• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.600-608
• /
• 1996

리튬 이온이 intercalation되어 스핀넬 구조를 이루고 있는 $Li_{x}Mn_{2}O_{4}(0.2{\leq}x{\leq}2.0)$의 구조적 특성을 X-선 회절분석과 Li/1M $LiClO_{4}$-propylene carbonate solution/$Li_{x}Mn_{2}O_{4}$ 전지에서 이들의 구조적 특징에 의한 전기화학적 특성을 연구하였다. $Li_{x}Mn_{2}O_{4}$의 전기화학적 특성에 대한 조성과 반응온도의 영향은 상전이 현상과, 결정 상수 측정과 열분석에 의하여 연구하였다. 산처리 후 $Li_{x}Mn_{2}O_{4}$는 거의 순수한 ${\lambda}-MnO_{2}$구조로 상전이 되었으며 이때 격자상수 $a_{c}$가 8.255에서 $8.031\;{\AA}$으로 수축되었다. $Li_{x}Mn_{2}O_{4}$의 조성 범위가 $0.2{\leq}x{\leq}0.6$일 때 격자상수 $8.255\;{\AA}$의 단일상을 나타내며 3.9~3.7 V의 전위 평탄 영역을 나타낸다.

• 청정기술
• /
• 제19권3호
• /
• pp.306-312
• /
• 2013

드레이톤 탄으로부터 제조된 차(char)의 $850^{\circ}C$ 등온조건 가스화 반응에서 반응기체인 이산화탄소-질소 혼합기체의 이산화탄소 농도가 반응속도에 미치는 영향에 대해 알아보았다. 저온 가스화 반응성을 높이기 위해 탄산칼륨을 사용하였다. 이산화탄소의 농도가 증가할수록 차-이산화탄소(char-$CO_2$) 가스화 반응성은 좋으며 전환율 증가 속도는 고농도에서는 일정하게 유지되었다. 가스화 반응성은 증가하였으며, 70% 이상의 고농도 조건에서는 일정하게 유지되었다. 기-고체 반응모델 중에서 shrinking core model (SCM)과 shrinking core model (SCM), modified volumetric reaction model (MVRM)을 비교하였다. 선형 회귀를 통해 얻은 상관계수 값은 저농도에서는 SCM이 VRM보다 높은 반면, 고농도에서는 VRM이 SCM보다 높은 값을 보였다. 모든 농도에서 MVRM의 상관계수 값은 다른 모델들 보다 가장 높은 값을 보였다.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.211-216
• /
• 2018

폐니켈수소전지에 함유된 희토류들의 회수는 자원 재활용을 위한 중요한 이슈 중의 하나이다. 본 논문에서는 폐니켈수소전지에 함유된 주요 희토류 성분 중의 하나인 란탄의 회수와 산화물로 전환되는 메커니즘 연구를 위하여, 재활용 공정에서 확보되는 희토류 침전물($NaRE(SO_4)_2{\cdot}H_2O$, RE = La, Nd, Ce)과 같은 단일 조성의 $NaLa(SO_4)_2{\cdot}H_2O$ 분말을 합성하였다. 합성된 분말은 $70^{\circ}C$에서 진행된 탄산나트륨과의 이온치환반응을 통해 판상형의 $La_2(CO_3)_3{\cdot}xH_2O$ 결정상을 나타냈으며, 비교를 위해 상온에서 진행된 치환 반응을 진행하였다. 이후 산화란탄 합성을 위해 TG 분석 결과를 바탕으로, $La_2(CO_3)_3{\cdot}xH_2O$ 분말을 $300^{\circ}C$, $500^{\circ}C$ 및 $1000^{\circ}C$에서 후열처리를 진행하였으며, 이에 따른 결정구조의 변화를 분석하였다. FESEM 결과 본 연구에서 합성된 각각의 분말들은 각기둥($NaLa(SO_4)_2{\cdot}H_2O$), 판상($La_2(CO_3)_3{\cdot}xH_2O$) 및 특정 형상 없이 불규칙적으로 응집된 형태($La_2O_3$)를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.134-134
• /
• 2010

Fuel cell is a device that directly converts chemical energy in the form of a fuel into electrical energy by way of an electrochemical reaction. In the anode for a high temperature fuel cell, nickel or nickel alloy has been used in consideration of the cost, oxidation catalystic ability of hydrogen which is used as fuel, electron conductivity, and high temperature stability in reducing atmosphere. Most MCFC stacks currently operate at an average temperature of $650^{\circ}C$. There is some gains with decreased temperature in MCFC to diminish the electrolyte loss from evaporation and the material corrosion, which could improve the MCFC life. However, operating temperature has a strong related on a number of electrode reaction rates and ohmic losses. Baker et al. reported the effect of temperature (575 to $650^{\circ}C$). The rates of cell voltage loss were 1.4mV/$^{\circ}C$ for a reduction in temperature from 650 to $600^{\circ}C$, and 2.16mV/$^{\circ}C$ for a decrease from 600 to $575^{\circ}C$. The two major contributors responsible for the change in cell voltage with reducing operation temperature are the ohmic polarization and electrode polarization. It appears that in the temperature range of 550 to $650^{\circ}C$, about 1/3 of the total change in cell voltage with decreasing temperature is due to an increase in ohmic polarization, and the electrode polarization at the anode and cathode. In addition, the oxidation reaction of hydrogen on an ordinary nickel alloy anode in MCFC is generally considered to take place in the three phase zone, but anyway the area contributing to this reaction is limited. Therefore, in order to maintain a high performance of the fuel cell, it is necessary to keep this reaction responsible area as wide as possible, that is, it is needed to keep the porosity and specific surface area of the anode at a high level. In this study effective anodes are prepared for low temperature MCFC capable of enhancing the cell performance by using zirconium hydride at least in part of anode material.

• 한국재료학회지
• /
• 제13권9호
• /
• pp.572-580
• /
• 2003

Synthesizing behavior and microstructural evolution of $CaZrO_3$and $m-ZrO_2$in a thermal reaction process of $ZrSiO_4$-$xCaCO_3$mixtures, where x is 7 and 19, were investigated to determine the addition amount of CaO in CaO:$ZrO_2$:$SiO_2$ternary composition. CaZrO$_3$-Ca$_2$SiO$_4$precursor prepared by the mixture of $ZrSiO_4$and CaCO$_3$in aqueous suspending media was controlled to the acidic (pH=4.0) condition with HCI solution to enhance the thermal reaction. The addition amount of dispersant into the $ZrSiO_4$-$xCaCO_3$slip increased with increasing mole ratio of $CaCO_3$, which was associated with the viscosity of slip. Decarbonation reaction was activated with an increase of the addition amount of $CaCO_3$, showing different final temperatures in $ZrSiO_4$-$7CaCO_3$and $ZrSiO_4$-$19CaCO_3$mixtures as about 980 and 116$0^{\circ}C$, respectively, for finishing decarbonation reaction. The grain morphology was changed to spherical shape for all samples with an increase of sintering temperature. The grain size and phase composition of the synthesized composites depended on the mixture ratio of Zrsi04 and CacO3 powders, indicating that the main crystals were m-ZrO2 ($\leq$3 $\mu\textrm{m}$) and $CaZrO_3$ ($\leq$ 7 $\mu\textrm{m}$) in $ZrSiO_4$$>-7CaCO_3$and $ZrSiO_4$-$19CaCO_3$mixtures, respectively.

• 자원리싸이클링
• /
• 제29권2호
• /
• pp.18-27
• /
• 2020

강원도 삼척시와 평창군, 전라북도 김제시와 고창군 및 경상남도 고령군에서 채취한 62종의 산림골재와 순환골재를 대상으로 알칼리골재 잠재가능성을 평가하기 위해 화학적 실험법인 KS F 2545와 물리적 실험법인 ASTM C 1260을 수행하였다. 화학법 실험결과 규산염계 암석과 탄산염계 암석이 혼재된 경우 알칼리농도감소량이 높게 나타나 알칼리골재 잠재가능성 결과에 교란을 발생시키는 것으로 확인되었다. 62종의 골재 중 용해실리카량이 100 mmol/ℓ를 초과하는 골재는 9종이며, 이들의 물리적 실험결과 모르타르바의 길이증가율이 0.1~0.2%인 골재는 5종, 0.2% 이상인 골재는 2종으로 확인되었다. 화학법과 모르타르바법을 이용한 알칼리골재반응 시험결과, 알칼리골재 잠재반응을 보인 골재는 사암과 응회암이다. 따라서 쇄설성 퇴적암류와 화산 쇄설성 암석 골재를 사용하기 위해서는 알칼리골재 반응 시험들이 필요하다.

• 한국식품영양과학회지
• /
• 제35권9호
• /
• pp.1224-1231
• /
• 2006

고급불포화지방산인 docosahexaenoic acid ethylester (DHAEE)와 sucrose를 transesterification반응을 하여 sucrose ester를 기질 및 촉매의 비율, 반응시간, 용매사용 및 기압 등을 달리하여 합성하고, 합성율을 살펴보았고, 특히, 섭취 시 인체 내에서 이용 가능한 DHA를 함유하고 있으며, hydrophilic한 유화제로써 sucrose fatty acid mono ester의 합성율을 높이는 합성조건을 연구하였다. 무용매 상태에서의 sucrose ester의 합성율이 낮았기 때문에 반응용매로써 dimethyl sulfoxide(DMSO)를 사용하여 몰비율과 반응시간에 따른 합성을 실시하였다. 여러 반응조건 중 DHAEE의 전환율(%)은 sucrose:DHAEE의 몰비율이 1:0.98, 1:0.60, 1:0.40, 1:0.20인 SE#4, SE#5, SE#6, SE#7에서 모두 96% 이상을 나타내었다. 특히, SE#6(1:0.4 mole)에서 반응시간에 따른 전환율과 sucrose ester의 조성변화를 살펴본 결과, 반응시간 1시간일 때 55.3%의 전환율(mono ester 91.6%)을 보였고, 이후 반응 3.5시간일 때에는 97.1%(mono ester 66%)의 전환율을 보였다. 따라서 반응초기에 대부분의 sucrose ester가 합성되며, 특히 반응시간이 길어짐에 따라 mono ester에서 di-, tri- 및 polyester로 그 조성이 점차 변화됨을 확인하였고, 기질 중 DHAEE의 비율이 증가할수록 sucrose mono ester의 생성은 감소한 반면에, sucrose di-, tri- 및 polyester의 생성은 증가함을 확인하였다. 연구된 합성조건 중 sucrose mono ester의 합성은 1:0.2(sucrose:DHAEE)의 몰비율로 2.5시간동안 반응(SE#7)하였을 때 98.5%의 높은 전환율을 보이면서 그 조성은 87.3%로 가장 높게 합성되었다.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.459-469
• /
• 2019

The ozonation of sulfamethoxazole (SMX) was performed at 20℃ using a pilot scale countercurrent bubble column reactor. Ozonation systems were combined with UV irradiation and TiO₂ addition. As the oxidation reaction proceeded in each treatment system, the pH of the sample decreased and in the O₃/UV/TiO₂ system, the pH change was the largest from 4.54 to 2.02. Under these experimental conditions, the scavenger impact of carbonate is negligible. The highest COD and TOC removal rate was observed in the O₃/UV/TiO₂ system due to the UV irradiation and the photocatalytic effect of TiO₂. Also, the highest mineralization ratio(ε) value is 0.2 in the O₃/UV/TiO₂ system, which means theoxidation capacity of the systems. The highest SMX degradation rate constants calculated by COD and TOC values (COD and TOC) were 2.15 × 10^-4 sec^-1 and 1.00 × 10^-4 sec^-1 in the O₃/UV/TiO₂ system, respectively. The activation energy (E_a) of ozone treatment follows the Arrhenius law. It was calculated based on _COD and _TOC. Each activation energy decreased in order of single O₃> O₃/TiO₂> O₃/UV > O₃/UV/TiO₂ system. The result showed that ΔH^≠ is more effective than ΔS^≠ in each SMX ozontaionsystem, that is characteristic of the common oxidation reaction.

• 한국식품영양과학회지
• /
• 제23권4호
• /
• pp.604-613
• /
• 1994

Hydrophilic brown pigments(HBPs) produced during fermentation and aging the domestic Meju and Doenjang were separated by dialysis and chromatography , and their antioxidant activity were measured . The chemical properties of HBP were determined by UV and IR spectrophotometry. HBPs contents were found to be 93.1 mg/g and 183.2mg/g in Meju fermentated for 30 days and 80 days , respectively. The ratio of dialysate to diffusate of the HBPs were appeared to be 70 : 30 and 87 :13 in the Meju fermented for 30 days and 80 days, respectively. and the rtio in the Doenjang aged for 60 days was 91 :9 , indicating that dialysate slowly days, respectively, and the ratio in the Doenjang aged for 60 days was 91 : 9, incidatin that dialysate slowly increased by the fermentation . Both portion exhibited strong antioxidant activity, but more stronger antioxidant activity was found in the dialysate. DEAE-celluose column chromatography showed that dialysate contained more materials eluted by 0.01-0.03M HCI solution than 0.01M acetate buffer, but diffusate showed opposite results. The degree of browning reaction and antioxdiant activity found in the fraction eluted by HCI solution was stronger than that of the fraction eluted by acetate buffer. The fraction eluted from DEAE-cellulose column chormatogrphy was further fractionaged by TLC and found that strong antioxidant activity was present in the fractions which did not possess fluorescenece and showed a negative ninhydrin reaction. TLC fractions of HCI eluant in Meju exhibited a strong absorbance at 260-280nm, but most of other fractions did not show any absorbance at UV region. TLC fractions from dialysate and diffusate showed fairly identical IR spectrum with absorbance at 3400cm-1, 2800cm-3000cm -1, 1600cm, -1 1400cm-1 and 1100 cm-1 , however, in addition to these absorbances, the spectrum from HCI eluant of Meju exhibited a strong absorbance at 1750cm , indicating the carbonic acid or carbonate ester.