A Study on Evaluation for Sampling and Analytical Methods of Diatomaceous Earth Dust

규조토 분진 측정 및 분석 방법의 비교에 관한 연구

  • Lim, Hyun Sul (Department of Preventive Medicine, College of Medicine, Dongguk University) ;
  • Kim, Ji Yong (Department of Preventive Medicine, College of Medicine, Dongguk University) ;
  • Cheong, Hoe Kyeong (Department of Preventive Medicine, College of Medicine, Dongguk University)
  • 임현술 (동국대학교 외과대학 예방의학교실) ;
  • 김지용 (동국대학교 외과대학 예방의학교실) ;
  • 정희경 (동국대학교 외과대학 예방의학교실)
  • Published : 1995.11.10

Abstract

This study was performed in a diatomite factory located at Pohang City, Kyeongsangbuk-Do. The major objectives were to evaluate sampling and analytical methods of diatomaceous earth dust. Concentrations of total and respirable diatomaceous earth dust were measured. Size distribution of dust was analyzed by a personal cascade impactor and the particle size analyzer which is an application of multiple diffraction method. Also crystalline silica in respirable and total dust samples was analyzed quantitatively by X-ray diffraction and Fourie Transform Infrared Spectroscopy(FTIR). The results were as follows: The airborne total and respirable dust concentrations, particle size distribution, and cristalline silica(quartz) concentrations showed approximately a log-normal distribution. The means of totaldust concentrations at flour maufacturing, fire brick grinding and packaging processes exceeded the Korean and American Conference of Governmental Industrial Hygienists standards, $10mg/m^3$. The size distribution of diatomaceous earth dust was log-normal and identified as the rspirable particle mass and thoracic particle mass. The crystalline silica in respirable and total dust samples was identified to quartz and contained about 10 % in those samples. Finally, it is necessary to study the applicability of multiple diffraction for particle size distribution to compare the ACGIH's size selective sampling with other materials containing crystalline silica. Also, advanced quantitative study to X-ray diffraction and FTIR methods shoud be carried out 10 verify general and specific characteristics for respirable crystalline silica.

Keywords

Acknowledgement

Supported by : 작업환경측정기술협의회