comparison of Measured Currents from Electrical Cascade Impactor (ECI) and ELPI)

  • 권순박;박현설;정정선;이규원
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 추계학술대회 논문집
    • /
    • pp.322-323
    • /
    • 2002
  • 다단임팩터와 입자하전기, 전류측정기를 결합하여 입자상물질의 크기분포를 실시간으로 모니터링 할 수 있는 기술에 대하여 기초적인 연구는 선행연구에서 수행되었으며, 다단임팩터의 성능평가 결과는 권순박 등(2002a)이 발표하였으며, 입자하전기에 대한 성능평가결과는 권순박 등(2002b)이 보고하였다. 이에 본 연구에서는 다단임팩터와 입자하전기 및 전류측정장치를 결합하여 입자상물질 실시간 모니터링을 위한 측정장치를 개발하였다. (중략)

  • PDF

Evaluation of genotoxic potentials in diesel exhaust particulate matter with the Ames test, the comet assay and the micronucleus assay

  • Kim, Soung-Ho;Lee, Do-Han;Han, Kyu-Tae;Oh, Seung-Min;Chung, Kyu-Hyuck
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
    • /
    • pp.165.1-165.1
    • /
    • 2003
  • This research was designed to examine the presence of mutagenic/carcinogenic compounds in airborne pollutants in diesel particulate matter using an integrated biological approach. Respirable air borne particulate matter (PM2.5: <2.5mm) was collected from diesel engine exhaust using a high-volume sampler equipped with a cascade impactor. (omitted)

  • PDF

일부 석탄광산 기중 부유분진의 입경 분포와 호흡성 분진 비율 (Size Distributions and Respirable Mass Fractions of Airborne Coal Dust in Underground Coal Mines)

  • 윤영노;김영식
    • 한국산업보건학회지
    • /
    • 제1권1호
    • /
    • pp.62-67
    • /
    • 1991
  • 석탄광산에서 발생하는 갱내 부유분진의 입경분포와 부유분진 중에서 호흡성 분진이 차지하는 비율을 파악하기 위하여 태백, 화순, 점촌 지역의 일부 석탄광산을 대상으로 조사한 결과를 요약하면 다음과 같다. 1. 굴진막상의 부유분진의 입경이 가장 작으며 대표입경이 ACGlH(1989)에서 정의한 호흡성 분진의 입경보다 작고 채탄막장의 입경은 호흡성 분진의 입경과 같으며 선탄장의 입경도 기관지 침착성 분진의 입경을 나타내고 있다. 2. 굴진부서의 공기 중에 부유하고 있는 분진 중에서 호흡성 분진이 차지하는 비율이 다른 부서에 비하여 가장 높게 나타났다.

  • PDF

PMF 모델을 이용한 용인-수원경계지역에서의 부유분진의 크기별 오염원 확인 (Source Identification of Ambient Size-by-Size Particulate Using the Positive Matrix Factorization Model on the Border of Yongin and Suwon)

  • 오미석;이태정;김동술
    • 한국대기환경학회지
    • /
    • 제25권2호
    • /
    • pp.108-121
    • /
    • 2009
  • The suspended particulate matters have been collected on membrane filters and glass fiber filters by an 8-stage cascade impactor for 2 years (Sep. 2005${\sim}$Sep. 2007) in Kyung Hee University-Global Campus located on the border of Yongin and Suwon. The 20 chemical species (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, $Na^+$, ${NH_4}^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were analyzed by an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on these chemical information, the PMF receptor model was applied to identify the source of ambient size-by-size particulate matters. The receptor modeling is the one of the statistical methods to achieve resonable air pollution management strategies. A total of 10 sources was identified in 9 size-ranges such as long-range transport, secondary aerosol, $NH_{4}NO_{3}$ related source, coal combustion, sea-salt, soil, oil combustion, auto emission, incineration, and biomass burning. Especially, the secondary aerosol source assorted in fine and coarse modes was intensively studied.

규조토 분진 측정 및 분석 방법의 비교에 관한 연구 (A Study on Evaluation for Sampling and Analytical Methods of Diatomaceous Earth Dust)

  • 임현술;김지용;정희경
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.212-225
    • /
    • 1995
  • This study was performed in a diatomite factory located at Pohang City, Kyeongsangbuk-Do. The major objectives were to evaluate sampling and analytical methods of diatomaceous earth dust. Concentrations of total and respirable diatomaceous earth dust were measured. Size distribution of dust was analyzed by a personal cascade impactor and the particle size analyzer which is an application of multiple diffraction method. Also crystalline silica in respirable and total dust samples was analyzed quantitatively by X-ray diffraction and Fourie Transform Infrared Spectroscopy(FTIR). The results were as follows: The airborne total and respirable dust concentrations, particle size distribution, and cristalline silica(quartz) concentrations showed approximately a log-normal distribution. The means of totaldust concentrations at flour maufacturing, fire brick grinding and packaging processes exceeded the Korean and American Conference of Governmental Industrial Hygienists standards, $10mg/m^3$. The size distribution of diatomaceous earth dust was log-normal and identified as the rspirable particle mass and thoracic particle mass. The crystalline silica in respirable and total dust samples was identified to quartz and contained about 10 % in those samples. Finally, it is necessary to study the applicability of multiple diffraction for particle size distribution to compare the ACGIH's size selective sampling with other materials containing crystalline silica. Also, advanced quantitative study to X-ray diffraction and FTIR methods shoud be carried out 10 verify general and specific characteristics for respirable crystalline silica.

  • PDF